6 Ways To Fit Really Long Hair In A Short Wig

In search of a strategy to rock a voluminous mane with out sacrificing size? Our information reveals the final word secret to effortlessly tucking even the longest locks into an elegant, brief wig. Whether or not you are looking for a classy pixie lower or a complicated bob, prepare to remodel your hair recreation with this revolutionary method. Let’s dive into the artwork of concealing lengthy strands beneath the flattering layers of a shorter wig.

Earlier than embarking on this hair-weaving journey, it is essential to collect the mandatory supplies. You may want a spacious sufficient wig that gives ample room on your hair, a sturdy band or string, and a pair of sharp scissors. As you start the wig-fitting course of, begin by dividing your pure hair into sections. It will make it simpler to handle and keep away from tangles. Safe the sections with small elastics or hair clips for ease of dealing with.

Now, it is time to don the wig. Fastidiously place it over your head and regulate the straps or elastic band for a comfortable match. Keep away from carrying the wig too tightly, as this may trigger discomfort and even hair breakage. As soon as the wig is safe, gently raise the highest layer of the wig and insert the primary part of your hair into the inside cap. Use a small crochet hook or a blunt needle to softly pull the hair by means of the cap. It will assist create a natural-looking and safe maintain. Repeat this course of for every part of your hair, taking care to distribute the hair evenly all through the wig for a balanced look.

Sectioning and Braiding the Hair

To efficiently match lengthy hair into a brief wig, exact sectioning and braiding are essential. Comply with these steps to make sure a safe and comfy match:

Divide the Hair into Sections

Half the hair into 4 distinct quadrants: entrance, again, left, and proper. Use hair clips or elastics to safe every part individually.

Braid the Hair

This step is essential for holding the hair securely in place. Start by braiding the again part first. Divide it into three strands and create a easy three-strand braid. Repeat the method for the left and proper sections.

For the entrance part, divide it into two equal components. Braid the left and proper parts into two separate three-strand braids. Safe the ends of every braid with a small hair elastic.

Ideas for Braiding

Use a wide-toothed comb to forestall hair breakage.
Braid the hair tightly to safe it in place.
If crucial, spray a light-weight mist of hairspray onto every braid to boost maintain.

Part	Braiding Type
Again	Three-strand braid
Left and Proper	Three-strand braid
Entrance	Two three-strand braids

Rolling and Tucking the Braids

This methodology entails creating a number of small braids ranging from the bottom of your neck and rolling them into compact bundles. The bundles are then tucked into the wig cap’s lining for a hid and safe match.

Step-by-Step Directions:

1. Divide your hair into 4 quadrants: prime entrance, prime again, backside entrance, and backside again. Safe every quadrant with a hair tie or clip.

2. Begin from the underside again quadrant: Part off a small portion of hair and braid it tightly from root to tip. Safe the underside of the braid with an elastic band.

3. Roll and tuck the braid: Fold the braid in half vertically, making a small loop. Gently roll the loop in the direction of the scalp till it types a good bun. Tuck the bun underneath the sting of the wig cap’s lining, securing it with bobby pins or invisible hairpins.

Extra Ideas:

Tip	Description
Use fine-tooth combs or brushes to detangle hair earlier than beginning.	This prevents breakage and tangles.
Braid the hair tightly.	Unfastened braids will unravel and create lumps underneath the wig.
Safe the wig cap firmly round your head earlier than tucking within the braids.	This ensures a comfortable and comfy match.
Use a mesh wig cap or a stocking cap for a breathable and versatile base.	This enables for higher air flow and prevents irritation.

Making a Base Cushion

The bottom cushion is essential for securing and distributing the load of your lengthy hair evenly. Comply with these detailed steps to create a sturdy basis:

Select a Cap: Choose a wig cap that matches snugly round your head. A stretchy, breathable material like nylon or lace will present consolation and suppleness.
Create a Half: Use the tip of a comb or bobby pin to create a clear half in your hair. It will decide the path of the wig’s hair.
Connect the Hairpieces: Ranging from the half, braid or twist small sections of your hair into small, flat cornrows. Safe them tightly with elastic bands or thread.
Create the Cushion: Utilizing a needle and thread, sew every cornrow onto the wig cap, making a agency, padded base. Be certain that the stitching is safe and evenly distributed.
Verify for Symmetry: Upon getting secured all of the cornrows, examine the cushion for symmetry and total stability. Modify the stitching or add further padding if crucial.
Trim Extra Hair: Trim any extra hair that peeks out from beneath the wig cap, utilizing sharp scissors. It will assist create a easy and safe match.

