There are quite a few methods to finish a quilt, and understanding methods to machine bind a quilt is a beneficial talent for any quilter. Machine binding is an environment friendly technique to safe the layers of your quilt collectively whereas including an ornamental contact. Better of all, it’s a simple approach that may be simply mastered with somewhat apply. On this complete information, we are going to give you step-by-step directions, useful suggestions, and insightful tips to make sure a profitable machine binding expertise.
The fantastic thing about machine binding lies in its versatility. Whether or not you favor a conventional straight sew, a blanket sew, or an ornamental sew, you possibly can simply customise the binding to match your quilt’s fashion. It’s also a time-saving approach in comparison with hand binding, permitting you to finish your quilt extra shortly and effectively. Furthermore, machine binding supplies a sturdy and safe end that may stand the check of time, making certain that your quilt stays a cherished heirloom for generations to return.
Earlier than embarking on the machine binding course of, nevertheless, it’s essential to make sure that the quilt is correctly ready. The sides must be trimmed evenly, and the quilt prime, batting, and backing must be securely layered and basted collectively. This may create a steady basis for the binding and stop puckering or distortion. As soon as the quilt is correctly ready, you possibly can proceed with the machine binding course of, following the detailed directions within the subsequent sections of this information. By adhering to the methods and suggestions outlined on this article, you’ll uncover that machine binding is a rewarding and satisfying strategy to full your quilt, including an expert contact and defending your handiwork for years to return.
Choosing the Proper Material
When selecting the proper material in your quilt binding, maintain the next concerns in thoughts:
**Weight and Sturdiness:** The material must be light-weight and straightforward to deal with, but sturdy sufficient to resist the wear and tear and tear of use. Think about materials like cotton, cotton blends, or light- to medium-weight canvas.
**Colour and Sample:** The binding ought to complement the quilt’s total design. Select a cloth that coordinates with the quilt’s colours and patterns, or go for a contrasting colour to create a extra putting impact.
**Drape and End:** The material ought to drape properly across the quilt’s edges with out showing cumbersome or stiff. Delicate, drapey materials like silk, voile, or light-weight linen can create a fragile, elegant end.
**Matching and Grading:** Guarantee the material has sufficient width to chop the binding strips with out piecing. Think about the quilt’s dimension and the specified binding width to find out the mandatory material yardage.
**Here is a desk summarizing the important thing material concerns:**
| Material Attribute | Issues |
|---|---|
| Weight and Sturdiness | Light-weight, sturdy (e.g., cotton, cotton blends, canvas) |
| Colour and Sample | Enhances or contrasts the quilt’s design |
| Drape and End | Delicate, drapey (e.g., silk, voile, linen) |
| Matching and Grading | Sufficient width to chop binding strips with out piecing |
Getting ready the Batting
The selection of batting can have a major influence on the general really feel, heat, and drape of your quilt. When choosing batting, think about elements equivalent to fiber content material, thickness, and loft. Experiment with differing types to search out the one which most accurately fits your required consequence.
To make sure the batting is even, clean, and freed from wrinkles, observe these steps:
1. Lay Out the Batting
Unfold the batting flat on a big floor. Make sure the selvage edges of the batting align with the perimeters of the backing material.
2. Press the Batting
Use a heat iron and a urgent fabric to softly press the batting. This may take away any wrinkles and assist it lie flat. Take care to not over-press, as it may possibly flatten the loft of the batting.
| Batting Fiber Content material | Traits |
|---|---|
| Cotton | Pure, breathable, sturdy; supplies good insulation |
| Polyester | Artificial, hypoallergenic, machine-washable; retains loft properly |
| Wool | Pure, heat, moisture-wicking; will be costly |
| Bamboo | Sustainable, breathable, anti-bacterial; much like cotton in really feel |
| Tencel | Pure, delicate, absorbent; good various to silk or cotton |
Layering and Pinning the Quilt
As soon as the quilt prime and backing are full, it is time to layer and pin them collectively. This step ensures that the layers are aligned and keep in place throughout quilting.
Layering the Quilt
Place the quilt prime on a flat floor, proper aspect up. Heart the quilt backing on prime of the quilt prime, proper aspect down.
Pinning the Quilt
Utilizing sharp pins, pin the layers collectively across the edges, ranging from the middle and dealing your method outward. Insert the pins perpendicular to the quilt, making certain they undergo all three layers.
Pinning Approach:
| Pinning Type | Description |
|---|---|
| Vertical | Pins are inserted perpendicular to the quilt, making a straight line. |
| Diagonal | Pins are inserted at a diagonal angle, making a safe maintain. |
| Crosswise | Pins are inserted in a cross form, offering further stability. |
Pin Placement:
- Area pins roughly 2-3 inches aside.
