10-Step Guide to Installing a Ring Video Doorbell

Embark on a transformative journey to boost your private home safety with the Ring Video Doorbell. This progressive system empowers you to observe your property remotely, keeping track of guests, deliveries, and potential threats. Its smooth design and intuitive options seamlessly combine into your current house infrastructure, offering you with peace of thoughts wherever you might be.

Putting in the Ring Video Doorbell is a simple course of that may be effortlessly completed by following our complete information. Whether or not you are a seasoned DIY fanatic or a first-time home-owner, our step-by-step directions empower you to finish the duty with confidence. Put together to raise your private home’s security and comfort with the Ring Video Doorbell.

At the start, collect the mandatory instruments for the set up. You’ll require a screwdriver, a drill, a degree, and maybe a doorbell chime (non-obligatory). Earlier than commencing the set up, determine on the best placement on your Ring Video Doorbell. Choose a location with a transparent view of the doorway, guaranteeing unobstructed entry to your door. This strategic positioning will optimize the system’s performance and maximize its advantages.

Selecting the Proper Ring Video Doorbell

Step one in putting in a Ring Video Doorbell is choosing the proper mannequin on your house. Ring provides a spread of doorbells with various options and capabilities. Listed below are some key components to think about when making your alternative:

Kind of Energy Supply:

Battery-powered: These doorbells run on rechargeable batteries, which generally final for a number of months on a single cost. They are perfect for properties the place there isn’t any current doorbell wiring or for conditions the place you need to keep away from working wires.
Wired: Wired doorbells are linked to your private home’s electrical system and supply steady energy. They provide extra secure efficiency and longer battery life, however they require extra advanced set up.

Video High quality:

Decision: The decision of your doorbell’s digital camera determines the readability and sharpness of the photographs and movies it data. Greater-resolution doorbells present extra detailed footage.
Subject of View: The sphere of view signifies the realm that the doorbell’s digital camera can cowl. A wider discipline of view means that you can see extra of the doorstep and surrounding space.

Movement Detection:

Customizable Movement Zones: Some doorbells permit you to outline particular areas in your discipline of view the place movement detection can be triggered. This might help cut back false alerts and concentrate on crucial areas.
Movement Alerts: Doorbells ship push notifications to your smartphone or pill when movement is detected. Some fashions provide customizable alert settings, permitting you to regulate the sensitivity or schedule when alerts are despatched.

Different Options:

Two-Method Audio: This function lets you talk with guests at the doorstep via the doorbell’s built-in speaker and microphone.
Night time Imaginative and prescient: Night time imaginative and prescient permits your doorbell to document clear pictures and movies even in low-light situations.
App Integration: All Ring doorbells combine seamlessly with the Ring app, the place you may view dwell video, reply to alerts, and handle your system settings.

Getting ready Your House for Set up

1. Select the Proper Set up Location

The best location on your Ring Video Doorbell is a well-lit space with a transparent view of your entryway. Keep away from mounting it in areas with direct daylight or extreme warmth, as this could intervene with the system’s efficiency. Moreover, be sure that the situation has a robust Wi-Fi sign for dependable connectivity.

2. Put together the Wiring and Energy Supply

Your Ring Video Doorbell requires an influence supply to function. There are two foremost choices for powering the system:

Hardwire: Connecting the system on to your private home’s electrical wiring. This feature offers essentially the most secure and dependable energy provide and is advisable if doable.
Battery-powered: Utilizing a chargeable battery that powers the system. This feature is extra handy and moveable, however requires common charging and will not present the identical battery life in colder temperatures.

If you happen to select to hardwire the system, you will have to run a wire out of your doorbell chime to the set up location. The wire ought to be 16-24 AWG and lengthy sufficient to achieve the doorbell transformer and the system itself. Alternatively, should you go for battery energy, you may cost the battery utilizing the included charging cable and insert it into the system.

3. Collect Essential Instruments and Supplies

Earlier than beginning the set up, collect all the mandatory instruments and supplies:

Device/Materials	Goal
Screwdriver (Phillips and flathead)	Tightening screws
Drill (non-obligatory)	Drilling holes for hardwire set up
Wire strippers	Exposing wire for hardwire set up
Stage	Guaranteeing the doorbell is put in straight
Mounting bracket	Mounting the doorbell to the wall
Screws	Securing the mounting bracket

Mounting the Baseplate and Doorbell Unit

1. Mount the Baseplate

Place the baseplate over the specified location and mark the screw holes. Drill pilot holes if mandatory. Safe the baseplate utilizing the supplied screws.

2. Stage the Baseplate

Use a degree to make sure the baseplate is degree. If not, regulate the screws accordingly.