Supplies Wanted	Description
Wig cap	Stretchy, breathable materials to safe the cushion
Hairpieces	Braided or twisted sections of your personal hair
Needle and thread	To stitch the hairpieces to the wig cap
Sharp scissors	To trim extra hair

Securing the Braids

As soon as the braids are shaped, you will must safe them in place to create a agency basis for the wig. Here is an in depth information on easy methods to safe the braids:

1. Collect the Braids

Deliver all of the braids collectively on the crown of your head. Maintain them firmly with an elastic band or hair tie.

2. Create a Bun

Wrap the gathered braids across the elastic band to kind a bun. Safe the bun with bobby pins to maintain it in place.

3. Flatten the Bun

Use your fingers or a hairbrush to flatten the bun as a lot as doable. It will assist create a easy floor for the wig to take a seat on.

4. Safe with Netting or a Scarf

Cowl the flattened bun with a hairnet or a skinny scarf. It will assist maintain every thing in place and forestall the braids from shifting.

5. Extra Ideas for Securing Lengthy Braids

Listed below are some further ideas to make sure your lengthy braids are securely mounted:

Use a number of hair ties to carry the braids collectively on the crown. It will present further help and forestall slipping.
If the braids are very heavy, you could need to think about using bobby pins to strengthen the elastic band that secures the bun.
Fold the flattened bun in half or three-quarters earlier than masking it with the hairnet. This system helps compress the bun and preserve it from bulging underneath the wig.
When you’ve got significantly thick or coarse hair, you possibly can moist the braids barely earlier than creating the bun. It will assist soften the hair and make it simpler to flatten and safe.

Protecting the Braids with Hair

As soon as the braids are safe, you can begin masking them with hair. You need to use any kind of hair extension, however artificial hair is often a sensible choice for this function. Artificial hair is much less more likely to tangle or mat, and it’s also extra inexpensive than human hair. Making use of the hair extensions with glue is mostly not really useful, as it might harm each the hair extensions and your pure hair. Clip-in extensions or sew-in extensions are good choices to contemplate.

To use clip-in hair extensions, merely clip the extensions into your hair, beginning on the nape of your neck and dealing your means as much as the highest of your head. Sew-in extensions are extra everlasting, and they’re sewn into your pure hair. Sew-in extensions can final for a number of months, and they’re the most suitable choice for making a voluminous, long-lasting wig.

As soon as the hair extensions are in place, you possibly can model your wig as desired. You need to use a brush, a comb, or your fingers to model the hair. It’s also possible to use hairspray or mousse to carry the model in place. With a bit of follow, it is possible for you to to create a flawless wig that can make you feel and look stunning. Listed below are the steps for masking the braids with hair intimately:

Step

Motion

Brush your hair and collect it up right into a ponytail, then easy and flatten the hair as a lot as doable

Safe the hair into braids as near the scalp as doable

Flatten down any remaining bumps or lumps of hair

Apply a wig cap to hide the hair and preserve it in place

Place the brief wig over the wig cap and prepare it as desired

Wrap the surplus hair across the base of the wig
– Take a small part of hair from the again of the wig
– Wrap it across the base of the wig and pin it in place
– Repeat this course of till all the extra hair is roofed
– Use bobby pins or hairspray to safe the hair in place

Layering and Mixing

1. Separate Your Hair

Divide your hair into 3-4 vertical sections, securing every with an elastic band.

2. Create High Layer

Take the topmost part and braid it tightly. Safe with an elastic.

3. Add Extra Layers

Repeat step 2 for every remaining part.

