Binding is the ultimate contact that offers your quilt a completed look. It can be used so as to add an ornamental aspect to your quilt. There are a lot of other ways to stitch binding on a quilt, however the commonest methodology is to make use of a machine. This methodology is comparatively simple to do and may be accomplished in just a few hours.
Earlier than you start, you will want to collect your provides. You have to:
– Quilt binding
– Matching thread
– Stitching machine
– Iron and ironing board
– Scissors
– Measuring tape or ruler
Upon getting gathered your provides, you’ll be able to start stitching the binding in your quilt. First, you will want to measure and reduce the binding strips. The binding strips needs to be reduce to the size of the sting of your quilt, plus 2 inches. For instance, in case your quilt is 50 inches broad, you will want to chop two binding strips which might be every 52 inches lengthy. Subsequent, you will want to fold the binding strips in half lengthwise and press them. It will assist to maintain the binding strips from fraying.
Making ready the Binding
Earlier than you begin stitching, it is necessary to organize your binding strips. It will make sure that they’re the proper measurement and form, and that they are going to be simple to work with.
**Step 1: Minimize the material strips.**
Minimize strips of cloth which might be 2 1/2 inches broad and the size of the quilt’s edges. You have to sufficient strips to go across the complete perimeter of the quilt, plus just a few further for overlap. For a quilt with a 40-inch sq. high, you will want roughly 16 strips, every measuring 2 1/2 inches by 50 inches.
**Step 2: Be a part of the strips.**
Sew the strips collectively finish to finish, utilizing a 1/4-inch seam allowance. Press the seams open.
**Step 3: Fold the binding in half lengthwise.**
Fold the binding strip in half lengthwise, matching the uncooked edges. Press the fold.
**Step 4: Miter the corners.**
To create a mitered nook, fold the binding strip at a 45-degree angle on the nook of the quilt. Unfold the binding and press the crease. Fold the binding over the quilt edge and align the uncooked edges. Sew the binding in place, utilizing a 1/4-inch seam allowance.
**Step 5: Trim the surplus binding.**
As soon as the binding is sewn in place, trim any extra cloth from the start and finish of the strip. Your binding ought to now be the identical size because the quilt’s edges.
| Materials | Quantity |
|---|---|
| Material strips (2 1/2 inches broad) | Size of quilt’s edges + further for overlap |
| Thread | Matching the material |
| Iron and ironing board | – |
Stitching the Binding to the Quilt Prime
Upon getting your binding strips sewn collectively, it is time to sew them to the quilt high. This may be finished by hand or by machine. In case you’re stitching by hand, use a small, sharp needle and a robust thread. Start by folding the binding strip in half and aligning the uncooked edges with the uncooked edges of the quilt high. Sew a operating sew alongside the folded fringe of the binding strip, catching the quilt high as you go. While you attain the tip of the binding strip, overlap the ends by about 1 inch and stitch them collectively.
In case you’re stitching by machine, use a zipper foot or a binding foot. It will provide help to to maintain the binding straight and even. Start by folding the binding strip in half and aligning the uncooked edges with the uncooked edges of the quilt high. Sew a straight sew alongside the folded fringe of the binding strip, catching the quilt high as you go. While you attain the tip of the binding strip, overlap the ends by about 1 inch and stitch them collectively.
Here’s a desk summarizing the steps for stitching the binding to the quilt high:
| Step | Description |
|---|---|
| 1 | Fold the binding strip in half and align the uncooked edges with the uncooked edges of the quilt high. |
| 2 | Sew a operating sew alongside the folded fringe of the binding strip, catching the quilt high as you go. |
| 3 | While you attain the tip of the binding strip, overlap the ends by about 1 inch and stitch them collectively. |
Mitering the Corners
Mitering the corners is a method used to create a neat and professional-looking end when binding a quilt. It entails folding the binding cloth on the corners to kind a 45-degree angle, which prevents any bulk or extra cloth from accumulating on the corners.
Folding the Binding
To fold the binding for mitering the corners, you will want to:
-
Unfold the binding at one nook.
-
Make a 45-degree reduce throughout the unfolded fringe of the binding.
-
Fold the reduce fringe of the binding over the nook of the quilt, aligning the uncooked edges.
-
Press the binding firmly in place.
Ending the Mitered Nook
As soon as the binding is folded on the nook, you will want to complete the mitered nook by:
-
Folding the remaining binding over the mitered nook, overlapping the folded edge.
-
Urgent the binding firmly in place.
