Quilting is an artwork kind that has been handed down by means of generations. For those who’re new to the craft, one of many ending touches that may elevate your quilt is the binding. Making use of quilt binding is just not a troublesome job, nevertheless it does require some endurance and precision to make sure a professional-looking end. By following the steps outlined on this article, you may discover ways to sew on quilt binding with ease.
Earlier than you start, collect all the mandatory supplies: a quilt with unfinished edges, quilt binding material, coordinating thread, scissors, a stitching machine, and an iron. Begin by creating your quilt binding. Measure and lower your binding material strips, then sew them collectively end-to-end to kind one steady strip. As soon as your binding is ready, it is time to connect it to the quilt. Fold the binding strip in half lengthwise and press it with an iron. This may aid you create a clear, crisp edge once you sew it to the quilt.
Align the folded fringe of the binding with the uncooked fringe of the quilt and pin it in place. Use a stitching machine to sew the binding to the quilt, utilizing a small sew size and an identical thread shade. As you sew, make sure to hold the binding flat and easy, and miter the corners for an expert end. After stitching the binding to the entrance of the quilt, flip it to the again and fold it over the uncooked edges. Hand-stitch the binding in place, taking small, even stitches. As soon as the binding is securely connected, press it with an iron for a cultured look. With cautious consideration to element and a little bit of endurance, you may obtain an attractive, skilled end in your quilt binding.
Getting ready the Material and Binding
Slicing the Quilt Material
Earlier than you can begin stitching on the binding, you’ll want to lower the quilt material. The dimensions of the binding will depend upon the dimensions of your quilt. For the standard-sized quilt, you will want to chop the material into strips which are 2 1/2 inches huge and the size of the quilt’s perimeter plus 10 inches. For instance, in case your quilt is 60 inches sq., you will want to chop 4 strips of cloth which are 2 1/2 inches huge and 70 inches lengthy.
To chop the material, use a rotary cutter and a reducing mat. This provides you with probably the most correct cuts. Begin by folding the material in half lengthwise after which in half once more crosswise. This provides you with 4 equal sections. Use the rotary cutter to chop alongside the fold strains to create 4 strips of cloth. Then, unfold the strips and lower them to the specified size.
Getting ready the Binding
As soon as the material is lower, you’ll want to put together the binding. This includes folding the material over and urgent it. Begin by folding one lengthy fringe of the material over by 1/2 inch and urgent it. Then, fold the opposite lengthy edge over by 1/2 inch and press it. Lastly, fold the material in half lengthwise and press it.
The binding is now able to be sewn to the quilt.
Slicing the Bias Binding
Bias binding is a kind of cloth strip that’s lower on the diagonal of the material. This provides it a novel stretchiness that makes it excellent for binding quilts. To chop bias binding, you will want:
- A pointy rotary cutter
- A reducing mat
- A ruler
- Material
Step 1: Decide the width of the bias binding. The width of the bias binding will depend upon the dimensions of your quilt. For many quilts, a bias binding that’s 2.5 inches huge can be enough.
Step 2: Reduce the material strips. To chop the material strips, you will want to chop the material on the diagonal. To do that, begin by folding the material in half, proper sides collectively. Then, make a 45-degree lower alongside the folded fringe of the material. Proceed reducing strips of cloth till you have got reached the specified size.
Step 3: Be part of the material strips. Upon getting lower the entire material strips, you will want to hitch them collectively to create a steady size of bias binding. To do that, merely sew the strips collectively, proper sides collectively, utilizing a 1/4-inch seam allowance. Press the seams open.
| Material | Bias Binding Width |
| Quilting-weight cotton | 2.5 inches |
| Flannel | 3 inches |
| Minky | 3.5 inches |
Becoming a member of the Bias Binding to Type a Loop
To affix the bias binding to kind a loop, you will want to:
-
Fold the top of the binding over by 1 inch (2.5 cm) and press.
Tip: This may assist to stop the binding from fraying. -
Unfold the binding and fold it in half lengthwise, with the uncooked edges aligned.
Tip: This may create a loop that can be used to connect the binding to the quilt. -
Sew the folded fringe of the binding collectively, utilizing a 1/4 inch (6 mm) seam allowance.
