## Substitute Antenna 2013 Dodge Dart
In case your 2013 Dodge Dart’s antenna is damaged or broken, you possibly can substitute it your self with a couple of easy instruments. The method is comparatively easy and may be accomplished in about half-hour. Earlier than you start, you may want to collect a couple of provides, together with a brand new antenna, a Phillips head screwdriver, and a pair of needle-nose pliers.
Step one is to take away the previous antenna. To do that, use the Phillips head screwdriver to take away the 2 screws that maintain the antenna base in place. As soon as the screws are eliminated, you possibly can pull the antenna base straight as much as take away it from the automotive.
Subsequent, you may want to put in the brand new antenna. To do that, merely insert the brand new antenna into the opening within the roof of the automotive and tighten the 2 screws till they’re cosy. Watch out to not overtighten the screws, as this might injury the antenna or the roof of the automotive.
Getting ready for Antenna Alternative
Earlier than embarking on the duty of changing your antenna, it is essential to make sure you have all the required instruments and put together your automobile adequately:
Collect Mandatory Instruments
-
New antenna meeting or mast
-
Socket wrench set
-
Phillips head screwdriver
-
Electrical tape
-
Antenna sealant (non-compulsory)
Put together Your Car
-
**Park your automobile in a well-lit and spacious space.** This can give you ample room to work safely and effectively.
-
**Disconnect the damaging battery terminal.** This precaution will forestall any electrical shorts or accidents whereas engaged on {the electrical} system.
-
**Take away the roof molding or trim panel.** This may increasingly require utilizing a plastic pry device to softly pry the panel unfastened. Be cautious to not injury the paint or end.
-
**Find the antenna base.** It’s usually located on the roof of the automobile and secured by bolts or a mounting bracket.
-
**Put together the antenna base for elimination.** Clear the realm across the base to take away any filth or particles. Apply a small quantity of penetrating oil or lubricant to the bolts or mounting screws to facilitate elimination.
Putting in the New Antenna
With the antenna base disconnected from the passenger compartment, you are actually prepared to put in the brand new antenna.
1. Apply a small quantity of dielectric grease to the bottom of the brand new antenna.
2. Insert the brand new antenna into the bottom and tighten it till it’s cosy.
3. Join the antenna wire to the antenna base.
4. **Route the antenna wire by means of the trunk and into the passenger compartment.**
To route the antenna wire by means of the trunk and into the passenger compartment, observe these steps:
- Find the grommet the place the antenna wire passes by means of the firewall into the passenger compartment.
- Take away the grommet from the firewall.
- Feed the antenna wire by means of the grommet and into the passenger compartment.
- Reinstall the grommet within the firewall.
- Join the antenna wire to the radio.
5. Check the brand new antenna to ensure it’s working correctly.
| Instrument | Use |
|---|---|
| Phillips head screwdriver | To take away the antenna base |
| Dielectric grease | To lubricate the antenna base |
| Electrical tape | To safe the antenna wire |
Connecting the Antenna Wire
To attach the antenna wire, observe these steps:
1. Find the Antenna Wire
The antenna wire is often a skinny, black wire that runs from the bottom of the antenna to the again of the radio.
2. Disconnect the Antenna Wire
Use a pair of pliers to softly pull the antenna wire connector off the again of the radio. If the connector is caught, you should utilize a small screwdriver to pry it off.
3. Put together the Antenna Wire
If the antenna wire is broken, you have to to chop off the broken portion and strip the insulation from the ends of the wire.
4. Join the Antenna Wire
Insert the stripped ends of the antenna wire into the connector on the again of the radio. Make it possible for the wires are securely mounted.
5. Check the Antenna Wire
Activate the radio and verify in case you are receiving a sign. In case you are not receiving a sign, verify the connections and be sure that the antenna wire shouldn’t be broken.
6. Troubleshooting Antenna Wire Issues
In case you are having bother connecting the antenna wire, listed here are some troubleshooting suggestions:
| Downside | Answer |
|---|---|
| The antenna wire is broken. | Lower off the broken portion of the wire and strip the insulation from the ends of the wire. |
| The antenna wire shouldn’t be related securely. | Make it possible for the wires are securely mounted within the connector on the again of the radio. |
| The radio shouldn’t be turned on. | Activate the radio and verify in case you are receiving a sign. |
| The antenna shouldn’t be working correctly. | Substitute the antenna. |
Testing the New Antenna
Step 1: Begin the Engine
As soon as you have changed the antenna, activate the automobile to activate the radio. Make sure the antenna is totally prolonged.
Step 2: Tune to a Station
Choose a radio station with a powerful sign and hear for clear reception. If the sound high quality is poor or there’s static, the antenna will not be functioning accurately.
