Let’s face it, pool upkeep could be daunting. However in relation to draining your Intex pool, you do not have to let the duty overwhelm you. With the suitable instruments and some easy steps, you possibly can successfully drain your pool with out trouble. Whether or not you are making ready for the winter months or just have to refresh your pool water, this information will give you all the mandatory info to make sure a profitable drainage course of.
Earlier than embarking on the drainage, it is important to find out probably the most appropriate drainage technique to your Intex pool. Relying in your pool dimension, location, and entry to water disposal choices, you possibly can select from two main strategies: utilizing a submersible pump or connecting a backyard hose to the drainage valve. This information will cowl each methods intimately, offering clear directions and useful tricks to make the method as easy as doable.
As you proceed with the drainage, maintain security on the forefront. Guarantee you could have a transparent and secure work space, put on acceptable clothes and gloves, and be cautious of any potential electrical hazards. Moreover, think about the influence of draining your pool on the encircling surroundings and eliminate the water responsibly. By following the steps outlined on this information and adhering to security precautions, you possibly can confidently drain your Intex pool, leaving it prepared for its subsequent use or the dormant winter months.
Draining the Pool Water
Join the Backyard Hose
* Find the drain plug on the backside of the pool wall.
* Connect the backyard hose to the drain plug tightly.
* Make sure the hose is lengthy sufficient to succeed in an appropriate drainage space.
Pump the Water Out
* Activate the water provide to create a suction impact.
* The water will start to empty out of the pool.
* If the water circulate slows down, gently squeeze the hose to create a greater seal.
Monitor the Draining Course of
* Control the water degree because it drains.
* Cease the draining course of when the water is about 2-3 inches above the underside of the pool.
* Take away the drain plug and permit the remaining water to empty out naturally.
| Time | Quantity of Water Drained |
|---|---|
| First half-hour | Roughly 300 gallons |
| Subsequent half-hour | Roughly 200 gallons |
| Remaining time | Roughly 100 gallons |
Further Ideas for Draining Intex Pool:
* Use a submerged pump for quicker drainage.
* If the drain plug is troublesome to take away, use a pair of pliers to softly loosen it.
* Elevate the pool barely by inserting it on a platform to enhance drainage.
* Keep away from draining the pool on uneven surfaces, as this will trigger pooling and harm to the pool liner.
Eradicating Water from the Filter System
1. Flip Off the Filter System and Water Provide
Unplug the filter system and shut the water provide to the pool. This prevents any additional water from getting into the filter when you’re draining it.
2. Disconnect the Filter Hoses
Take away the inlet and outlet hoses from the filter system. When you’ve got a sand filter, take out the multiport valve meeting as effectively. Place an empty bucket or container close by to gather any remaining water.
3. Drain the Water from the Filter
To empty the water from the filter, you could have a number of choices:
Gravity Drain: Open the guide drain plug on the backside of the filter. Permit the water to empty naturally into the container. That is the best and most typical technique.
Pump Drain: Join a pump to the filter’s guide drain plug. This technique means that you can pump out the water quicker and extra effectively.
Siphon Drain: Create a siphon by submerging one finish of a transparent hose within the filter’s water and the opposite finish within the container. The water will begin flowing as a result of vacuum created.
For sand filters, additionally observe these steps:
| Step | Description |
|---|---|
| 1 | Take away the drain plug from the sand filter’s backside. |
| 2 | Place the filter’s drain plug within the container to gather the water. |
| 3 | Slowly activate the filter. |
| 4 | The water will begin draining out of the filter. |
Siphoning Water from the Pool
Step 1: Collect Supplies
Earlier than you begin, collect the mandatory supplies: a siphon hose (out there at most {hardware} shops), a bucket or bigger container, and a pair of pliers or wrench.
Step 2: Join the Siphon Hose
Connect one finish of the siphon hose to the bottom drain valve on the pool. The opposite finish ought to be submerged within the bucket or container.
Step 3: Prime the Siphon
To prime the siphon, fill the hose with water till it reaches the very best level. Then, shortly submerge the opposite finish within the bucket. Gravity will begin the water flowing, and the siphon will proceed to run so long as the hose stays submerged.
Step 4: Monitor the Draining Course of
Because the water drains, monitor its degree and regulate the siphon hose accordingly. Relying on the dimensions of the pool and the circulate price, draining might take a number of hours. If the siphon stops working, verify for clogs or air bubbles within the hose.
Step 5: Drain the Remaining Water
As soon as many of the water has been drained, there could also be a small quantity remaining within the backside of the pool. This may be eliminated utilizing a submersible pump or by manually bailing it out with a bucket.
Utilizing a Pump to Drain
Utilizing a pump to empty your Intex pool is a comparatively straightforward and environment friendly technique. Listed below are the steps you will have to observe:
Gathering Your Supplies
Earlier than you start, you will want to collect the next supplies:
- Submersible pump
- Backyard hose
- Bucket or different container
Setting Up the Pump
Place the submersible pump contained in the pool and join it to the backyard hose. The opposite finish of the hose ought to be positioned within the bucket or container the place you need the water to empty.
