Changing a heating ingredient in a Samsung dryer can prevent the price of shopping for a brand new dryer or hiring an equipment restore technician. To switch the heating ingredient, you may first want to collect the required instruments and supplies, together with a brand new heating ingredient, screwdriver, and pliers. After you have the required gadgets, comply with these steps to exchange the heating ingredient in your Samsung dryer.
First, unplug the dryer from the facility outlet and take away the again panel of the dryer. Subsequent, find the heating ingredient and disconnect the wires which can be connected to it. Then, take away the previous heating ingredient from the dryer. To put in the brand new heating ingredient, merely insert it into the dryer and reconnect the wires. Lastly, substitute the again panel of the dryer and plug it again into the facility outlet. Your Samsung dryer ought to now be working correctly.
If you’re not assured in your capacity to exchange the heating ingredient your self, it’s best to contact a professional equipment restore technician. A professional technician will be capable to rapidly and safely substitute the heating ingredient in your Samsung dryer and get it working correctly once more.
Security Precautions
Earlier than embarking on the duty of changing the heating ingredient in your Samsung dryer, it’s crucial to prioritize your security. Electrical energy and heating parts can pose vital dangers if correct precautions aren’t taken. To make sure a secure and profitable restore, meticulously adhere to the next security measures:
1. Disconnect the Energy Supply
The primary and most important step is to disconnect {the electrical} provide to your dryer. That is a necessary security measure to forestall any unintentional electrical shocks or fires. Find the principle electrical panel in your house and change off the circuit breaker or take away the fuse comparable to the dryer. Confirm that the facility has certainly been disconnected by testing the dryer outlet with a voltage tester. Wait a couple of minutes to permit any residual electrical energy within the system to dissipate.
| Suggestions for Disconnecting the Energy Supply |
|---|
| – Determine the proper circuit breaker or fuse for the dryer. |
| – Swap off the corresponding circuit breaker or take away the fuse. |
| – Use a voltage tester to substantiate that the outlet is now not receiving energy. |
| – Permit ample time for the residual electrical energy to dissipate. |
Collect Needed Instruments and Supplies
Earlier than embarking on the restore, it is essential to collect the important instruments and supplies. This is an in depth rundown of what you may want:
Supplies:
- New heating ingredient
- Electrical tape
- Warmth-resistant gloves (elective)
Instruments:
| Device | Objective |
|---|---|
| Phillips-head screwdriver | Take away the screws securing the entry panels and heating ingredient |
| Torx screwdriver | Unscrew the bolts holding the heating ingredient in place (some fashions) |
| Multimeter | Take a look at the continuity of the heating ingredient (elective) |
| Pliers (elective) | Tighten or loosen nuts or bolts |
| Protecting goggles (elective) | Defend eyes from free particles |
Further Supplies:
Whereas not strictly obligatory, sure supplies could make the restore course of smoother:
- Flashlight: Illuminate the work space, particularly in dimly lit areas
- Store towels or rags: Clear up any particles or spills
- Digicam: Doc the disassembly course of for simpler reassembly
- Warmth gun (elective): Soften previous adhesive or pace up evaporation of moisture
- Soldering iron (elective): Restore broken wires or safe new connections
Find and Take away the Rear Panel
Unplug the dryer and transfer it away from the wall.
For security functions, unplug your dryer from the facility outlet earlier than beginning any repairs. It could even be greatest to tug the dryer away from the wall to provide your self ample area to work.
Find the screws holding the rear panel in place.
Figuring out the screws that maintain the rear panel of the dryer is essential. These screws are usually situated across the perimeter of the panel, and their place might differ barely relying on the dryer mannequin. After you have recognized the screws, proceed to the subsequent step.
Take away the screws and thoroughly elevate off the rear panel.
After you have situated the screws, use a screwdriver to take away them. Watch out to not strip the screws or harm the rear panel when eradicating them. After eradicating all of the screws, rigorously elevate the rear panel off the dryer. Be aware that the rear panel could also be barely heavy, so make sure you help it with one hand whereas eradicating the screws with the opposite.
Disconnect Present Heating Aspect
**Step 1: Unplug the Dryer**
Earlier than engaged on the dryer, disconnect it from the facility provide by unplugging it from the wall outlet.
**Step 2: Take away the Again Panel**
Find the screws on the again panel of the dryer and take away them utilizing a screwdriver. Rigorously elevate and take away the again panel to show the interior elements.
**Step 3: Disconnect Wires**
Determine the 2 wires related to the heating ingredient terminals. Gently pull the wire connectors off the terminals. Make observe of which wire goes to which terminal for future reference.
