Disassembling a Vornado EH1 00115 could be a easy process. Nevertheless, it is essential to strategy the method with warning, utilizing the suitable instruments and following particular steps to keep away from damaging the equipment. Whether or not you are changing a defective element or completely cleansing the unit, understanding the correct disassembly process is important. On this article, we’ll information you thru the steps concerned in taking aside a Vornado EH1 00115, offering clear directions and security precautions to make sure a profitable disassembly.
Earlier than commencing disassembly, collect the mandatory instruments, together with a Phillips head screwdriver, a flathead screwdriver, and a pair of needle-nose pliers. Disconnect the equipment from the ability supply and permit it to chill utterly. Find the screws securing the bottom meeting to the fan housing. Rigorously take away these screws and set them apart in a secure place. Subsequent, gently raise the bottom meeting away from the fan housing, being cautious to not injury any wires or elements. Disconnect {the electrical} connectors by urgent on the discharge tabs and thoroughly pulling the connectors aside.
With the bottom meeting eliminated, you’ll be able to proceed to disassemble the fan housing. Find the screws securing the fan motor to the housing and take away them. Rigorously raise the fan motor out of the housing, taking care to keep away from dislodging any wires or elements. Subsequent, take away the screws securing the fan blades to the fan motor and thoroughly detach the blades. Proceed disassembling the fan housing by eradicating any extra screws or fasteners which may be current. As soon as all elements are separated, examine them completely for any injury or put on. If vital, substitute any defective components earlier than reassembling the equipment.
Eradicating the Base Plate
To take aside the Vornado EH1-00115, you have to first take away the bottom plate. This may be executed by following these steps:
Step 1: Unplug the Fan
Earlier than you start, make sure the fan is unplugged from the ability outlet. This can be a essential security precaution to forestall any electrical accidents.
Step 2: Find the Screws
Flip the fan the other way up and find the 4 screws securing the bottom plate to the fan’s housing. These screws are usually Phillips head screws and could be eliminated utilizing a typical screwdriver.
Step 3: Take away the Screws
Utilizing the screwdriver, rigorously take away all 4 screws. Remember to maintain onto the screws as you take away them, as you have to them later to reassemble the fan.
Step 4: Carry Off the Base Plate
As soon as all 4 screws have been eliminated, gently raise the bottom plate away from the fan’s housing. The bottom plate ought to come off simply with none resistance.
Step 5: Examine the Base Plate
As soon as the bottom plate has been eliminated, examine it for any injury or unfastened wires. If any injury is discovered, it’s advisable to exchange the bottom plate earlier than reassembling the fan.
Disassembling the Column Shaft
To disassemble the column shaft, comply with these steps:
1. Separate the Shaft into Two Items
To separate the column shaft into two items, rotate the shaft slowly till the slots within the decrease shaft align with the clips on the higher shaft. Pull the higher shaft straight as much as detach it from the decrease shaft.
2. Detach the Higher Shaft from the Fan Head
To detach the higher shaft from the fan head, comply with these steps:
- Find the 2 screws on the entrance of the fan head that maintain the higher shaft in place.
- Loosen the screws, however don’t take away them utterly.
- Rigorously raise the fan head up and away from the higher shaft.
3. Take away the Column Shaft from the Base
To take away the column shaft from the bottom, comply with these steps:
- Find the three screws on the underside of the bottom that maintain the column shaft in place.
- Take away the screws.
- Rigorously raise the column shaft straight up and away from the bottom.
Detaching the Motor Housing
As soon as the fan blade has been eliminated, it is time to detach the motor housing. The motor housing is the central a part of the fan, containing the motor and different electrical elements. To detach the motor housing, comply with these steps:
- Find the screws: There are usually 4 screws holding the motor housing in place. These screws are normally situated on the again or backside of the fan.
- Take away the screws: Utilizing a screwdriver, rigorously take away the screws. Remember to maintain onto the screws as you take away them.
- Gently raise the motor housing: As soon as the screws are eliminated, gently raise the motor housing away from the bottom of the fan. The motor housing could also be barely caught, so chances are you’ll want to make use of a little bit power to detach it.
With the motor housing indifferent, now you can entry the motor and different electrical elements for restore or substitute.
Accessing the Motor
As soon as the motor housing is indifferent, you’ll be able to entry the motor. The motor is biasanya situated on the backside of the motor housing. To entry the motor, comply with these steps:
- Disconnect the motor wires: Earlier than dealing with the motor, disconnect the motor wires from the terminal block. The terminal block is normally situated close to the motor.
- Take away the motor mounting screws: There are usually two or three screws holding the motor in place. These screws are normally situated on the edges of the motor.
- Carry the motor out: As soon as the mounting screws are eliminated, gently raise the motor out of the motor housing.
With the motor eliminated, now you can examine it for any injury or put on. If vital, you’ll be able to substitute the motor with a brand new one.
Eradicating the Blower Wheel
Now that you’ve got safely eliminated the entrance cowl and housing, it is time to sort out the blower wheel. This is a step-by-step information:
1. Unplug the Wires
Earlier than you contact the blower wheel, disconnect the wires related to it. Use a pair of needle-nose pliers to softly pull the connectors off the terminals.