4. Place Braids on Wig Cap

Place the wig cap in your head and place the highest braid on the crown. Safe with bobby pins.

5. Mix with Wig Hair

Gently pull out small sections of hair from the wig to mix with the sides of your braids.

6. Flatten Braid Ends

Use a curling iron to softly flatten the ends of the braids, making a hidden seam.

7. Trim and Type

As soon as all braids are blended, trim any extra wig hair to match your required size. Type with hairspray or serum to safe your look.

Ideas for Seamless Mixing:
– Use a wig cap that matches your pores and skin tone.
– Backcomb the wig hair barely across the edges to create quantity.
– Add hairspray or mousse to the mixing areas to maintain the hair in place.

Shaping and Styling the Wig

Now that your wig is clear and dry, it is time to form and magnificence it to your liking. Listed below are some tips about easy methods to obtain a natural-looking model:

Prepping the Wig

Earlier than styling, it is essential to detangle the hair utilizing a wide-toothed comb. Ranging from the ends and dealing your means as much as the roots, take away any knots or tangles gently. Keep away from brushing or combing the hair vigorously, as this may increasingly harm the fibers.

Reducing and Trimming

Relying on the specified size and form, you could must trim the wig. Use sharp scissors to rigorously lower away any extra hair, following the pure form of the top. For a extra personalised match, trim the hair throughout the cap as effectively.

Creating Layers

Including layers to the wig can provide it quantity and motion. Use a razor or sharp scissors to create layers all through the size of the hair. Begin from the ends and regularly work your means up, chopping at an angle to mix the layers seamlessly.

Styling with Warmth

If crucial, you should utilize warmth styling instruments to attain a desired look. Use a wide-toothed comb to detangle the hair and defend it from warmth harm. Set the warmth to a low or medium setting and maintain the styling instrument just a few inches from the hair.

Curling and Waving

If you wish to add curls or waves to the wig, use a curling iron or wand. Preserve the warmth setting low to keep away from damaging the fibers. Wind small sections of hair across the barrel, holding for just a few seconds earlier than releasing. You possibly can fluctuate the scale and tightness of the curls by adjusting the barrel dimension and holding time.

Straightening

To attain a straight look, use a flat iron. Begin from the roots and work your means down the size of the hair, making use of mild strain. Keep away from pulling on the hair and preserve the iron transferring always to forestall scorching.

Styling with Merchandise

To boost the form and maintain of the model, use styling merchandise corresponding to mousse, gel, or hairspray. Apply a small quantity to the hair and work it by means of along with your fingers or a comb. Keep away from overusing merchandise, as this may make the hair look greasy or stiff.

Sustaining and Caring for the Wig

Washing and Conditioning

To stop tangles and keep the wig’s shine, wash it each 2-3 weeks. Use lukewarm water and a clarifying shampoo particularly designed for artificial wigs. Keep away from rubbing or scrubbing, as a substitute gently therapeutic massage the lather into the hair. Situation the wig with an artificial wig conditioner to maintain it gentle and manageable.

Drying

After washing, gently squeeze out extra water and pat the wig dry with a towel. Don’t wring or twist it. Place the wig on a wig stand or model to air dry. Keep away from utilizing blow dryers or direct warmth, as this may harm the fibers.

Combing and Detangling

Use a wide-toothed comb to softly take away tangles. Begin from the ends and work your strategy to the roots to forestall breakage. Keep away from utilizing brushes, as they will pull out particular person fibers.

Styling

Styling an extended wig will be difficult, however with the fitting instruments and strategies, you possibly can obtain your required look. Use a heat-resistant wig brush and rollers to create curls or waves. Keep away from utilizing scorching styling instruments, as they will soften the artificial fibers.

Storage

When not in use, retailer the wig on a wig stand or model to take care of its form. Place it in a cool, dry location away from direct daylight and dirt.

