Folding away your Tommy Bahama chair ought to be as stress-free as sitting in it. Nonetheless, in case you are struggling to shut your Tommy Bahama chair, don’t worry you aren’t alone. Fortunately, with a number of easy steps, you can shut your chair and retailer it away with ease. Comply with these step-by-step directions and useful tricks to make the method a breeze.
Step one to shut your Tommy Bahama chair is to make sure that the again of the chair is going through you. Subsequent, pull up on the armrests till they click on into place. As soon as the armrests are locked in place, grip the seat of the chair with each palms and pull it towards you till it’s near your physique. Then, raise the seat up and over the again of the chair till it’s fully folded.
Lastly, safe the chair by tucking the flaps on the edges of the seat below the armrests. Your Tommy Bahama chair ought to now be closed and prepared for storage or transport. Whether or not you’re packing up for a day on the seaside or storing your chair for the winter, folding it away ought to be a fast and simple job. By following these easy steps, you’ll be able to make sure that your chair is correctly closed and prepared in your subsequent use.
Dismantling the Seat and Backrest
To start dismantling the Tommy Bahama chair, you must first take away the seat cushion by unzipping the material cowl. After eradicating the seat cushion, you have to to establish the screws and/or bolts that maintain the seat body to the backrest body. Rigorously take away the entire {hardware} that you just discover. After you have eliminated the entire {hardware}, you’ll be able to gently raise the seat body away from the backrest body.
To separate the backrest body into its particular person items, you may must find the screws and/or bolts that maintain the backrest slats in place. After you have recognized the {hardware}, fastidiously take away it and put aside the backrest slats. Subsequent, you must take away any further {hardware} that’s holding the backrest body collectively. After you have eliminated this {hardware}, you’ll be able to fastidiously separate the backrest body into its particular person items.
| Step | Motion |
|---|---|
| 1 | Take away the seat cushion by unzipping the material cowl. |
| 2 | Determine and take away the screws and/or bolts that maintain the seat body to the backrest body. |
| 3 | Gently raise the seat body away from the backrest body. |
| 4 | Find the screws and/or bolts that maintain the backrest slats in place and take away them. |
| 5 | Take away any further {hardware} that’s holding the backrest body collectively. |
| 6 | Rigorously separate the backrest body into its particular person items. |
Detaching the Armrests
Start by checking in case your Tommy Bahama’s armrests have quick-release levers, sometimes positioned on the underside of the arms. In that case, merely pull the levers to launch the arms. If not, you have to to unscrew the bolts that safe the arms to the chair. Utilizing a wrench or socket, fastidiously unbolt the arms, being conscious to not overtighten or loosen the bolts.
Disassembling the Armrests
as soon as the armrests are indifferent from the chair, you’ll be able to disassemble them for additional storage or transport. To do that, find the screws or bolts that safe the 2 elements of the armrest collectively. They’re sometimes positioned on the internal aspect of the armrest. Unscrew the connectors and separate the 2 armrest parts.
| Part | Location |
|---|---|
| Bolts | Underside of arms |
| Screws | Interior aspect of armrests |
Disassembling the Material
Step 1: Take away the Velcro Straps
Find the Velcro straps on the underside of the chair. Rigorously pull them aside to launch the material from the body.
Step 2: Unzip the Material
Discover the zipper positioned on the again or backside of the chair. Unzip it to separate the material from the body.
Step 3: Separate the Material Halves
As soon as the zipper is unzipped, gently pull the 2 material halves aside. They need to come away simply.
Step 4: Take away the Material Sleeves
Find the material sleeves that enclose the chair’s poles. The sleeves could have Velcro straps or buttons. Rigorously take away them to totally disassemble the material:
| Sleeve Sort | Elimination Technique |
|---|---|
| Velcro Straps | Gently pull the Velcro straps aside. |
| Buttons | Press down on the buttons and concurrently pull the sleeve away. |
| Zipper | Unzip the zipper to launch the sleeve. |
Eradicating the Cushion Stuffing
1. Unzip the underside of the cushion cowl and take away the stuffing.
2. Examine if the stuffing is moist or broken. Whether it is, you have to to exchange it.
3. If the stuffing remains to be in good situation, you’ll be able to merely stuff it again into the cushion cowl.
4. Zip up the cushion cowl and place the cushion again on the chair.
Cleansing and Inspecting the Body
Common cleansing and inspection are important to sustaining the longevity and performance of your Tommy Bahama chair. This is an in depth information that can assist you do it successfully:
Step 1: Select the Proper Cleansing Resolution
Use a light cleaning soap resolution or a business cleaner particularly designed for out of doors furnishings. Keep away from utilizing harsh chemical compounds or abrasive cleaners, as they’ll injury the body.
Step 2: Apply the Cleansing Resolution
Use a mushy material or sponge to use the cleansing resolution to the body. Work in small sections, gently scrubbing away any grime or particles.