Priming the Pump
Most submersible pumps should be primed earlier than they’ll begin pumping water. To do that, fill the pump with water till it reaches the fill line. Chances are you’ll want to make use of a bucket to pour water into the pump.
Beginning the Pump
As soon as the pump is primed, you possibly can flip it on. It ought to begin pumping water instantly. If it would not, verify to be sure that the pump is correctly related to the hose and that the hose will not be kinked.
Monitoring the Water Degree
Because the pump drains the water, you will want to watch the water degree within the pool. As soon as the water degree has dropped under the extent of the pump, you will have to cease the pump and transfer it to a decrease location within the pool.
Further Ideas
Listed below are just a few extra suggestions for draining your Intex pool utilizing a pump:
| Tip | Description |
|---|---|
| Use a high-capacity pump. | This can assist to empty the pool quicker. |
| Place the pump within the deepest a part of the pool. | This can assist to make sure that the pump is ready to drain the complete pool. |
| Preserve the pump working repeatedly. | This can assist to stop the pump from overheating. |
Troubleshooting Widespread Drainage Points
Downside: Water Circulate is Sluggish
Examine the drain plug and the tip of the hose for any clogs. This could possibly be brought on by particles, leaves, or dust. In that case, take away the obstruction and water will start to empty once more.
Downside: Pool Cowl is Obstructing the Drain
Take away the pool cowl and proceed draining. You may set up the duvet later as soon as the pool is empty.
Downside: Drain Hose is Kinked
Be certain that the drain hose is positioned correctly and never kinked or twisted. Straighten out the hose and take away any kinks to permit water to circulate by way of.
Downside: Drain Plug is Not Securely Connected
Examine if the drain plug is totally inserted and correctly tightened. Tightening it would create a seal and stop water from leaking.
Downside: Pool is Not Degree
Place a degree on the aspect of the pool to find out if it is degree. If it is not, increase the decrease finish to tilt the water in direction of the drain.
Downside: Clogged Filter Cartridge
When you’ve got a filter pump, clear the filter cartridge. A clogged cartridge can cut back water circulate and hinder drainage.
Downside: Drain Plug Will not Open
In uncommon circumstances, the drain plug could also be caught on account of corrosion or particles. If you cannot open it manually, you could want to make use of pliers or a wrench. Keep away from over-tightening.
Downside: Drain Cap is Unfastened
Examine the drain cap on the pool wall. If it is unfastened, tighten it utilizing a screwdriver or wrench.
Downside: Gap in Drain Hose
Examine for any holes or tears within the drain hose. Should you discover any harm, change the hose with a brand new one.
Security Precautions
- Disconnect all electrical cords from the pump and filter.
- Be certain that the pool will not be plugged into {an electrical} outlet.
- Put on gloves and eye safety when dealing with chemical substances.
- Observe the producer’s directions for chemical utilization and disposal.
- Supervise youngsters always close to the pool.
- By no means drain the pool immediately right into a sewer or storm drain.
- Use a hose or bucket to empty the water into a chosen space, akin to a garden or backyard.
- Pay attention to any underground pipes or cables which may be buried close to the pool.
- If there’s any doubt in regards to the security of draining the pool, contact a certified skilled.
- Further Security Precautions for Utilizing a Sump Pump:
- Use a floor fault circuit interrupter (GFCI) to stop electrical shock.
- Be certain that the sump pump is related to a separate electrical circuit.
- Examine the sump pump commonly to make sure that it’s functioning correctly.
- Preserve the sump pump space away from particles and obstructions.
- If the sump pump fails, unplug it and call a certified skilled for restore.
How To Drain Intex Pool
Draining an Intex pool is a straightforward course of that may be accomplished in just a few steps. First, you will want to collect the mandatory supplies, which embody a backyard hose, a submersible pump, and a bucket. Upon getting gathered your supplies, you possibly can start the draining course of.
To start, connect the backyard hose to the submersible pump. Then, place the submersible pump within the pool and switch it on. The pump will start to pump water out of the pool and into the backyard hose. As soon as the water degree has dropped under the extent of the pump, you possibly can flip off the pump and take away it from the pool.
Subsequent, you will want to make use of the bucket to bail out the remaining water from the pool. As soon as all the water has been faraway from the pool, you possibly can fold it up and retailer it away for future use.
Folks Additionally Ask About How To Drain Intex Pool
What’s the easiest way to empty an Intex pool?
One of the best ways to empty an Intex pool is to make use of a submersible pump. Submersible pumps are designed to pump water out of flooded areas, and they’re highly effective sufficient to empty a pool shortly and effectively.
Can I exploit a backyard hose to empty an Intex pool?
Sure, you need to use a backyard hose to empty an Intex pool. Nevertheless, it would take longer to empty the pool utilizing a backyard hose than it would utilizing a submersible pump.
How do I eliminate the water from my Intex pool?
One of the best ways to eliminate the water out of your Intex pool is to empty it right into a storm drain. Should you should not have entry to a storm drain, you can even drain the water right into a ditch or different low-lying space.