Tip: Begin and cease stitching about 1/8 inch (3 mm) from the folded edge. This may assist to maintain the seam from displaying.Listed below are some extra ideas for becoming a member of the bias binding:
Tip Profit Use a pointy needle This may assist to stop the material from snagging. Use a small sew size This may assist to maintain the seam from puckering. Press the seam open This may assist to maintain the seam flat and make it much less seen.
Pinning the Binding to the Quilt
Upon getting the binding lower and sewn, it is time to pin it to the quilt. Begin by aligning the uncooked fringe of the binding with the uncooked fringe of the quilt high. Pin the binding in place, beginning on the heart of 1 facet and dealing your means across the quilt.
As you pin, make certain to drag the binding taut so that it’ll lie flat when it’s sewn down. Nonetheless, do not pull it too tightly, or the material will buckle. Pin the binding each few inches, or extra usually if essential to hold it in place.
Whenever you come to the corners of the quilt, miter the binding to create a neat and tidy end. To miter the binding, fold the binding in half on the nook and crease it. Then, unfold the binding and align the uncooked edges of the binding with the uncooked edges of the quilt high. Pin the binding in place, beginning on the heart of the nook and dealing your means out to the edges.
Proceed pinning the binding across the quilt till you attain the start line. As soon as the binding is pinned in place, you may sew it down utilizing a blind sew or different methodology of your alternative.
Suggestions for Pinning the Binding to the Quilt
-Use sharp pins to make it simpler to pin by means of the layers of cloth.
-Pin the binding taut, however not too tightly.
-Miter the binding on the corners to create a neat and tidy end.
-If you’re having bother pinning the binding, strive utilizing a thimble to guard your fingers.
Here’s a desk with some extra ideas for pinning the binding to the quilt:
| Tip | Description |
|---|---|
| Use quite a lot of pin sizes | Smaller pins can be utilized for delicate materials, whereas bigger pins can be utilized for heavier materials. |
| Pin at an angle | This may assist to stop the material from puckering when it’s sewn. |
| Use a thimble | This may shield your fingers from being pricked by the pins. |
Gathering Supplies
Earlier than you start, collect the mandatory supplies: quilt, quilt binding, matching thread, stitching machine, iron, and ironing board.
Getting ready the Quilt Binding
Reduce the quilt binding into strips which are 2.5 inches huge and lengthy sufficient to wrap across the edges of the quilt with a minimal of 4 inches of overlap on the corners. Be part of the strips along with a mitered or butt seam.
Attaching the Binding with a Lap Seam
Fold the quilt binding in half lengthwise, improper sides collectively. Press the fold with an iron.
Place the folded quilt binding alongside the uncooked fringe of the quilt, with the uncooked edges of the binding aligned with the uncooked edges of the quilt. Pin the binding in place.
Sew the binding to the quilt utilizing a blind sew or a small, working sew. Start stitching at one nook of the quilt and sew all the best way round, overlapping the binding on the corners.
As soon as the binding is sewn on, flip it to the bottom of the quilt and fold the uncooked edges beneath. Press the binding with an iron to safe it in place.
Topstitch the binding to the quilt, utilizing a small, working sew or an ornamental sew. Start topstitching at one nook and sew all the best way round, overlapping the binding on the corners.
Your quilt is now certain and able to take pleasure in!
Desk: Quilt Binding Stitches
| Sew | Description |
|---|---|
| Blind sew | A small, invisible sew that’s used to connect the quilt binding to the quilt. |
| Operating sew | A small, straight sew that’s used to connect the quilt binding to the quilt or to topstitch the binding. |
| Ornamental sew | A sew that’s used so as to add an ornamental aspect to the quilt binding. |
Mitering the Corners
Mitering the corners offers your quilt binding a clear {and professional} end. This is tips on how to do it:
1. Align the Binding with the Nook
Lay the binding alongside one facet of the nook, aligning the uncooked edge with the folded fringe of the quilt.
2. Measure and Mark the Fold
Measure the space from the nook to the other fringe of the binding. Add 1/4 inch to this measurement and mark it on the binding.
3. Fold the Binding
Fold the binding on the marked level, aligning the uncooked edge with the sting of the quilt.
