Binding a quilt by machine is a comparatively easy course of that may be accomplished in a number of hours. It’s a good way to complete off a quilt and provides it an expert look. Plus, it is a good way to make use of up any leftover material from the quilt prime. This is a step-by-step information on the best way to bind a quilt by machine:
First, you have to to assemble your supplies. You’ll need the quilt prime, the quilt batting, the quilt backing, and the binding material. Additionally, you will want a stitching machine, thread, a strolling foot (optionally available), and a rotary cutter or scissors. After getting your whole supplies, you’ll be able to start the binding course of.
Step one is to stitch the quilt prime to the quilt batting. Use a big sew size, corresponding to 4 or 5, and stitch across the perimeter of the quilt. Trim any extra batting. Subsequent, you have to to stitch the quilt backing to the quilt prime. Use the identical sew size and stitch across the perimeter of the quilt. Trim any extra backing. Now, you’re prepared to connect the binding.
Setting Up Your Machine
Earlier than you start quilting by machine, you may must arrange your stitching machine correctly. This is a step-by-step information that can assist you get began:
1. Select the Proper Needle
Step one is deciding on the proper needle on your quilt. For many quilting functions, a dimension 10 or 11 common needle will work properly. In the event you’re utilizing a thicker thread or material, you might want to make use of a bigger needle.
2. Set up the Strolling Foot
A strolling foot is a necessary device for machine quilting. Because the identify implies, it “walks” over the quilt material, serving to to stop puckering or skipped stitches. To put in the strolling foot, first take away the common presser foot out of your machine. Then, connect the strolling foot in response to the producer’s directions. Most strolling toes include a spacer that should be inserted into the machine’s needle clamp to stop the foot from interfering with the needle.
| Spacers for Totally different Machines | |
|---|---|
|
Machine |
Spacer |
|
Brother |
6 mm |
|
Janome |
4 mm |
|
Singer |
2 mm |
3. Thread Your Machine
Subsequent, you may want to string your machine with the specified thread. For quilting, it is best to make use of a high-quality cotton or polyester thread. As soon as the thread is threaded, pull it by the needle and below the presser foot.
Selecting a Sew
The kind of sew you select will have an effect on the look and sturdiness of your quilt binding. The most well-liked sew for machine binding is the straight sew. It is a robust and easy sew that’s comparatively simple to stitch.
If you’d like a extra ornamental look, you’ll be able to select an ornamental sew, corresponding to a zigzag sew or a blind hem sew. Ornamental stitches can add a contact of character to your quilt. Nevertheless, they don’t seem to be as robust as a straight sew, so that they will not be appropriate for quilts that shall be used incessantly.
The next desk compares the various kinds of stitches that can be utilized for machine binding:
| Sew | Power | Ease of Stitching |
|---|---|---|
| Straight sew | Sturdy | Straightforward |
| Zigzag sew | Much less robust than a straight sew | Tougher to stitch than a straight sew |
| Blind hem sew | Much less robust than a straight sew | Tougher to stitch than a straight sew |
Finally, one of the simplest ways to decide on a sew is to experiment and see what works finest on your quilt. You might wish to take a look at out totally different stitches on a scrap piece of cloth earlier than you begin stitching in your quilt.
Binding the Quilt
After getting sewn the quilt, it’s time to bind the perimeters to complete it off and make it look extra skilled. There are a number of other ways to bind a quilt, however the most typical technique is to make use of a quilt binding. Quilt binding is a strip of cloth that’s folded over the sting of the quilt and sewn down. It may be comprised of any sort of cloth, however it’s sometimes comprised of a coordinating material that enhances the quilt.
To bind a quilt, you have to the next supplies:
- Quilt binding
- Quilting thread
- Stitching machine
- Iron and ironing board
Listed below are the steps on the best way to bind a quilt by machine:
1. Put together the quilt binding
Step one is to organize the quilt binding. The binding must be minimize into strips which might be 2.5 inches large. The size of the strips will range relying on the dimensions of the quilt. You’ll need sufficient strips to go across the complete perimeter of the quilt, plus a number of additional inches for overlap.
2. Fold the quilt binding in half
As soon as the quilt binding is minimize, fold it in half lengthwise, unsuitable sides collectively. Press the fold with an iron to create a crease.
3. Pin the quilt binding to the quilt
Pin the quilt binding to the sting of the quilt, proper sides collectively. The uncooked fringe of the quilt binding must be aligned with the uncooked fringe of the quilt. Begin pinning within the middle of 1 aspect of the quilt and work your manner round, pinning each few inches.
