If you happen to’re like most electrical bike riders, you will ultimately want to alter a rear tube. It isn’t a tough process, however it does require just a few specialised instruments. On this article, we’ll stroll you thru the steps on learn how to change the rear tube on an electrical bike. We’ll additionally present some tips about learn how to keep away from flats sooner or later.
First, you will want to collect just a few instruments. You may want a pair of tire levers, a brand new tube, and a patch equipment. You may additionally need to have a pair of gloves available to guard your palms from the tire levers. After you have your instruments, you are able to get began.
To start out, you will have to take away the rear wheel from the bike. To do that, merely flip the bike the other way up and find the 2 bolts that maintain the wheel in place. Take away the bolts after which rigorously carry the wheel off of the bike. As soon as the wheel is off, you may lay it down on the bottom and start altering the tube.
Disassembly of Rear Wheel
1. Take away the brake caliper
Utilizing a 5mm Allen key, loosen the bolts that maintain the brake caliper to the body. Rigorously take away the brake caliper and set it apart. Watch out to not harm the brake line.
2. Take away the wheel
Use a 15mm wrench to loosen the axle nuts on either side of the wheel. As soon as the nuts are free, you may pull the wheel straight out of the body.
3. Take away the tube
The tube is held in place by a tire liner. To take away the tube from the liner:
1. Insert a tire lever between the tire and the liner. Pry the tire away from the liner sufficient to reveal the valve stem.
2. Use a pair of pliers or a tube wrench to unscrew the valve core. Enable all of the air to flee from the tube.
3. Use your fingers or a tire lever to rigorously pull the tube out of the tire.
| Steps |
|---|
| Insert a tire lever between the tire and the liner. |
| Pry the tire away from the liner sufficient to reveal the valve stem. |
| Use a pair of pliers or a tube wrench to unscrew the valve core. |
| Enable all of the air to flee from the tube. |
| Use your fingers or a tire lever to rigorously pull the tube out of the tire. |
Tube Inspection and Elimination
Preparation:
Previous to beginning any upkeep, guarantee the electrical is powered off and the battery is disconnected. Collect the required instruments, together with a wrench, pliers, and a tire lever set.
Tube Inspection:
Examine the rear tube totally for any punctures or harm.Inflate the tube barely and submerge it in a bucket of water to establish any leaks. If leaks are detected, exchange the tube.
Tube Elimination:
Begin by loosening the nuts on the axle with a wrench. Use pliers to take away the axle bolt and spacer. Rigorously carry the wheel off the axle.
As soon as the wheel is eliminated, take away the valve cap and use a tire lever to pry the tire bead away from the rim. Work your manner across the tire, regularly prying it free till you may carry it off the rim.
With the tire eliminated, you may entry the tube. Grip the tube firmly and punctiliously pull it away from the rim. Be conscious to not harm the tube or the rim.
Detailed Directions for Eradicating the Tube:
| Step | Motion |
|---|---|
| 1 | Loosen the axle nuts. |
| 2 | Take away the axle bolt and spacer. |
| 3 | Elevate the wheel off the axle. |
| 4 | Use a tire lever to pry the tire bead away from the rim, beginning on the valve stem and dealing your manner round. As you pry the bead free, work the tire off the rim by rolling it away from the middle. |
| 5 | Take away the tube by gripping it firmly and gently pulling it away from the rim. |
As soon as the tube is eliminated, examine it for harm and exchange it if essential.
How To Change The Rear Tube On Electrical
Altering the rear tube on an electrical bike is a comparatively easy process that may be accomplished in just a few steps. This is a step-by-step information that will help you get the job completed:
- Collect the required instruments and supplies. You have to a brand new rear tube, a tire lever, a patch equipment, and a pump.
- Take away the rear wheel. To do that, you will have to find the quick-release lever on the aspect of the bike body. After you have discovered the lever, open it and pull the wheel in the direction of you to take away it.
- Take away the outdated tube. After you have eliminated the rear wheel, you will have to take away the outdated tube. To do that, use the tire lever to pry the tire bead away from the rim. After you have pryed the tire bead away, you may pull the outdated tube out of the tire.
- Set up the brand new tube. Take the brand new tube and insert it into the tire. Be sure that the valve stem is lined up with the outlet within the rim. After you have inserted the brand new tube, you should utilize the tire lever to pry the tire bead again onto the rim.
- Inflate the tire. After you have put in the brand new tube, you may inflate the tire. You’ll want to inflate the tire to the advisable strain, which might be discovered on the sidewall of the tire.
- Reinstall the rear wheel. After you have inflated the tire, you may reinstall the rear wheel. To do that, merely slide the wheel into the body and shut the quick-release lever.
