In case your LG Mannequin WT1101CW washer is not draining correctly, you could must take away and clear the drain pump. It’s situated on the backside of the washer, and it’s answerable for pumping the water out of the bathtub. Here’s a step-by-step information on the right way to take away the drain pump in your LG Mannequin WT1101CW washer. Nonetheless, for those who’re not snug doing this your self, name a professional equipment restore technician.
Earlier than you start, you will have to assemble a number of instruments: a Phillips head screwdriver, a flat head screwdriver, and a pair of pliers. Additionally, you will want a bucket to catch the water that may drain from the pump once you take away it. First, unplug the washer from the facility outlet. Subsequent, flip off the water provide to the washer. Then, place the bucket below the drain pump to catch the water that may drain out. Lastly, use the Phillips head screwdriver to take away the screws that maintain the drain pump in place.
After you have eliminated the screws, use the flat head screwdriver to pry the drain pump unfastened from the washer. Watch out to not injury the drain pump or the encompassing parts. As soon as the drain pump is unfastened, use the pliers to disconnect the hoses which can be linked to it. Lastly, elevate the drain pump out of the washer. Now that you’ve got eliminated the drain pump, you possibly can clear it. To do that, use a moist material to wipe away any grime or particles that has gathered on the pump. You may also use a small brush to scrub the within of the pump. As soon as the pump is clear, reassemble it within the reverse order that you simply eliminated it.
Finding the Drain Pump
The drain pump is an important part of your LG Mannequin WT1101CW washer, answerable for expelling water from the bathtub throughout the spin cycle. In case your washer will not be draining correctly, a defective drain pump might be the perpetrator.
Finding the drain pump can range relying on the precise mannequin of your washer. Nonetheless, usually, listed below are the steps to observe:
- Unplug the washer from {the electrical} outlet for security causes.
- Flip off the water provide valves linked to the washer.
- Tilt the washer again barely to entry the underside of the unit.
- Find the drain pump, which is often located on the entrance or backside of the washer. It might be lined by a plastic panel that must be eliminated.
- Disconnect the hoses and wires linked to the drain pump. Make sure you be aware how they’re linked for simple reassembly later.
- Take away the bolts or screws that safe the drain pump to the washer.
- Fastidiously pull the drain pump out of its housing. Examine the pump for any injury or particles that could be inflicting it to malfunction.
Eradicating the Drain Hose
Find the drain hose behind the washer, usually hid behind a small entry panel. Open the panel to reveal the hose.
Disconnect the drain hose from the drain pump by gently pulling it away. A clamp or fastener could safe the hose, so be cautious when detaching it.
Pull the drain hose fully out of the washer, guaranteeing to empty any remaining water into an acceptable container.
Elective Steps for Cussed Hose Elimination
If the drain hose is tightly caught or clogged, think about these further steps:
| Situation | Resolution |
|---|---|
| Cussed clamp | Use pliers to rigorously loosen the clamp with out damaging the hose. |
| Clogged hose | Clear particles by operating a skinny wire or brush via the hose and flushing with water. |
| Broken hose | Substitute the broken part of the hose with a brand new one of many identical dimension and materials. |
Inspecting the Impeller
After you have eliminated the drain pump, it’s essential to examine the impeller for any injury or blockage. The impeller is a crucial part of the drain pump answerable for spinning and draining water away from the washer. If the impeller is broken or blocked, it may well compromise the effectivity of the drain pump and result in additional points.
To totally examine the impeller:
- Fastidiously take away the impeller from the drain pump housing.
- Look at the impeller for any cracks, breaks, or deformities. Even minor injury can have an effect on its performance.
- Verify for any international objects or particles caught within the impeller blades or the housing. These obstructions can block the sleek move of water and hinder the impeller’s rotation.
- Examine the impeller shaft for any indicators of wear and tear or corrosion. Extreme friction or rust can result in issue in spinning and eventual failure.
- If seen injury or blockage is current, the impeller could have to be changed or cleaned totally.
- At all times use real LG elements when changing the impeller to make sure optimum efficiency and security.
Common inspection and upkeep of the impeller are important for guaranteeing the longevity and correct functioning of your LG washer.
Reinstalling the Drain Pump
8. Substitute the Screw
Find the screw that holds the drain pump in place. It’s usually situated on the backside of the pump. Align the screw with the opening within the mounting bracket and tighten it securely utilizing a screwdriver. To make sure a safe match, gently tug on the pump as soon as screwed to substantiate it’s tightly in place.
9. Reconnect the Wiring
Find {the electrical} connector for the drain pump. It’s often a small, plastic connector with two or three wires. Align the connector with the corresponding plug on the drain pump and push it firmly till it clicks into place. Double-check that the connector is safe and the wires usually are not unfastened or uncovered.
10. Reinstall the Kick Panel
Raise the kick panel again into place, aligning it with the underside of the washer cupboard. Push the kick panel firmly into place till it snaps into place. Be sure that the drain pump will not be obstructed by the kick panel and that the panel covers the pump fully.
Take away Drain Pump on LG Mannequin WT1101CW
Instruments you may want:
- Phillips head screwdriver
- Flat head screwdriver
- Bucket or bowl
Directions:
- Unplug the washer from {the electrical} outlet.
- Flip off the water provide to the washer.
- Open the washer door and take away the garments.
- Find the drain pump on the backside of the washer. It’s often situated on the proper aspect.
- Disconnect the hoses from the drain pump.
- Take away the screws that maintain the drain pump in place.
- Pull the drain pump out of the washer.
- Clear the drain pump and change it if essential.
- Reassemble the washer within the reverse order.
Folks Additionally Ask
How do I do know if my LG Washer Drain Pump is dangerous?
There are a number of indicators that your LG washer drain pump could also be dangerous:
- Your washer will not be draining correctly.
- Your washer is making a loud noise when it’s draining.
- Your washer is leaking water from the underside.
Can I change the drain pump on my LG Washer myself?
Sure, you possibly can change the drain pump in your LG washer your self. Nonetheless, it is very important be aware that this can be a troublesome restore and will solely be tried by somebody with expertise in equipment restore.
