When the time involves take away the reverse motor in your Harley Trike, it’s important to have an understanding of the process and the required instruments. This activity could seem daunting, however it may be damaged down into manageable steps. With cautious planning and execution, you possibly can efficiently full this restore your self. On this article, we’ll information you thru the method of eradicating the reverse motor in your Harley Trike, offering you with detailed directions and suggestions to make sure a easy and environment friendly restore.
Earlier than embarking on this activity, it’s essential to assemble the required instruments and supplies. You’ll need a set of wrenches, a socket set, a screwdriver, a torque wrench, and some miscellaneous objects like rags and cleaner. Moreover, it’s extremely really useful to seek the advice of your Harley Trike’s service guide for particular directions and security precautions. Upon getting every part you want, you possibly can start the elimination course of.
Step one includes disconnecting the battery and draining the fluids from the reverse motor. It will forestall any electrical hazards or leaks in the course of the elimination course of. Subsequent, take away the reverse motor mount bolts and punctiliously disconnect {the electrical} connectors. You will need to be aware the place of the wires for reassembly afterward. As soon as the motor is free, you possibly can elevate it out of the trike. Remember to help the motor’s weight and keep away from damaging any surrounding elements.
Eradicating Mounting Bolts
When eradicating the mounting bolts, make sure you use a wrench that’s the right measurement for the bolts. Don’t overtighten the bolts, as this could harm the threads. The next desk exhibits the torque specs for the mounting bolts:
| Bolt Measurement | Torque |
|---|---|
| M8 | 25 ft-lbs |
| M10 | 35 ft-lbs |
| M12 | 45 ft-lbs |
To take away the mounting bolts, comply with these steps:
- Find the mounting bolts that safe the reverse motor to the transmission.
- Use a wrench to loosen the bolts.
- As soon as the bolts are free, take away them by hand.
- If the bolts are tough to take away, you could want to make use of a penetrating oil to loosen them.
Changing Gasket and Seal
To interchange the gasket and seal, you will have the next instruments and supplies:
- New gasket and seal
- RTV sealant
- Socket set
- Screwdriver
- Razor blade
- Store towels
Observe these steps to switch the gasket and seal:
1. Clear the mating surfaces of the motor and transmission with a razor blade and store towels.
2. Apply a skinny bead of RTV sealant to the mating floor of the motor.
3. Place the brand new gasket on the motor and align it with the transmission.
4. Bolt the transmission to the motor.
5. Apply a skinny bead of RTV sealant to the mating floor of the transmission.
6. Place the brand new seal on the transmission and align it with the motor.
7. Insert the seal into the transmission and safe it with a circlip or snap ring.
| Step | Description |
|---|---|
| 7 | Insert the seal into the transmission and safe it with a circlip or snap ring. Seek the advice of your service guide for particular directions in your mannequin. Make sure the seal is correctly seated and safe to stop leaks. |
Reinstalling Reverse Motor
Step 1: Put together the Motor
Disconnect the shift and electrical connections from the reverse motor and take away the motor from the trike. Clear the motor and examine it for any harm or put on.
Step 2: Place the Motor
Place the reverse motor within the acceptable location on the trike, guaranteeing that it’s aligned appropriately. Safe the motor utilizing the supplied bolts or brackets.
Step 3: Reconnect the Shift Linkage
Connect the shift linkage to the reverse motor, ensuring that it’s engaged and working easily.
Step 4: Reconnect the Electrical Connections
Join {the electrical} connections to the reverse motor, together with the optimistic and detrimental cables and the shift change.
Step 5: Bleed the System
Fill the reverse motor’s fluid reservoir with the really useful fluid and function the shift lever forwards and backwards a number of occasions to bleed the system and take away any air.
Step 6: Take a look at Operation
Begin the trike and have interaction the reverse gear. Confirm that the motor rotates within the right path and that the trike strikes in reverse easily.
Step 7: Modify the Clutch
If needed, regulate the clutch cable to make sure that the motor engages and disengages easily.
Step 8: Detailed Inspection of the Clutch Mechanism
To make sure optimum efficiency and stop untimely put on, examine the clutch mechanism totally:
1. Examine the clutch plates for put on and harm, changing them if needed.
2. Study the clutch springs for correct stress, guaranteeing they’re sturdy sufficient to interact the clutch successfully.