4. Measure and Mark the Second Fold
Measure the space from the nook to the folded fringe of the binding. Subtract 1/8 inch from this measurement and mark it on the binding.
5. Fold the Binding Once more
Fold the binding on the second marked level, aligning the uncooked edge with the sting of the quilt.
6. Pin and Sew the Nook
Pin the binding securely in place, beginning on the level the place the 2 folds meet. Sew across the nook, pivoting the needle at every level and persevering with till you attain the start line.
This is a extra detailed desk with step-by-step directions for stitching the nook:
| Step | Directions |
|---|---|
| 1 | Fold the binding at a 45-degree angle, aligning the uncooked edge with the sting of the quilt. |
| 2 | Sew alongside the folded edge, leaving a 1/8-inch seam allowance. |
| 3 | Unfold the binding and fold it in the wrong way, aligning the uncooked edge with the sting of the quilt. |
| 4 | Sew alongside the folded edge, leaving a 1/8-inch seam allowance. |
| 5 | Trim the surplus binding on the nook. |
Ending the Outer Fringe of the Binding
7. Machine Stitching the Binding
Utilizing a Strolling Foot
Connect a strolling foot to your stitching machine. This may assist to evenly feed the material layers and stop them from shifting whilst you sew.
Sew Size and Rigidity
Set your sew size to about 2.5mm. Alter the stress barely looser than normal, as this may assist to maintain the stitches from puckering the material.
Beginning and Ending
Begin stitching about 6 inches from the nook of the quilt. Overlap the beginning and finish of the binding by about 1/2 inch, and backstitch over the overlapped space to safe it.
Stitching the Corners
Whenever you attain a nook, fold the binding diagonally at a 45-degree angle. Align the folded edge with the quilt edge and proceed stitching down the following facet.
Mitering the Corners
For a mitered nook, lower the binding at a 45-degree angle on each ends. Fold the binding over the quilt nook and align the angled edges. Sew alongside the folded edge, beginning and stopping about 1/4 inch from the nook.
Desk: Sew Size and Rigidity for Machine Stitching Binding
| Sew Size | Rigidity |
|—|—|
| 2.5mm | Barely looser than normal |
Making a Hung Binding
A hung binding is a technique of binding a quilt that permits for straightforward removing and substitute. It’s usually used on massive quilts or quilts that can be saved for prolonged durations.
Supplies:
- Binding material
- Bias tape
- Hand-sewing needle
- Thread
To create a hung binding:
1. Reduce the binding material into strips which are 2-1/2 inches huge and twice the size of the quilt’s perimeter.
2. Fold the binding strips in half lengthwise and press.
3. Pin the binding strips to the correct facet of the quilt, aligning the uncooked edges with the outer fringe of the quilt.
4. Sew the binding strips to the quilt utilizing a 1/4-inch seam allowance.
5. Fold the binding strips to the again of the quilt and miter the corners.
6. Hand-stitch the binding to the again of the quilt utilizing a ladder sew.
7. Reduce the bias tape into strips which are 2 inches lengthy.
8. Fold the bias tape strips in half and pin them to the again of the quilt, perpendicular to the binding. The bias tape strips must be evenly spaced alongside the quilt’s perimeter and must be lengthy sufficient to tie the binding in place.
| Step | Description |
|---|---|
| 1 | Tie the binding to the again of the quilt utilizing the bias tape strips. |
| 2 | To take away the binding, merely untie the bias tape strips. |
| 3 | To interchange the binding, tie the brand new binding to the again of the quilt utilizing the bias tape strips. |
Binding with Ornamental Stitching
Utilizing ornamental stitching provides a novel contact to your quilt binding. This is tips on how to do it:
1. Trim any extra batting or material from the perimeters of the quilt.
2. Fold the binding in half lengthwise, improper sides collectively, and press.
3. Open the binding and fold every edge towards the middle crease.
4. Press the folded edges.
5. Pin the binding to the quilt, aligning the uncooked edges.
6. Sew the binding to the quilt utilizing a straight sew, 1/4 inch from the sting.
7. Fold the surplus binding to the again of the quilt.
8. Mitre the corners to create a clear, completed look.
Ornamental Stitching Choices
There are various totally different ornamental stitches that you should utilize to brighten your quilt binding. Listed below are just a few common choices:
| Sew | Description |
|---|---|
| Blanket sew | A easy and chic sew that creates an ornamental edging. |
| Zigzag sew | A flexible sew that can be utilized to create quite a lot of ornamental results. |
| Satin sew | A easy and glossy sew that’s good for including a contact of luxurious to your quilt. |
| Feather sew | A fragile and complicated sew that’s usually used to brighten clothes and residential décor. |
Experiment with totally different ornamental stitches to search out the one which most closely fits your quilt. Upon getting chosen a sew, comply with the producer’s directions on your stitching machine to use it to the binding.
Urgent and Securing the Binding
10. Ending and Urgent
As soon as the binding has been sewn on, it is time to end and press it correctly. This is an in depth information to make sure a professional-looking end:
- Trim the surplus binding: Reduce off the surplus binding across the edges of the quilt, leaving about 1/4 inch.
- Flip the corners: Fold the binding at every nook and press it right into a neat miter. Trim any extra material if needed.
- Press the binding: Use a sizzling iron to press the binding flat in opposition to the quilt. Keep away from urgent instantly on the stitches to stop them from breaking.
- Safe the corners: Hand-stitch the binding corners securely in place utilizing a small whip sew or a blind sew.
- Press the whole binding: Give the whole quilt one remaining press to set the binding and guarantee a easy end.
11. Utilizing Sew-in-the-Ditch Binding
Sew-in-the-ditch binding is a well-liked methodology for attaching binding with out utilizing hand-stitching. This is a desk summarizing the steps:
| Step | Description |
|---|---|
| 1. | Fold the binding in half lengthwise. |
| 2. | Pin the binding to the entrance fringe of the quilt, aligning the uncooked edges. |
| 3. | Sew the binding to the quilt, staying near the present seam line (within the ditch). |
| 4. | Press the binding flat and switch it to the again of the quilt. |
Methods to Sew on Quilt Binding
Quilt binding is the ultimate step within the quilt-making course of, and it serves each a purposeful and ornamental function. It protects the uncooked edges of the quilt from fraying, and it provides an attractive final touch to the quilt.
There are just a few alternative ways to stitch on quilt binding, however the commonest methodology is to make use of a machine sew. Listed below are the steps on tips on how to sew on quilt binding utilizing a machine:
- Reduce strips of cloth for the binding. The strips must be 2 1/2 inches huge and lengthy sufficient to go across the complete perimeter of the quilt.
- Be part of the strips of cloth collectively utilizing a diagonal seam. This may create a steady strip of cloth that’s lengthy sufficient to go across the complete quilt.
- Fold the binding strip in half lengthwise, with the improper sides collectively. Press the fold.
- Align the uncooked fringe of the binding strip with the uncooked fringe of the quilt. The folded fringe of the binding strip must be dealing with the quilt.
- Sew the binding strip to the quilt utilizing a 1/4-inch seam allowance. Make sure to catch each layers of the binding strip within the stitching.
- As soon as the binding strip is sewn to the quilt, fold the binding strip over the uncooked fringe of the quilt. The folded fringe of the binding strip ought to now be dealing with the again of the quilt.
- Sew the binding strip to the quilt utilizing a blind sew or a topstitch. This may create a completed look to the quilt.
Folks Additionally Ask
How do I end off the corners when stitching on quilt binding?
To complete off the corners when stitching on quilt binding, miter the corners. To do that, fold the binding strip at a 45-degree angle on the nook. Then, fold the opposite facet of the binding strip over the primary fold and sew in place.
What’s the easiest way to press quilt binding?
One of the simplest ways to press quilt binding is to make use of a steam iron. Steam will assist to set the stitches and provides the binding a crisp end.
How do I select the correct material for quilt binding?
When selecting material for quilt binding, take into account the burden and texture of the quilt material. A heavier quilt material would require a heavier binding material, and a lighter quilt material would require a lighter binding material. You also needs to take into account the colour and sample of the binding material. The binding material ought to complement the quilt material and add to the general design of the quilt.