3. Join the Wires to the Doorbell Unit

The doorbell unit has 4 terminals: Entrance, Trans, Rear, and GND. Join the wires out of your current doorbell transformer as follows:

Ring Doorbell Terminal	Present Doorbell Wire
Entrance	Entrance door button wire
Trans	Transformer wire linked to entrance door button wire
Rear	Transformer wire linked to rear door button wire (if relevant)
GND	Floor wire

Notice: If you happen to should not have an current doorbell transformer, you will have to put in one earlier than continuing.

Safe the wires by tightening the terminal screws. Tuck any extra wire into the baseplate cavity.

Connecting the Wires and Energy Provide

Figuring out the Wires

Earlier than connecting the wires, it is essential to determine them appropriately. The Ring Video Doorbell sometimes comes with two wires: a doorbell wire and a floor wire. The doorbell wire is often thicker and carries the voltage wanted to energy the system, whereas the bottom wire offers a protected path for any extra electrical energy.

Putting in the Doorbell Wire

Find the prevailing doorbell wires: Take away the duvet of your outdated doorbell and find the 2 wires linked to it.
Disconnect the prevailing doorbell: Unscrew the terminals to disconnect the wires from the outdated doorbell.
Join the Ring doorbell wire: Join the thicker wire to the "Entrance" terminal on the Ring Video Doorbell and the thinner wire to the "Rear" terminal. Safe the wires tightly.

Putting in the Floor Wire

Test if a floor wire exists: In case your current doorbell or wiring doesn’t have a floor wire, seek advice from the "Troubleshooting" part within the Ring Video Doorbell person guide.
Join the bottom wire: If a floor wire is offered, join it to the inexperienced screw terminal on the Ring Video Doorbell.

Powering the Ring Video Doorbell

Determine the facility supply: The Ring Video Doorbell could be powered via your current doorbell transformer or an non-obligatory plug-in adapter.
Connecting to a doorbell transformer: Use the supplied wire nuts to attach the doorbell wires to the terminals on the doorbell transformer. Usually, the thicker wire connects to the "Terminal 1" and the thinner wire to "Terminal 2".
Connecting to a plug-in adapter: If you do not have an current doorbell transformer, use the supplied plug-in adapter. Join the doorbell wires to the terminals on the adapter and plug the adapter into a close-by outlet.

Energy Supply	Connection
Doorbell Transformer	Wire nuts to transformer terminals
Plug-in Adapter	Wires to adapter terminals, adapter plugged into outlet

Syncing the Doorbell with Your Telephone

As soon as you have put in your Ring Video Doorbell, the subsequent step is to attach it to your smartphone. This is a step-by-step information that will help you via the method:

1. Open the Ring app

If you have not already, obtain and set up the Ring app from the App Retailer (iOS) or Google Play Retailer (Android).

2. Create an account

If you happen to’re a first-time person, you may must create an account by offering your e mail handle and making a password.

3. Join your system

Faucet the “Set Up a Machine” button within the app and choose your Ring Video Doorbell mannequin. Comply with the on-screen directions to attach your doorbell to your Wi-Fi community.

4. Check your doorbell

As soon as your doorbell is linked, you may take a look at it by urgent the button on the entrance of the system. It’s best to hear the doorbell chime inside your private home and obtain a notification in your cellphone.

5. Customise your settings

The Ring app means that you can customise varied settings on your doorbell, together with:

Setting	Description
Movement detection	Alter the sensitivity of the movement detector to attenuate false alerts.
Video recording	Select the recording high quality and size of movies captured by the doorbell.
Night time imaginative and prescient	Allow or disable night time imaginative and prescient to enhance visibility in low-light situations.
Alerts	Configure the varieties of alerts you obtain, corresponding to movement alerts or doorbell presses.
Shared customers	Add further customers who can entry the doorbell’s dwell view and obtain alerts.

Setting Up Your Ring App and Preferences

After you have put in your Ring Video Doorbell, you will have to arrange the Ring App in your smartphone or pill to entry its options and obtain notifications.

Listed below are the steps to arrange your Ring App:

Configuring Movement Detection and Notifications

As soon as your Ring Video Doorbell is put in, you may configure movement detection and notifications to get alerts when somebody approaches your door.

Movement Zones

Movement zones permit you to create particular areas the place the doorbell will detect movement. You may regulate the sensitivity and measurement of every zone to attenuate false alerts.

Movement Detection Settings

You may set the sensitivity of the movement sensor to regulate how rapidly it triggers an alert. You can even select between three modes: “Customary”, “Mild”, and “Frequent”.

Actual-Time Notifications

When the doorbell detects movement, it would ship a notification to your smartphone or pill. You may customise the notification settings to obtain alerts for all movement or just for particular zones.