4. Sew the quilt binding
As soon as the quilt binding is pinned, it’s time to sew it down. Use a zigzag sew to stitch the quilt binding to the quilt. Begin stitching within the middle of 1 aspect of the quilt and work your manner round, stitching slowly and thoroughly. Make sure you backstitch in the beginning and finish of every seam.
After getting sewn across the complete quilt, trim the surplus binding from the corners. Then, fold the binding to the again of the quilt and press it down with an iron. The quilt is now completed and able to get pleasure from!
Ending the Binding
Ending the binding of a quilt entails securing the binding across the edges of the quilt after which creating an ornamental end. This may be completed by machine or by hand, and each strategies have their very own benefits and drawbacks. As soon as the binding has been sewn across the edges of the quilt, you have to to complete it. You are able to do this by hand or by machine. There are numerous other ways to complete the binding, so select the one that you simply like the most effective.
Listed below are the steps on the best way to end the binding by machine:
- Fold the binding over the sting of the quilt and press it down. Use a sizzling iron and press firmly to create a crisp crease.
- Topstitch the binding down. Use a needle and thread that matches the binding material. Begin stitching in the midst of one aspect of the quilt and work your manner round, taking small, even stitches.
- Trim the surplus binding. Use a pointy pair of scissors to trim the surplus binding near the stitching line.
- Miter the corners. This step is optionally available, however it can give your binding a extra skilled end. To miter the corners, fold the binding at a 45-degree angle and trim the surplus material. Then, unfold the binding and press it flat.
- Topstitch the corners. Use a needle and thread that matches the binding material. Begin stitching within the middle of 1 nook and work your manner round, taking small, even stitches.
- Tuck the ends of the binding below. Fold the ends of the binding below by about 1/4 inch and press them down. Then, topstitch the ends of the binding down.
Benefits of Ending the Binding by Machine:
- Ending the binding by machine is faster than doing it by hand.
- It’s simpler to get a constant sew when ending the binding by machine.
- Machine-finished binding is much less prone to fray or come undone.
Disadvantages of Ending the Binding by Machine:
- Machine-finished binding can typically look cumbersome or stiff.
- It may be troublesome to get the machine to stitch near the sting of the quilt.
- Machine-finished binding can typically pucker or ripple.
Trimming and Urgent the Binding
As soon as the binding is sewn on, it is time to trim and press it to offer it a completed look.
Trimming the Binding
Use a rotary cutter and ruler or scissors to trim the binding to 1/2 inch from the sting of the quilt. Watch out to not minimize into the quilt.
Urgent the Binding
Press the binding twice to set the creases and provides it an expert end.
- Fold the binding over to the again of the quilt, masking the uncooked edges.
- Press the binding down, being cautious to not press the quilt. The binding must be pressed from the proper aspect.
- Fold the binding again over to the entrance of the quilt.
- Press the binding down once more, this time urgent each the binding and the quilt.
The binding ought to now be pressed and secured, giving your quilt a refined look.
Troubleshooting Widespread Points
1.Puckering or Gathering: Guarantee your quilt prime and backing are sq.. If vital, trim them to dimension. Use a strolling foot to assist distribute the material evenly.
2.Wavy or Rippled Binding: This might be attributable to stretching the binding whereas stitching. Make sure you feed the binding by evenly and keep away from pulling it.
3.Binding Too Free or Tight: Modify the width of the binding strips. For a tighter bind, use narrower strips; for a looser bind, use wider strips.
4.Corners Not Mitered Correctly: Apply mitering corners earlier than binding your entire quilt. Guarantee your corners are 45 levels and that they overlap barely.
5.Material Fraying: Use a cloth glue stick or stitch-witchery to stop the perimeters of the binding from fraying.
6. Binding Coming Free: Guarantee your stitches are safe. Use a powerful thread and stitch near the sting of the binding. Double sew the binding for added energy.
7. Quilting Stippling Seen: In the event you want to conceal the quilting stitches on the binding, use an extended sew size or a wider binding strip.
8. Suggestions for Troubleshooting Binding Issues:
- Use a constant sew all through the binding course of.
- Iron the binding strips prematurely to make stitching simpler.
- Hand-baste the binding in place earlier than machine stitching to make sure accuracy.
- Make every nook step by step by mitering small sections at a time.
- Begin and cease stitching a number of stitches into the binding overlap to stop unraveling.
- If a bit of the binding is uneven, rigorously take away it and resew it.