Wig Care Merchandise

To maintain your wig trying its finest, put money into just a few important care merchandise:

Product	Use
Clarifying Shampoo	Removes product buildup and filth
Artificial Wig Conditioner	Moisturizes and softens the hair
Wig Brush	Gently detangles and types the hair
Warmth-Resistant Wig Rollers	Creates curls and waves with out damaging the fibers

Troubleshooting and Changes

1. Wig Too Tight

If the wig is just too tight, it might trigger discomfort and complications. To loosen the wig, you can also make small cuts alongside the elastic band in the back of the wig. It’s also possible to attempt stretching the wig by hand by pulling it in all instructions. Watch out to not over-stretch the wig, as this might harm it.

2. Wig Too Unfastened

If the wig is just too unfastened, it might slip and fall off. To tighten the wig, you should utilize bobby pins or wig tape. It’s also possible to attempt utilizing a wig grip, which is a band that wraps round your head and helps to maintain the wig in place.

3. Wig Too Lengthy

If the wig is just too lengthy, it may be troublesome to model and put on. To shorten the wig, you possibly can lower it to the specified size. It’s also possible to attempt tying the wig up in a bun or ponytail.

4. Wig Too Brief

If the wig is just too brief, it could not cowl all your hair. To make the wig longer, you possibly can add hair extensions. It’s also possible to attempt utilizing a wig topper, which is a small piece of hair that may be clipped onto the highest of your head.

5. Wig Too Thick

If the wig is just too thick, it may be heavy and uncomfortable to put on. To skinny out the wig, you should utilize thinning scissors or a razor blade. Watch out to not over-thin the wig, as this might harm it.

6. Wig Too Skinny

If the wig is just too skinny, it could not present sufficient protection. To thicken the wig, you possibly can add hair extensions. It’s also possible to attempt utilizing a wig volumizer, which is a product that may assist so as to add quantity to the hair.

7. Wig Too Frizzy

If the wig is just too frizzy, it might make it troublesome to model and put on. To scale back frizz, you should utilize a frizz management product. It’s also possible to attempt utilizing a hair dryer or flat iron to easy out the hair.

8. Wig Too Dry

If the wig is just too dry, it might change into brittle and break. To moisturize the wig, you should utilize a wig conditioner. It’s also possible to attempt utilizing a hair oil or serum to assist preserve the hair hydrated.

9. Wig Too Oily

If the wig is just too oily, it might change into greasy and troublesome to model. To take away oil from the wig, you should utilize a wig shampoo. It’s also possible to attempt utilizing a degreaser or a clarifying shampoo.

10. Wig Not Safe

If the wig will not be safe, it might slip and fall off. To safe the wig, you should utilize wig glue or tape. It’s also possible to attempt utilizing a wig grip or a wig band.

How To Match Actually Lengthy Hair In A Brief Wig

Becoming lengthy hair into a brief wig generally is a problem, however it’s doable with a bit of endurance and energy. Listed below are just a few ideas:

Begin by brushing your hair to take away any tangles or knots.
Collect your hair right into a excessive ponytail and safe it with a hair tie.
Place the wig over your head and regulate it in order that it’s centered and the hairline is aligned along with your pure hairline.
Use bobby pins to safe the wig to your head, beginning on the entrance and dealing your means round.
As soon as the wig is safe, you possibly can start to model the hair. Use a brush or comb to create the specified model.

Listed below are just a few further ideas for becoming lengthy hair into a brief wig:

In case your hair may be very lengthy, you could must braid it or wrap it round your head earlier than placing on the wig.
Use a wig cap to assist preserve your hair in place and forestall it from exhibiting by means of the wig.
Be affected person when styling the hair. It could take a while to get it to look simply the best way you need.

Individuals Additionally Ask About How To Match Actually Lengthy Hair In A Brief Wig

Can I take advantage of a wig cap to suit lengthy hair into a brief wig?

Sure, utilizing a wig cap will help preserve your hair in place and forestall it from exhibiting by means of the wig.

Can I braid my hair to suit lengthy hair into a brief wig?

Sure, braiding your hair will help scale back its quantity and make it simpler to suit into a brief wig.

Can I take advantage of bobby pins to safe lengthy hair into a brief wig?

Sure, bobby pins will help safe lengthy hair into a brief wig. Begin by securing the wig to your head, then use bobby pins to safe the hair across the edges of the wig.