2. Take away the Fasteners
Find the screws or bolts holding the blower wheel in place. Relying on the mannequin, there could also be two or extra fasteners. Use an appropriate screwdriver or wrench to take away them.
3. Detach the Blower Wheel
With the fasteners eliminated, rigorously pull the blower wheel straight out of the unit. It could be essential to wiggle it barely to loosen it.
4. Clear and Examine
Take the blower wheel to a clear and well-lit space. Use a comfortable brush or material to softly take away any mud or particles collected on the blades. Totally examine the blower wheel for any injury or put on. Search for cracks, chips, or every other indicators of compromise. If any injury is discovered, it is really useful to exchange the blower wheel with a brand new one.
| Instrument | Description |
|---|---|
| Needle-nose pliers | For disconnecting wires |
| Screwdriver or wrench | For eradicating fasteners |
| Gentle brush or material | For cleansing the blower wheel |
Accessing the Motor
To entry the motor, you have to to take away the bottom of the fan.
1. Flip the fan the other way up and find the 4 screws that maintain the bottom in place.
2. Use a screwdriver to take away the screws.
3. Gently raise the bottom off of the fan.
4. The motor is situated on the backside of the fan.
To take away the motor, you have to to disconnect the wires which can be related to it.
| Wire Coloration | Terminal |
|---|---|
| Black | L |
| White | N |
| Inexperienced | Floor |
5. Use a pair of pliers to disconnect the wires from the motor.
6. As soon as the wires are disconnected, you’ll be able to raise the motor out of the fan.
Changing the Bearings
1. Take away the Fan Head: Unplug the fan and take away the fan head by greedy it firmly and pulling it straight up off the bottom.
2. Detach the Motor Housing: Use a Phillips head screwdriver to take away the screws securing the motor housing to the bottom. Carry the motor housing off the bottom, taking care to not injury the wires.
3. Entry the Bearings: Find the 2 bearings on the motor shaft. They’re usually held in place by a metallic clip or a rubber grommet.
4. Take away the Previous Bearings: Utilizing a small flathead screwdriver or a pair of needle-nose pliers, rigorously pry the metallic clip or take away the rubber grommet to launch the previous bearings.
5. Clear the Space: Earlier than putting in the brand new bearings, completely clear the realm the place they are going to be positioned. Take away any filth, mud, or particles.
6. Set up the New Bearings: Align the brand new bearings on the motor shaft and gently slide them into place. Make sure that the bearings are correctly seated and that the metallic clip or rubber grommet is securely mounted to carry them in place.
7. Reassemble the Fan: Reattach the motor housing to the bottom and safe it with the screws. Place the fan head again on the bottom and plug the fan again in.
Cleansing and Lubricating Elements
To make sure the optimum efficiency and longevity of your Vornado EH1 00115, correct cleansing and lubrication of its elements is important. This is an in depth information to help you on this course of:
Elements to be Lubricated:
| Element | Frequency |
|---|---|
| Motor Bearings | Yearly |
| Oscillation Mechanism | Semi-annually |
| Fan Hub | Quarterly |
Instruments You will Want:
- Phillips head screwdriver
- Flathead screwdriver
- Vacuum cleaner
li>Lubricant (e.g., stitching machine oil, WD-40)
Steps to Lubricate Elements:
1.
Take away the entrance cowl: Use a Phillips head screwdriver to take away the screws holding the entrance cowl. Carry the quilt up and away from the unit.
2.
Find motor bearings: Determine the motor bearings, that are normally situated on the base of the fan meeting.
3.
Apply lubricant: Apply a couple of drops of lubricant to the bearings utilizing the oil can or syringe. Keep away from over-lubricating.
4.
Lubricate oscillation mechanism: Discover the oscillation mechanism, which is answerable for the fan’s side-to-side motion. Apply lubricant to the gears and shifting components.
5.
Lubricate fan hub: Find the fan hub, which is the central a part of the fan meeting. Apply a small quantity of lubricant to the hub and its contact factors with the blades.
6.
Reassemble the unit: Place the entrance cowl again on the unit and safe it with the screws.
7.
Check the fan: Plug within the fan and switch it on to make sure it is working easily and quietly. If any uncommon noises or vibrations happen, re-check the lubrication or search skilled help.
Disassembling The Vornado EH1-00115
1. Unplug the Vornado EH1-00115 from the ability outlet.
2. Take away the again grill by unscrewing the 4 screws that maintain it in place.
3. Disconnect the ability wire from the motor.
4. Take away the 2 screws that maintain the motor in place and raise the motor out of the unit.
5. Take away the 2 screws that maintain the fan blades in place and take away the fan blades.
6. Take away the 2 screws that maintain the entrance grill in place and take away the entrance grill.
7. The Vornado EH1-00115 is now disassembled.
Reassembling The Vornado EH1-00115
1. Insert the fan blades into the motor and safe them with the 2 screws.
2. Place the motor into the unit and safe it with the 2 screws.
3. Join the ability wire to the motor.
4. Place the again grill on the unit and safe it with the 4 screws.
5. Plug the Vornado EH1-00115 into the ability outlet.
6. The Vornado EH1-00115 is now reassembled.
Troubleshooting
In case you are having hassle reassembling the Vornado EH1-00115, verify the next:
* Be sure that the entire screws are tightened securely.