Step 3: Rinse Completely
As soon as the grime and dirt have been eliminated, rinse the body completely with clear water. Use a backyard hose or a bucket of water to take away all traces of the cleansing resolution.
Step 4: Permit to Air Dry
After rinsing, enable the body to air dry fully. Don’t use a towel or material to dry it, as this may entice moisture and result in mildew or mildew.
Step 5: Examine for Harm
Whereas the body is drying, examine it intently for any indicators of harm. Examine for cracks, free joints, or every other points that must be addressed.
Step 6: Restore Any Harm
In case you discover any injury, comply with these steps to restore it:
- For minor cracks or free joints, use a marine-grade epoxy or sealant to restore them.
- For bigger cracks or damaged elements, you could must contact Tommy Bahama customer support or an expert restore store for help.
- As soon as the repairs are full, enable the body to remedy or dry based on the producer’s directions.
Recovering the Material
1. Take away the Outdated Material
Start by utilizing a seam ripper to fastidiously take away the prevailing material from the chair. Take care to not injury the body of the chair.
2. Put together the New Material
Measure the chair body to find out how a lot material you have to. Minimize the brand new material to the right dimension, permitting for a 2-inch overlap on all sides.
3. Stretch the Material Over the Body
Lay the brand new material over the body and stretch it tightly. Use a staple gun to safe the material to the body, spacing the staples about 1 inch aside.
4. Trim the Extra Material
As soon as the material is stapled, trim away any extra material across the edges of the chair.
5. Iron the Material
Use an iron to softly press the material into place and take away any wrinkles.
6. Apply Trim (Elective)
If desired, you’ll be able to add ornamental trim to the perimeters of the material. Safe the trim with material glue or a staple gun.
7. Create a Comfy Cushion
Minimize a bit of froth or batting to the dimensions of the chair seat. Cowl the froth with material and staple it in place. Place the cushion on the chair seat for added consolation.
| Materials | Amount | Measurement | Value |
|————————-|————-|————–|———-|
| Material | 1 yard | Varies | $20-$50 |
| Foam or batting | 1 piece | Varies | $10-$20 |
| Staple gun | 1 | Varies | $10-$20 |
| Material glue (non-obligatory) | 1 tube | Varies | $5-$10 |
| Ornamental trim (non-obligatory) | 1 package deal | Varies | $5-$10 |
Attaching the Armrests
Now that the seat and again are hooked up to the bottom, it is time to connect the armrests. Begin by figuring out the left and proper armrests. They are going to be labeled accordingly. Subsequent, find the 4 bolts that will likely be used to connect the armrests to the body. These bolts will sometimes be 5/16″ x 1-1/2″ in dimension. After you have recognized the bolts, insert them into the holes within the armrests and tighten them till they’re comfortable.
As soon as the armrests are hooked up to the body, now you can connect the armrest covers. Begin by slipping the armrest cowl over the armrest. Be sure that the quilt is correctly aligned and that the Velcro straps are going through the within of the armrest. Subsequent, safe the Velcro straps across the armrest and tighten them till they’re comfortable.
| Left armrest | Connect the armrest cowl by slipping it over the armrest and securing the Velcro straps across the armrest. |
| Proper armrest | Connect the armrest cowl by slipping it over the armrest and securing the Velcro straps across the armrest. |
Your Tommy Bahama chair is now full. Take pleasure in!
How To Shut A Tommy Bahama Chair
Tommy Bahama chairs are a preferred alternative for out of doors furnishings as a result of they’re snug, fashionable, and sturdy. Nonetheless, they could be a bit difficult to shut, particularly in the event you’re not used to it. Listed here are the steps on the way to shut a Tommy Bahama chair:
- Find the discharge lever. The discharge lever is positioned on the aspect of the chair, close to the again. It’s often a small, metallic lever.
- Pull the discharge lever. It will launch the lock that’s holding the chair open.
- Fold the chair in half. As soon as the lock is launched, you’ll be able to fold the chair in half by bringing the 2 sides collectively.
- Safe the chair. As soon as the chair is folded, that you must safe it in order that it would not come open once more. There may be often a strap or buckle that you should utilize to do that.
Individuals Additionally Ask
How do you open a Tommy Bahama chair?
To open a Tommy Bahama chair, merely comply with the steps above in reverse order. Begin by unbuckling the strap or buckle that’s securing the chair. Then, raise the chair up and pull it open till it locks into place.
How do you modify the recline on a Tommy Bahama chair?
Most Tommy Bahama chairs have adjustable recline positions. To regulate the recline, merely raise the chair up and pull it again till it locks into the specified place.
How do you clear a Tommy Bahama chair?
To wash a Tommy Bahama chair, merely wipe it down with a moist material. You may as well use a light cleaning soap resolution if obligatory. You’ll want to rinse the chair completely with water afterwards and permit it to dry fully earlier than utilizing it once more.