3. Examine the clutch hub and basket for any harm or deformation, guaranteeing they’re easy and freed from burrs.
4. Modify the clutch cable stress to make sure correct engagement and disengagement of the clutch.
5. Make sure the clutch lever and linkage are functioning easily, offering ample clearance and journey.
Reconnecting Electrical Connections
Now that the reverse motor has been eliminated, it is time to reconnect {the electrical} connections. It is a comparatively easy course of, nevertheless it’s vital to guarantee that the connections are safe and proper. In any other case, you can harm your trike’s electrical system.
Listed here are the steps on the right way to reconnect {the electrical} connections:
- Disconnect the detrimental battery terminal.
- Find the reverse motor relay. It is often situated close to the reverse motor.
- Unplug {the electrical} connector from the relay.
- Take away the 2 bolts that maintain the relay in place.
- Take away the relay from the trike.
- Join {the electrical} connector to the brand new relay.
- Mount the brand new relay in place utilizing the 2 bolts.
- Tighten the bolts securely.
- Reconnect the detrimental battery terminal.
10. Take a look at the reverse motor to verify it is working correctly.
For those who’re not snug working in your trike’s electrical system, it is best to have it achieved by a certified mechanic.
| Reverse Motor Pinout | Shade | Operate |
|---|---|---|
| 1 | Purple | Energy |
| 2 | Black | Floor |
| 3 | Blue | Reverse Enter |
Testing and Verification
As soon as the reverse motor has been eliminated, it is vital to check the system to make sure it is functioning appropriately. Listed here are the steps concerned in testing and verification:
1. Electrical Inspection
Examine all electrical connections to verify they’re safe and freed from corrosion. Examine the wiring harness for any harm or free wires.
2. Brake System Examine
Make sure that the brake system is working correctly by making use of the brakes and checking for any leaks or irregular noises. The brakes ought to interact easily and successfully.
3. Reverse Gear Engagement
With the transmission in impartial, interact the reverse gear by urgent the reverse button. The trike ought to transfer easily in reverse with out hesitation or grinding noises.
4. Ahead Gear Engagement
Shift the transmission into ahead gear and confirm that the trike strikes ahead with none points. Examine for any uncommon vibrations or noises.
5. Reverse Gentle Operate
Affirm that the reverse lights illuminate when the reverse gear is engaged. This means that {the electrical} system is functioning appropriately.
6. Impartial Place
Return the transmission to impartial and guarantee that the trike stays stationary with no unintended motion.
7. Throttle Response
Take a look at the engine’s throttle response whereas in reverse. The trike ought to speed up easily and steadily with none hesitation or stalling.
8. Load Testing
To check the system below load, apply the brakes whereas in reverse gear. The trike ought to be capable of maintain its place with out rolling backward.
9. Prolonged Testing
Journey the trike in varied eventualities to additional consider the efficiency of the brand new system. Search for any indicators of overheating, vibration, or irregular conduct.
10. Troubleshooting
If any points come up throughout testing, seek the advice of the service guide or a certified technician to diagnose and resolve the issue. The next desk gives a troubleshooting information for frequent points:
| Problem | Attainable Trigger |
|---|---|
| Trike doesn’t transfer in reverse | – Defective reverse motor – Electrical connection points – Transmission drawback |
| Reverse gear grinds | – Worn or broken gears – Improper adjustment |
| Reverse lights not working | – Blown fuse – Defective change – Electrical wiring challenge |
How To Take away Reverse Motor On Harley Trike
To take away the reverse motor on a Harley trike, you will have the next instruments:
- Socket wrench
- Wrench
- Flathead screwdriver
- Phillips head screwdriver
- Security glasses
- Gloves
1. Disconnect the detrimental battery terminal.
2. Take away the seat.
3. Take away the battery field.
4. Take away the exhaust pipe.
5. Take away the rear wheel.
6. Unbolt the reverse motor from the transmission.
7. Take away the reverse motor.
Folks Additionally Ask
How a lot does it value to take away a reverse motor on a Harley trike?
The fee to take away a reverse motor on a Harley trike will differ relying on the store you’re taking it to. Nevertheless, you possibly can count on to pay round $200-$400 for the labor.
How lengthy does it take to take away a reverse motor on a Harley trike?
It can sometimes take a mechanic round 2-4 hours to take away a reverse motor on a Harley trike.
Can I take away the reverse motor on a Harley trike myself?
Sure, it’s potential to take away the reverse motor on a Harley trike your self. Nevertheless, it’s endorsed that you simply solely try this in case you are snug engaged on bikes. In case you are unsure the right way to do it, it’s best to take your trike to a mechanic.