* Be sure that the ability wire is related securely to the motor.
* Be sure that the fan blades are inserted accurately into the motor.
* In case you are nonetheless having hassle, you’ll be able to contact Vornado Buyer Service for help.
| Half | Amount |
|---|---|
| Screws | 6 |
| Fan blades | 2 |
| Motor | 1 |
| Energy wire | 1 |
| Again grill | 1 |
| Entrance grill | 1 |
Troubleshooting Frequent Points
The fan will not be turning on
Examine if the ability wire is securely plugged into each the fan and {the electrical} outlet. Additionally, verify if the circuit breaker or fuse for {the electrical} outlet has tripped.
The fan is making a rattling noise
A rattling noise is normally brought on by a unfastened screw or bearing. Examine all of the screws on the fan and tighten any which can be unfastened. If the noise persists, contact Vornado customer support.
The fan is wobbling
A wobbling fan could be brought on by quite a lot of points, together with a bent fan blade, a unfastened fan base, or uneven flooring. Examine the fan blade for any bends or cracks and straighten it if vital. Tighten the nut that secures the fan base to the column. If the flooring is uneven, attempt inserting the fan on a degree floor.
The fan will not be oscillating
Examine if the oscillation swap is turned on. Whether it is on, attempt unplugging the fan for a couple of seconds after which plugging it again in. If the fan nonetheless doesn’t oscillate, contact Vornado customer support.
The fan will not be blowing robust sufficient
Examine if the air filter is soiled. A grimy filter can prohibit airflow and cut back the fan’s efficiency. Clear the filter based on the producer’s directions.
The distant management will not be working
Examine if the batteries within the distant management are useless. Change the batteries with new ones and check out once more.
The fan is overheating
If the fan is overheating, unplug it and let it calm down for a minimum of half-hour. Examine if the air filter is soiled and clear it if vital. Be sure the fan will not be positioned in a confined house or close to any warmth sources.
The fan is making a buzzing noise
A buzzing noise is normally brought on by a unfastened belt. Tighten the belt based on the producer’s directions. If the noise persists, contact Vornado customer support.
The fan is leaking water
If the fan is leaking water, it’s doubtless that the water tank is overfilled. Empty the water tank and refill it to the right degree. Examine the rubber gasket on the water tank for any leaks and substitute it if vital.
Security Precautions
Unplug the machine: All the time unplug the Vornado fan from the ability supply earlier than trying any disassembly or cleansing.
Permit to chill: The fan should be heat after use. Permit it to chill down utterly earlier than dealing with any components.
Put on gloves: To forestall cuts or scratches, put on gloves when disassembling the fan.
Use a clear workspace: Select a clear and well-lit space to work on the fan.
Take images: Take footage of the fan’s meeting earlier than taking it aside. This can aid you reassemble it accurately later.
Label components: As you disassemble the fan, label the components with masking tape or a marker. This can aid you preserve monitor of which components go the place.
Keep away from utilizing instruments: If doable, keep away from utilizing any instruments to disassemble the fan. Nevertheless, if vital, use solely a screwdriver or different applicable instruments.
Deal with wires rigorously: Watch out when dealing with the fan’s electrical wires. Keep away from pulling or slicing them.
Eliminate components correctly: Upon getting disassembled the fan, eliminate any damaged or broken components correctly.
Reassemble with care: When reassembling the fan, comply with the steps in reverse order. Be sure to tighten all screws and connections securely.
Check earlier than use: As soon as the fan is reassembled, check it to verify it’s working correctly earlier than utilizing it.
Take Aside Vornado EH1 00115: A Complete Information
The Vornado EH1 00115 is a strong and environment friendly air circulator that gives optimum air circulation all through your house. Whereas this equipment is mostly sturdy and dependable, there could come a time when it is advisable to take it aside for upkeep or repairs.
This information will give you step-by-step directions on the best way to safely and successfully disassemble the Vornado EH1 00115. By following these directions, you’ll be able to preserve the optimum efficiency of your air circulator and lengthen its lifespan.
Individuals Additionally Ask
How do I entry the motor of the Vornado EH1 00115?
To entry the motor, you have to to take away the fan head and the bottom. Upon getting eliminated these elements, you will note the motor housing. Take away the screws holding the motor housing in place and thoroughly raise it off. The motor shall be situated contained in the housing.
How do I substitute the fan blades on the Vornado EH1 00115?
To exchange the fan blades, you have to to take away the fan head. Upon getting eliminated the fan head, you will note the fan blades. Take away the screws holding the fan blades in place and thoroughly raise them off. Change the previous fan blades with the brand new ones and safe them with the screws.