**Step 4: Take away the Heating Aspect**
The heating ingredient is held in place by two screws or bolts. Use a wrench or socket to loosen and take away these fasteners. Rigorously slide the heating ingredient out of its housing. Be aware of sharp edges and keep away from touching the ingredient together with your naked arms.
| Screw/Bolt Location | Elimination Methodology |
|---|---|
| High of the housing | Loosen with a wrench or socket |
| Backside of the housing | Take away with a wrench or socket |
**Step 5: Examine the Heating Aspect**
Visually examine the heating ingredient for any harm or corrosion. If the ingredient is broken, it’ll have to be changed earlier than reassembling the dryer.
Take away Outdated Heating Aspect
5. Disconnect the heating ingredient from the facility provide.
| Kind of Dryer | Steps |
|---|---|
| Fuel Dryer |
Shut off the fuel provide to the dryer earlier than continuing. |
| Electrical Dryer |
Unplug the dryer from the facility outlet and switch off the circuit breaker or fuse for the dryer circuit |
6. Take away the screws that maintain the heating ingredient in place.
7. Unclip the wire terminals from the heating ingredient.
8. Pull the heating ingredient out of the dryer.
Set up New Heating Aspect
Security Precautions
Earlier than starting any work, unplug your dryer and disconnect the facility supply. Be sure that the machine is cool to the contact.
Eradicating the Outdated Heating Aspect
- Take away the entrance panel of the dryer by unscrewing the screws on the high and pulling it ahead.
- Find the entry panel on the entrance of the dryer’s drum. Take away the screws and pull it open.
- Pull the previous heating ingredient unit in the direction of you to disconnect the wires.
- Unplug the wires from {the electrical} terminals and take away the previous heating ingredient.
Putting in the New Heating Aspect
- Insert the brand new heating ingredient unit into the opening within the drum.
- Join the wires to {the electrical} terminals. Be sure that the connections are safe.
- Push the heating ingredient unit again into place and safe it with the screws.
- Reattach the entry panel and the entrance panel of the dryer.
- Plug the dryer again into the facility outlet and switch it on to check the brand new heating ingredient.
Suggestions for Troubleshooting
| Drawback | Resolution |
|---|---|
| Dryer not heating | Examine the facility provide. Examine the wires and connections to the heating ingredient. Take a look at the heating ingredient with a multimeter. |
| Dryer overheating | Unplug the dryer and let it quiet down. Clear the lint filter and exhaust vent. Examine the thermostat and temperature sensor. |
Reconnect Electrical Wires
Now it is time to reconnect {the electrical} wires to the heating ingredient. Make sure you match the wires to the proper terminals on the ingredient. Sometimes, the crimson wire will hook up with the left terminal and the white wire will hook up with the fitting terminal. Nonetheless, confer with your dryer’s particular wiring diagram to substantiate.
Tighten the screws on the terminals securely utilizing a screwdriver. Be sure that the wires are making good contact with the terminals to forestall any free connections that would trigger arcing or different electrical points.
As soon as the wires are related, tuck them again into the insulation across the heating ingredient. It will assist to guard the wires from warmth harm and hold the within of the dryer tidy.
Wiring Diagram
For fast reference, here’s a desk with a normal wiring diagram for many Samsung dryers:
| Wire Coloration | Terminal |
|---|---|
| Pink | Left Terminal |
| White | Proper Terminal |
Once more, double-check your dryer’s particular wiring diagram to make sure accuracy earlier than making any connections.
Exchange Rear Panel
Now that the screws are eliminated, elevate the rear panel up from the underside and pull it in the direction of you to detach it from the dryer. Watch out to not harm any wires or elements as you do that.
As soon as the rear panel is eliminated, you’ll have entry to the heating ingredient. The heating ingredient is situated on the backside of the dryer, behind the drum. It’s held in place by two screws.
Step 8: Take away the Heating Aspect’s Wiring
Earlier than eradicating the heating ingredient, it’s essential disconnect its wiring. The heating ingredient has two wires related to it: a black wire and a white wire. Use a pair of pliers to softly pull the wires off of the heating ingredient’s terminals.