-
Stitching the binding in place alongside the sting of the quilt, catching each layers of the binding.
| Step | Description |
|---|---|
| 1 | Unfold binding and reduce 45-degree angle |
| 2 | Fold reduce edge over nook, aligning uncooked edges |
| 3 | Fold remaining binding over mitered nook, overlapping |
| 4 | Press and stitch binding in place |
Stitching the Binding on the Again
As soon as the binding is sewn across the entrance of the quilt, it is time to sew it down on the again. This may be finished by hand or machine.
By Hand
To stitch the binding down by hand, use a small, sharp needle and thread that matches the colour of the binding. Begin by folding the binding over the sting of the quilt, in order that the folded edge is even with the uncooked fringe of the quilt. Use small, even stitches to stitch the binding down. The stitches needs to be about 1/4 inch aside.
By Machine
To stitch the binding down by machine, use a blind hem sew. This sew will create a small, invisible sew that can maintain the binding down securely.
Utilizing a Blind Hem Foot
In case your stitching machine has a blind hem foot, use it to stitch the binding down. The blind hem foot will provide help to to create a neat, even sew.
To make use of a blind hem foot, observe these steps:
| Step | Description |
|---|---|
| 1 | Fold the binding over the sting of the quilt, in order that the folded edge is even with the uncooked fringe of the quilt. |
| 2 | Connect the blind hem foot to your stitching machine. |
| 3 | Set the sew width to the narrowest setting. |
| 4 | Begin stitching on the nook of the quilt. Maintain the binding taut as you sew. |
| 5 | Proceed stitching across the quilt, maintaining the binding taut. |
| 6 | While you attain the place to begin, overlap the uncooked edges of the binding by about 1 inch. |
| 7 | Sew the binding down, overlapping the place to begin by about 1 inch. |
| 8 | Trim any extra binding. |
Ending the Binding
Machine Stitching
Machine stitching is a fast and straightforward method to end the binding. Use a blind hem presser foot to sew a slender, invisible sew alongside the within fringe of the binding. This methodology is very appropriate for flat, skinny bindings.
Hand Stitching
Hand stitching is a extra conventional methodology that offers a fantastic, nearly invisible end. Use a small, sharp needle and an identical thread. Sew across the edges of the binding, taking small, even stitches.
Glue Basting
Glue basting is a time-saving method that entails making use of cloth glue to the again of the binding. The glue will maintain the binding in place whilst you sew it down by machine or hand. This methodology is finest fitted to heavy or cumbersome bindings.
Whipstitching
Whipstitching is an ornamental sew that can be utilized to complete the binding. Use a single strand of embroidery floss or yarn and a darning needle. Sew by means of the binding, catching the quilt high and batting in every sew. This methodology is very appropriate for ornamental bindings.
Steps to Machine Sew Binding
| Step | Directions |
|---|---|
| 1 | Fold the binding over the uncooked fringe of the quilt, mitering the corners. |
| 2 | Connect a blind hem presser foot to your stitching machine. |
| 3 | Set the sew size to 2-3 mm. |
| 4 | Sew across the perimeter of the quilt, following the within fringe of the binding. |
| 5 | Maintain the quilt taut as you sew to stop puckering. |
Hand Stitching the Binding
Hand stitching the binding is a superb possibility if you do not have a stitching machine or for those who favor the standard look of hand-sewn binding. Listed below are the steps:
Supplies you may want:
| Merchandise | Amount |
|---|---|
| Binding cloth | Sufficient to go across the quilt with a 2-inch overlap |
| Needle | A pointy needle with a small eye |
| Thread | Sturdy thread in a colour that matches the binding cloth |
| Thimble | Elective, however useful to guard your fingers |
Step 1: Put together the binding
Fold the binding cloth in half lengthwise, and press it. It will create a crease down the middle of the material.
Step 2: Pin the binding to the quilt
Fold the uncooked fringe of the binding over the uncooked fringe of the quilt by 1 inch. Pin the binding in place, beginning at a nook.
Step 3: Sew the binding
Use a small, even sew to stitch the binding to the quilt. Begin on the nook, and stitch across the complete quilt, overlapping the binding on the corners.
Step 4: Miters the Corners
To create a neat {and professional} end on the corners, you may have to miter the binding. Here is a step-by-step information:
- While you attain a nook, cease stitching 1/2 inch from the sting of the quilt.
- Fold the binding again on itself at a 45-degree angle.
- Trim the surplus cloth to create a diagonal edge.
- Unfold the binding and proceed stitching from the nook.