Movement Alerts Playback

If you happen to miss an alert, you may overview the movement alert historical past within the Ring app. This lets you see what triggered the alert and take acceptable motion.

Privateness Zones

You may create privateness zones to dam out areas the place you do not need the doorbell to detect movement. This could embody areas like your neighbor’s property or a busy road.

Superior Movement Detection Settings

Within the Ring app, you may allow further movement detection settings to customise your alert system. These settings embody:

Movement Frequency: Set the variety of instances movement is detected earlier than an alert is triggered.
Movement Length: Alter the size of time movement have to be detected earlier than an alert is triggered.
Movement Ignore Zone: Specify a zone the place the doorbell is not going to detect movement.

Adjusting Video Settings

Customise the video settings of your Ring Video Doorbell to optimize the picture high quality and viewing expertise.

From the Ring app, choose your Doorbell, faucet “Video Settings,” and regulate the next:

Video Decision: Choose the video high quality between “Finest High quality” (highest decision) and “Energy Saving” (decrease decision).
Subject of View: Select a wider or narrower discipline of view to seize a broader or extra targeted space.
Night time Imaginative and prescient: Allow or disable night time imaginative and prescient to boost visibility in low-light situations.

Audio High quality

Tremendous-tune the audio high quality of your Doorbell to make sure clear communication with guests.

Entry “Audio Settings” inside the Ring app and regulate the next:

Quantity: Set the amount ranges for the microphone and speaker.
Echo Cancellation: Allow this function to attenuate echoes and enhance audio readability.
Noise Discount: Activate this feature to cut back background noise and improve speech intelligibility.

Energy Settings

Configure your Doorbell’s energy settings to optimize battery life or energy consumption.

Battery Mode: Select between “Optimum Energy Saving” (extends battery life) or “Finest Efficiency” (prioritizes video high quality).
Fast Launch Battery: Allow this feature for simple battery alternative with out eradicating the Doorbell from its mount.
Hardwire Package (Non-compulsory): Join your Doorbell to an influence supply utilizing the non-obligatory Hardwire Package to supply steady energy.

Troubleshooting Frequent Set up Points

1. Ring Machine Not Receiving Energy

Test the facility provide to make sure it is linked securely to the doorbell and outlet.
Reset the circuit breaker or exchange the fuse that powers the outlet.
If the problem persists, contact an electrician to examine the wiring.

2. Ring Machine Not Connecting to Wi-Fi

Confirm the Wi-Fi community identify and password are entered appropriately.
Transfer the Ring system nearer to the router to enhance sign energy.
Reset the router by unplugging it for 30 seconds and plugging it again in.

3. Ring Machine Not Detecting Movement

Alter the movement sensitivity settings within the Ring app.
Make sure the movement space is inside the vary specified on your system.
Clear any obstructions from the entrance of the doorbell that will block the movement sensor.

4. Ring Machine Not Sending Notifications

Test the notification settings within the Ring app to make sure they’re enabled.
Ensure the app has permission to ship notifications in your system.
Confirm that the web connection is secure and the Ring system is linked to Wi-Fi.

5. Ring Machine Not Recording Video

Test the recording settings within the Ring app to make sure it is enabled.
Confirm that the Ring system has sufficient cupboard space.
Clear the Ring system’s cache by urgent and holding the setup button for 20 seconds.

6. Ring Machine Not Enjoying Audio

Alter the audio settings within the Ring app.
Test the amount in your smartphone or pill.
Clear the speaker on the Ring system gently with a tender fabric.

7. Ring Machine Not Responding to Instructions

Ensure the Ring app is updated with the newest model.
Reset the Ring system by urgent and holding the setup button for 10 seconds.
If the problem persists, contact Ring help.

8. Ring Machine Always Disconnecting from Wi-Fi

Test for any Wi-Fi interference from different gadgets, corresponding to microwaves or child screens.
Replace the firmware on the Ring system to the newest model.
Contact Ring help if the problem persists regardless of troubleshooting steps.

9. Ring Machine Displaying a Black Display screen

Energy Cycle the Machine: Unplug the Ring system from its energy supply and plug it again in after 30 seconds.
Test for Firmware Updates: Set up the newest firmware replace on your Ring system via the Ring app.
Manufacturing facility Reset: Press and maintain the setup button on the again of the Ring system for 10 seconds to carry out a manufacturing unit reset.
Examine the Lens: Ensure there are not any obstructions or grime on the lens that would block the digital camera’s view.
Contact Ring Assist: If all troubleshooting steps fail, contact Ring help for additional help. They will present further troubleshooting steerage or assist diagnose a defective system.