As soon as the wires are disconnected, you possibly can take away the heating ingredient. Use a screwdriver to take away the 2 screws that maintain the heating ingredient in place. As soon as the screws are eliminated, the heating ingredient might be pulled out of the dryer.
| Step 6: Find the Heating Aspect | The heating ingredient is situated on the backside of the dryer, behind the drum. It’s held in place by two screws. |
| Step 7: Disconnect the Heating Aspect’s Wiring | Earlier than eradicating the heating ingredient, it’s essential disconnect its wiring. The heating ingredient has two wires related to it: a black wire and a white wire. Use a pair of pliers to softly pull the wires off of the heating ingredient’s terminals. |
| Step 8: Take away the Heating Aspect | As soon as the wires are disconnected, you possibly can take away the heating ingredient. Use a screwdriver to take away the 2 screws that maintain the heating ingredient in place. As soon as the screws are eliminated, the heating ingredient might be pulled out of the dryer. |
As soon as the previous heating ingredient is eliminated, you possibly can substitute it with the brand new one. Insert the brand new heating ingredient into the dryer and safe it with the 2 screws. Make sure you join the wires to the heating ingredient’s terminals within the appropriate order: black wire to black terminal, white wire to white terminal.
As soon as the brand new heating ingredient is put in, you possibly can reattach the rear panel to the dryer. Safe the rear panel with the screws that you simply eliminated earlier.
Take a look at the Dryer
After you have changed the heating ingredient, you will need to take a look at the dryer to verify it’s working correctly. Listed below are the steps on the way to take a look at the dryer:
| Step | Motion |
|---|---|
| 1 | Ensure that the dryer is plugged into an outlet and that the facility change is turned on. |
| 2 | Open the dryer door and place a moist towel inside. |
| 3 | Shut the dryer door and choose the “Regular” or “Timed Dry” cycle. |
| 4 | Press the “Begin” button to begin the dryer. |
| 5 | Let the dryer run for a couple of minutes to see if the towel will get heat. |
| 6 | If the towel will get heat, then the heating ingredient is working correctly. |
| 7 | If the towel doesn’t get heat, then there could also be an issue with the heating ingredient or different elements of the dryer. |
If you’re having issues together with your dryer, it’s best to contact a professional equipment restore technician for help.
Security Precautions Earlier than Beginning:
1. Unplug the dryer from the facility outlet and permit it to chill fully.
2. Put on gloves to guard your arms from sharp edges.
3. Collect all obligatory instruments and components earlier than beginning.
Checking the Heating Aspect:
1. Take away the again panel of the dryer by unscrewing the screws across the perimeter.
2. Find the heating ingredient, which is often an oblong steel field with two wires related to it.
3. Unplug the wires from the heating ingredient utilizing needle-nose pliers.
Eradicating the Heating Aspect:
1. Unscrew the nuts holding the heating ingredient in place.
2. Rigorously elevate the heating ingredient out of the dryer cupboard.
Putting in the New Heating Aspect:
1. Place the brand new heating ingredient into the dryer cupboard.
2. Tighten the nuts holding the heating ingredient in place.
3. Join the wires to the heating ingredient.
Troubleshooting Suggestions
1. If the dryer nonetheless doesn’t warmth, test the thermal fuse.
2. If the thermal fuse is blown, substitute it.
3. If the heating ingredient just isn’t getting energy, test the wiring.
4. If the wiring is broken, restore or substitute it.
5. If the dryer remains to be not heating, contact a professional equipment restore technician.
Further Troubleshooting Suggestions:
| Attainable Trigger | Resolution |
|---|---|
| Unfastened belt | Regulate or substitute the belt |
| Vent blockage | Clear the dryer vent |
| Defective thermostat | Exchange the thermostat |
| Defective relay | Exchange the relay |
| Defective management board | Exchange the management board |
7. If the dryer is making a loud noise, test the drum bearings.
8. If the drum bearings are worn, substitute them.
9. If the dryer is shaking excessively, test the shock absorbers.
10. If the shock absorbers are worn, substitute them.
The best way to Set up a Heating Aspect in a Samsung Dryer
Changing the heating ingredient in a Samsung dryer is a comparatively easy job that may be accomplished in about an hour. Nonetheless, you will need to take security precautions and comply with the directions rigorously to keep away from damage or harm to the dryer.
Supplies wanted:
- New heating ingredient
- Screwdriver
- Wrench
- Security glasses
- Gloves
Directions:
- Unplug the dryer from the facility outlet.
- Placed on security glasses and gloves.
- Take away the again panel of the dryer by unscrewing the screws that maintain it in place.
- Find the heating ingredient, which is often situated on the backside of the dryer.
- Disconnect the wires from the heating ingredient.
- Unscrew the bolts that maintain the heating ingredient in place.
- Raise the heating ingredient out of the dryer.
- Place the brand new heating ingredient into the dryer.
- Screw within the bolts to safe the heating ingredient in place.
- Join the wires to the heating ingredient.
- Exchange the again panel of the dryer.
- Plug the dryer again into the facility outlet.