- Repeat this course of at every nook.
Step 5: End the Binding
As soon as you’ve got sewn across the complete quilt, overlap the binding by 2 inches. Fold the surplus binding to the again of the quilt and tuck it below the primary few stitches.
Step 6: Blind Sew the Binding
To complete the binding, use a blind sew to stitch it all the way down to the quilt. Here is an in depth information:
- Thread your needle with a double strand of thread and knot the ends.
- Begin stitching on the nook of the quilt, on the again of the material.
- Insert the needle into the binding, simply behind the earlier sew.
- Carry the needle up by means of the quilt, about 1/4 inch from the fold.
- Insert the needle again into the binding, simply behind the earlier sew.
- Proceed stitching across the complete quilt, taking small, even stitches.
- While you attain the tip, knot the threads and trim any extra.
Utilizing a Machine to Sew the Binding
7. Machine Stitching
As soon as the binding is pinned across the quilt, it is time to sew it down. Here is how:
- Set your stitching machine to a slender zigzag sew (about 1.5mm broad). Modify the sew size to about 2.5mm.
- Begin stitching on the nook of the quilt, aligning the uncooked fringe of the binding with the folded fringe of the quilt.
- Maintain the binding taut as you sew, making certain it stays folded over and flat.
- Proceed stitching across the perimeter of the quilt, ensuring to safe the threads in the beginning and finish of every seam.
- As you sew, trim any extra binding that extends past the sting of the quilt.
- While you attain the mitered corners, fastidiously sew over them, making certain the binding stays flat and safe.
- To make the stitching extra ornamental, you’ll be able to modify the zigzag sew settings to create distinctive patterns or textures.
| Sew Width | Sew Size |
|---|---|
| 1.5mm | 2.5mm |
Customizing the Binding
Selecting the Binding Material
The binding cloth ought to complement the quilt’s general design and colour scheme. Think about using a coordinating cloth from the quilt or a contrasting colour for a bolder look.
Width and Amount of Binding
The width of the binding will decide the completed measurement of the binding. A typical width is 2.5 inches (6.4 cm), however you’ll be able to modify it to fit your choice. The quantity of binding you may want is determined by the perimeter of the quilt.
| Quilt Measurement | Binding Size |
|---|---|
| 40 x 60 inches | 6.3 yards |
| 50 x 70 inches | 7.9 yards |
| 60 x 80 inches | 9.5 yards |
Kinds of Binding
There are a number of various kinds of binding, together with:
- Single Fold Binding: The only kind of binding, the place the material is folded as soon as over the sting of the quilt.
- Double Fold Binding: The material is folded twice over the sting of the quilt, making a thicker and extra sturdy binding.
- Bias Binding: Minimize on the diagonal of the material, bias binding gives a stretchy and versatile binding that’s excellent for curved edges.
- Flange Binding: An ornamental binding that encompasses a folded edge that extends past the quilt’s floor.
Ornamental Touches
So as to add a private contact to your binding, take into account incorporating ornamental components comparable to:
- Appliqué: Attaching small items of cloth or elaborations to the binding.
- Embroidery: Stitching ornamental designs onto the binding.
- Quilting: Machine or hand-quilting the binding to create a singular texture.
Troubleshooting Binding Points
Uneven or wavy binding
Trigger: Mismatched seam allowances or inaccurate reducing can result in uneven or wavy binding. Additionally, if the material was not stretched evenly when it was sewn, it might probably trigger the binding to be wavy.
Resolution: Be sure that the seam allowances are equal on each side of the binding strip and that the material is reduce precisely. When stitching the binding, take care to stretch the material evenly in order that it lays flat.
Cumbersome or puckered corners
Trigger: An excessive amount of cloth on the corners can create bulkiness or puckering. Moreover, not mitering or trimming the corners correctly may also result in these points.
Resolution: Miter the corners to cut back bulk and guarantee a easy transition. Trim any extra cloth on the corners to stop puckering. It’s advisable to observe on scrap cloth earlier than making an attempt to bind a quilt.
Binding not laying flat or uneven
Trigger: Binding that’s too free or too tight can stop it from laying flat or evenly. Overlapping the binding strips an excessive amount of or not sufficient may also contribute to this concern.
Resolution: Modify the stress of the stitching machine in order that the binding is securely hooked up however not too tight. Be sure that the binding strips are overlapped by a constant width (sometimes 1/2 inch to three/4 inch). Use a binding clip or pin to carry the binding in place as you sew.