Sustaining Your Ring Video Doorbell

Maintain the Battery Charged

Ring Video Doorbells function on rechargeable batteries. Usually, they will final 6-12 months on a single cost. When the battery will get low, you may obtain a notification in your cellphone. All the time have a spare battery readily available for fast alternative.

Clear Your Doorbell Repeatedly

Dust, mud, and particles can accumulate in your Ring Video Doorbell over time, affecting its efficiency. Repeatedly wipe it down with a humid fabric to maintain it clear.

Examine the Mounting

Ensure your Ring Video Doorbell is securely mounted on its base. Any free screws or motion could cause it to malfunction. Tighten any free {hardware} as wanted.

Test Wi-Fi Connectivity

Make sure that your Ring Video Doorbell has a robust Wi-Fi connection. Poor connectivity can result in missed notifications and unreliable video footage.

Replace the Software program

Ring releases software program updates commonly to enhance the doorbell’s performance. Maintain your system up to date to learn from the newest options and bug fixes.

Clear the Storage

Ring Video Doorbells retailer recorded footage within the cloud. Because the storage fills up, it may possibly decelerate the system and forestall new recordings. Periodically clear saved footage to maintain the doorbell working easily.

Reset Your Doorbell

If you happen to expertise persistent points along with your Ring Video Doorbell, contemplate resetting it to its manufacturing unit settings. This could resolve many software program or {hardware} glitches.

Defend from Excessive Climate

Ring Video Doorbells are designed to resist out of doors situations, however excessive warmth or chilly can shorten their battery life. Contemplate putting in a climate protect to guard the system.

Troubleshoot with Ring Assist

If you happen to encounter any unresolved points along with your Ring Video Doorbell, contact Ring Assist for help. They will present distant troubleshooting or ship a alternative system if mandatory.

Substitute Your Doorbell (Non-compulsory)

Ultimately, your Ring Video Doorbell could must be changed resulting from put on and tear or technological developments. Ring provides trade-in packages or reductions on new gadgets when upgrading.

The right way to Set up a Ring Video Doorbell

Supplies:

Ring Video Doorbell
Phillips head screwdriver
Drill or influence driver
Screws anchors (supplied with the doorbell)
Stage

Directions:

**Select the Set up Location:** Decide the specified location on your doorbell and guarantee there’s a energy supply close by.
**Flip Off Energy:** Swap off the facility to the doorbell circuit on the breaker or fuse field.
**Take away Present Doorbell (Non-compulsory):** If changing an current doorbell, take away the outdated system and disconnect the wires.
**Set up Mounting Bracket:** Use a screwdriver to connect the mounting bracket to the doorframe utilizing the screws and anchors supplied.
**Wire the Doorbell:** Join the doorbell wires to the terminals on the again of the mounting bracket, matching optimistic to optimistic and unfavorable to unfavorable. Safe the wires with the supplied wire nuts.
**Insert the Doorbell:** Slide the doorbell unit onto the mounting bracket till it snaps into place.
**Flip On Energy:** Restore energy to the doorbell circuit.
**Check the Doorbell:** Press the doorbell button to verify that it rings or sends a notification to your cellphone.
**Configure the Settings:** Use the Ring app to configure your doorbell’s settings, corresponding to movement detection, video high quality, and notifications.

FAQs About Ring Video Doorbell Set up

How lengthy does it take to put in a Ring Video Doorbell?

Most installations could be accomplished in beneath an hour, together with wiring.

Can I set up a Ring Video Doorbell on any door?

Sure, Ring Video Doorbells are suitable with most door varieties, together with wooden, steel, and glass.

Do I want knowledgeable to put in a Ring Video Doorbell?

No, most owners can set up a Ring Video Doorbell themselves utilizing the supplied directions.

Is a Ring Video Doorbell battery operated?

Some Ring Video Doorbell fashions are battery operated, whereas others require a wired connection.

Step	Directions
1	Obtain the Ring App from the App Retailer (iOS) or Google Play Retailer (Android).
2	Create a Ring account or log in if you have already got one.
3	Comply with the on-screen directions to attach your Ring Video Doorbell to your Wi-Fi community.
4	Arrange movement detection by adjusting the sensitivity and zones the place you need to obtain notifications.
5	Arrange privateness zones to exclude areas from movement detection, corresponding to your neighbor’s property or public sidewalks.
6	Customise your notifications Tailor your notifications to obtain alerts solely whenever you need. You may regulate settings corresponding to: Movement alerts: Obtain notifications when movement is detected. Ring alerts: Get notified when somebody presses the doorbell button. Neighbor alerts: Be a part of the Ring Neighbors group to obtain notifications about suspicious exercise in your space. Customized schedules: Set particular instances in the course of the day whenever you need to obtain notifications.
7	Save your settings and begin receiving notifications out of your Ring Video Doorbell.