Step 3: Modify the Antenna Place
If the sign is weak, gently regulate the place of the antenna. Strive rotating it barely or transferring it up and down to search out the optimum reception.
Step 4: Drive Round
Take the automobile for a brief drive to check the antenna’s efficiency in numerous areas. Observe if the sign energy stays constant or fluctuates.
Step 5: Park Underneath Obstacles
Park the automobile beneath bushes, overpasses, or in parking garages to create obstacles that will intrude with the antenna’s sign. Monitor the radio reception to see if it stays secure.
Step 6: Evaluate with Outdated Antenna
If potential, evaluate the sign energy and reception high quality of the brand new antenna with the previous one. This will help you identify if the alternative has resolved the problem.
Step 7: Troubleshooting Further Points
If the brand new antenna nonetheless fails to supply clear reception, take into account the next potential causes:
- Free or defective wiring connections
- Broken or worn-out antenna cable
- Antenna mounting base not correctly secured
- Issues with the automobile’s radio or antenna amplifier
- Exterior interference from different digital units or climate situations
These points might require additional troubleshooting or skilled restore.
Changing Broken Wiring (if vital)
If the antenna wiring is broken, it is going to have to be changed. To do that:
- Disconnect the damaging battery terminal.
- Find the antenna wire. It’s often situated behind the radio.
- Lower the broken part of the wire.
- Strip the ends of the wires.
- Join the wires utilizing a wire connector.
- Reconnect the battery terminal.
Steps for Eradicating the Antenna Mast:
1. Find the antenna mast. It’s often situated on the roof of the automotive.
2. Grip the antenna mast and unscrew it counterclockwise. Take away the antenna mast fully from the automobile.
3. Examine the antenna mast for any injury akin to bends, breaks, or corrosion. If there are indicators of harm, substitute the antenna mast.
4. Set up a brand new antenna mast by screwing it into the bottom clockwise.
5. Tighten the antenna mast utilizing a wrench or pliers. Don’t overtighten the antenna mast.
6. Check the antenna mast to make sure that it’s working accurately.
| Instruments Wanted |
|---|
| – Socket wrench or wrench – Screwdriver – Pliers (Optionally available) – New antenna mast |
Eradicating the Outdated Antenna
1. Find the antenna base on the roof of your automobile.
2. Use a wrench or socket to loosen the nut that secures the antenna base.
3. Fastidiously pull the antenna base straight as much as detach it from the roof.
4. Disconnect the antenna wire from the antenna base.
Putting in the New Antenna
5. Join the brand new antenna wire to the antenna base.
6. Slide the brand new antenna base over the antenna wire and into the opening within the roof.
7. Tighten the nut to safe the antenna base.
8. Lengthen the brand new antenna to its full size.
Searching for Skilled Help When Wanted
Whereas changing an antenna is mostly an easy activity, there are some cases the place it is advisable to hunt skilled help. This is a desk outlining conditions when skilled assist could also be warranted:
| State of affairs | Why Skilled Assistance is Wanted |
|---|---|
| Electrical points | Issues with the antenna wiring or electrical system require specialised information to diagnose and restore. |
| Troublesome entry | Antennas mounted in hard-to-reach areas or requiring particular instruments for elimination might profit from skilled dealing with. |
| Broken antenna base | If the antenna base is broken, it is essential to seek the advice of knowledgeable to make sure correct restore or alternative. |
How To Substitute Antenna 2013 Dodge Dart
Changing the antenna on a 2013 Dodge Dart is a comparatively easy activity that may be accomplished in a couple of minutes. Listed here are the steps you might want to take:
- Park the automotive in a secure location and switch off the engine.
- Find the antenna on the roof of the automotive. It’s often close to the middle of the roof.
- Gently pull the antenna straight as much as take away it from the bottom.
- Insert the brand new antenna into the bottom and tighten it by turning it clockwise.
- Check the antenna by turning on the radio and checking for reception.
Folks Additionally Ask
How a lot does it price to interchange an antenna on a 2013 Dodge Dart?
The price of changing an antenna on a 2013 Dodge Dart will fluctuate relying on the kind of antenna you select and the labor prices in your space. Nonetheless, you possibly can count on to pay between $50 and $200 for the components and labor.
How lengthy does it take to interchange an antenna on a 2013 Dodge Dart?
Changing the antenna on a 2013 Dodge Dart is a comparatively fast and simple activity that may be accomplished in about quarter-hour.
Can I substitute the antenna on my 2013 Dodge Dart myself?
Sure, you possibly can substitute the antenna in your 2013 Dodge Dart your self. The method is comparatively easy and may be accomplished with a couple of primary instruments.