Finalizing the Quilt
Attaching the Binding
As soon as the binding strips have been sewn collectively right into a steady strip and folded in half, it is time to connect it to the quilt. Begin by pinning the binding to the sting of the quilt, with the folded edge aligned with the uncooked fringe of the quilt. Use small, sharp pins and pin perpendicular to the sting of the quilt.
Mitering the Corners
While you attain a nook, you may have to miter the binding to create a neat and safe nook. To miter a nook, fold the binding at a 45-degree angle on the nook, then trim off the surplus. Align the folded fringe of the binding with the uncooked fringe of the quilt and proceed pinning.
Becoming a member of the Binding Ends
As soon as you’ve got hooked up the binding all the way in which across the quilt, you may want to hitch the ends. Overlap the ends of the binding by about 1 inch, then fold the overlap in half and trim off the surplus. Align the folded edges of the binding and pin them collectively.
Prime-Stitching the Binding
The ultimate step is to top-stitch the binding to safe it to the quilt. Use a small sew size and sew near the folded fringe of the binding. You may both sew by hand or by machine. In case you’re stitching by machine, use a strolling foot to assist feed the quilt evenly by means of the machine.
Strategies for Becoming a member of the Binding Ends
There are a number of completely different strategies for becoming a member of the ends of the binding. Listed below are just a few widespread strategies:
| Technique | Description |
|---|---|
| Overlap | Overlap the ends of the binding by about 1 inch, then fold the overlap in half and trim off the surplus. |
| Mitred | Fold the ends of the binding at a 45-degree angle, then trim off the surplus. Align the folded edges of the binding and stitch them collectively. |
| Bias Strip | Minimize a bias strip of cloth that’s the similar width because the binding. Fold the ends of the binding over the bias strip and stitch them collectively. |
How To Sew Binding On Quilt
Stitching binding on a quilt is an effective way to complete the perimeters and provides it a refined look. It is also a comparatively simple course of that may be finished by hand or machine. Listed below are the steps on find out how to sew binding on a quilt:
- Minimize the binding strips. The binding strips needs to be 2 1/2 inches broad and reduce to the size of the quilt’s edges. You have to sufficient strips to go across the complete perimeter of the quilt, plus just a few further inches for overlap.
- Be a part of the binding strips. Sew the binding strips collectively end-to-end utilizing a 1/4-inch seam allowance. Press the seam allowances open.
- Connect the binding to the quilt. Pin the binding to the quilt, proper sides collectively, and align the uncooked edges. Use a 1/4-inch seam allowance to stitch the binding to the quilt. Press the seam allowances open.
- Fold the binding over the quilt edge. Fold the binding over the quilt edge and press it down. Fold the binding over once more and press it down once more. Use a blind sew or a topstitch to stitch the binding all the way down to the quilt.
- Trim the surplus binding. Trim the surplus binding near the quilt edge.
Individuals Additionally Ask About How To Sew Binding On Quilt
How do you sew binding on a quilt by hand?
There are a number of elements that may have an effect on how lengthy it takes to stitch quilt binding on by hand.
– The dimensions of the quilt: A bigger quilt will take longer to bind than a smaller quilt.
– The kind of binding: Some kinds of binding, comparable to bias binding, are tougher to stitch on than others. The kind of cloth used for the binding may also have an effect on how lengthy it takes to stitch on.
– The talent stage of the individual stitching the binding: Somebody who’s extra skilled will be capable of sew the binding on extra rapidly than somebody who’s new to quilting.
–The tactic used to stitch the binding on: There are a number of completely different strategies that can be utilized to stitch binding on a quilt by hand. Some strategies are quicker than others.
Are you able to machine sew quilt binding?
Sure, you’ll be able to machine sew quilt binding. It’s the commonest method to sew binding on a quilt as a result of it’s a lot quicker than hand stitching. There are just a few other ways to machine sew quilt binding, however the commonest methodology is to make use of a 1/4-inch seam allowance and stitch the binding to the quilt high first. Then, fold the binding over the quilt edge and stitch it down once more, utilizing a blind sew or a topstitch.
How do you end the corners when stitching binding on a quilt?
When stitching binding on a quilt, there are two principal methods to complete the corners:
– Mitered corners: Mitered corners are created by folding the binding over at a 45-degree angle on the corners. This offers the quilt a extra skilled end.
– Bias binding: Bias binding is reduce on the bias, which signifies that it’s reduce at a 45-degree angle to the grain of the material. This offers the binding a stretchy high quality, which makes it simpler to stitch round curves and corners.