- When becoming a member of the binding ends, trim them at a 45-degree angle and overlap them barely.
- Examine your entire binding as soon as full to make sure it’s safe and evenly distributed.
Potential Drawback Answer Pucker or collect Guarantee quilt prime and backing are squared, use strolling foot Wavy or rippled Keep away from stretching binding whereas stitching Too free or tight Modify width of binding strips Corners not mitered Apply mitering, guarantee 45° angles, slight overlap Binding coming free Safe stitches, use robust thread, double sew Quilting seen Enhance sew size, use wider binding strip 10. Ending the Binding
As soon as you’ve got sewn the binding all the best way across the quilt, you may want to complete it off. This is how:
- Trim the surplus binding: Trim any extra binding from the corners, leaving about 1/4 inch past the seam allowance.
- Fold the binding over the uncooked edge: Fold the binding over the uncooked fringe of the quilt, aligning the folded edge with the uncooked edge.
- Pin the binding in place: Pin the binding in place across the complete quilt, utilizing loads of pins to maintain it safe.
- Sew the binding down: Sew the binding down by hand or machine, utilizing a small, tight sew. Begin and end the stitching about 2 inches from the nook.
- Miter the corners: To create a professional-looking end, you may must miter the corners. This is how:
Fold the binding over itself at a 45-degree angle. Trim the surplus binding. Unfold the binding and press it flat. Refold the binding over the uncooked fringe of the quilt. Pin and sew the binding in place. Repeat for all 4 corners. - Safe the binding at the place to begin: As soon as you’ve got mitered all 4 corners, sew the binding down at the place to begin to safe it.
How To Bind A Quilt By Machine
Binding a quilt by machine is a good way to complete off your venture and provides it an expert look. It is also a comparatively simple course of, and will be completed in just some hours. This is a step-by-step information on the best way to bind a quilt by machine:
Supplies You will Want:
- Quilt batting
- Quilt prime
- Quilt backing
- Binding material
- Thread
- Stitching machine
- Strolling foot (optionally available)
Directions:
- Put together your quilt by trimming any extra batting or material. The quilt must be sq. or rectangular, and the perimeters must be even.
- Reduce strips of binding material which might be 2 1/2 inches large. The size of the strips will range relying on the dimensions of your quilt. You’ll need sufficient strips to go across the complete perimeter of the quilt, plus a number of additional inches for overlap.
- Be part of the strips of binding material collectively by stitching them end-to-end. Use a 1/4-inch seam allowance.
- Fold the binding in half lengthwise, unsuitable sides collectively. Press the fold to create a crease.
- Open up the binding and place it across the fringe of the quilt, proper sides collectively. The uncooked fringe of the binding must be aligned with the uncooked fringe of the quilt.
- Pin the binding in place across the quilt, utilizing a 1/4-inch seam allowance.
- Connect a strolling foot to your stitching machine, if desired. A strolling foot will assist to stop the material from shifting as you sew.
- Set your stitching machine to a straight sew and a sew size of two.5 to three mm.
- Beginning at one nook of the quilt, sew the binding to the quilt, utilizing a 1/4-inch seam allowance. Sew across the complete perimeter of the quilt, stopping at the place to begin.
- Trim the surplus binding on the corners, leaving a 1/4-inch overlap.
- Fold the overlap of the binding to the again of the quilt and miter the corners
- Hand-stitch the binding to the again of the quilt, utilizing a blind sew.
Individuals Additionally Ask About How To Bind A Quilt By Machine
How do you bind a quilt by machine with mitered corners?
To bind a quilt by machine with mitered corners, you have to to trim the surplus binding on the corners, leaving a 1/4-inch overlap. Fold the overlap of the binding to the again of the quilt and miter the corners. To miter the corners, fold the binding in half diagonally, unsuitable sides collectively. Trim the surplus material on the level, leaving a 1/4-inch seam allowance. Unfold the binding and press the crease. Fold the binding again over the nook of the quilt, proper sides collectively, and stitch the mitered nook in place.
What’s one of the simplest ways to bind a quilt?
One of the simplest ways to bind a quilt is dependent upon your private preferences and the look you are attempting to attain. Machine binding is a fast and simple solution to end a quilt, and it may be completed with or with out mitered corners. Hand binding is a extra conventional technique that offers a extra polished look, however it’s also extra time-consuming. Finally, one of the simplest ways to bind a quilt is the best way that you’re most snug with and that offers you the outcomes you need.