- Pin across the perimeter of the quilt, in addition to in any areas the place there are sharp angles or curves.
- Keep away from pinning by any gildings or ornamental components.
Making certain the layers are correctly pinned will assist stop shifting and puckering throughout quilting.
Selecting the Machine Sew
Choosing the suitable machine sew for binding your quilt is essential. Think about the next elements:
Thread Depend and Weight
Select a thread rely that matches the material weight of your quilt. A better thread rely supplies better sturdiness for heavier materials.
Sew Size
Modify the sew size to the scale of your quilt and the specified binding width. An extended sew size creates a extra informal look, whereas a shorter sew size gives higher precision.
Sew Sample
There are numerous sew patterns appropriate for machine binding. Here is a desk summarizing the commonest choices:
| Sew Sample | Description |
|---|---|
| Straight Sew | A easy and safe sew that’s simple to manage. |
| Zigzag Sew | Gives further power and suppleness, stopping the binding from unraveling. |
| Blind Hem Sew | Create an invisible end by concealing the sew line on the entrance of the quilt. |
Needle Sort
Use a pointy needle designed for quilting. Think about a denim or leather-based needle for thicker materials to stop needle breakage.
Setting the Machine Stress
Making certain correct machine rigidity is essential for optimum binding outcomes. Here is a step-by-step information to setting the strain:
1. Thread the Machine
Thread your stitching machine with the thread you will use for binding. Wind a bobbin with the identical thread.
2. Set the Stress Dial
Find the strain dial in your stitching machine. For quilting tasks, a rigidity setting of 4-5 is usually really helpful.
3. Create Check Stitches
Sew a number of check stitches on a scrap material. The stitches ought to neither be too free nor too tight.
– If the stitches are too free, improve the strain by turning the dial clockwise.
– If the stitches are too tight, lower the strain by turning the dial counterclockwise.
4. Check the Binding
As soon as the check stitches look good, connect the binding to a quilt sandwich. Sew a brief part and test the strain. If the binding is puckering or pulling, modify the strain accordingly.
5. Positive-Tuning the Stress
To attain essentially the most exact rigidity, think about the next elements:
| Material Sort | Stress Setting |
|---|---|
| Quilting Cotton | 4-5 |
| Flannel or Minky | 3-4 |
| Silk or Satin | 2-3 |
| Heavyweight Canvas | 5-6 |
Do not forget that these are pointers, and you might want to regulate the strain barely primarily based in your particular material and machine.
Binding the Quilt
Step 1: Fold the Binding in Half
Align the uncooked edges of the binding and fold it in half lengthwise, with the incorrect sides collectively. Iron the crease to safe the fold.
Step 2: Pin the Binding to the Quilt
Beginning on the heart of 1 edge, pin the folded binding to the sting of the quilt, proper sides collectively. The uncooked fringe of the binding must be aligned with the uncooked fringe of the quilt.
Step 3: Sew the Binding
Utilizing a 1/4-inch seam allowance, sew alongside the folded fringe of the binding, catching each the binding and the quilt.
Step 4: Fold the Binding Over and Pin
After getting sewn across the quilt, fold the binding over the uncooked fringe of the quilt and pin it in place alongside the again.
Step 5: Sew the Binding to the Again
Utilizing a 1/8-inch seam allowance, sew across the quilt as soon as extra to safe the binding to the again. Begin and cease a number of inches from the place you started to depart a niche for turning.
Step 6: Flip and Topstitch the Binding
To attain a clear {and professional} end, flip the quilt proper aspect out by the hole you left. Tuck the uncooked edges of the binding inside and pin them in place. Utilizing a straight sew, topstitch across the total quilt, catching each the binding and the quilt. This may safe the binding and provides it a sophisticated look.
| Binding Width | Completed Width |
|---|---|
| 2 1/4 inches | 1/2 inch |
| 3 inches | 1 inch |
| 3 1/2 inches | 1 1/2 inches |
Ending the Binding
7. Mitering the Corners
For a professional-looking end, miter the corners of the binding earlier than stitching it down. Here is a step-by-step information:
– Measure and mark 1 1/2 inches from the nook on each edges of the binding.
– Fold the binding in half on the mark and crease.
– Convey the 2 uncooked edges of the binding collectively to type a 45-degree angle.
– Fold the opposite finish of the binding over the mitered nook and match the uncooked edges.
– Press the nook flat and safe it with Marvel Clips or pins to maintain it in place.
Tip: For simpler mitering, use a miter ruler or a mitering software particularly designed to information you in chopping and folding the binding.
– Repeat this course of for the remaining three corners.
| Nook | Steps |
|---|---|
| 1 | Measure and mark 1 1/2 inches from the nook on each edges of the binding. |
| 2 | Fold the binding in half on the mark and crease. |
| 3 | Convey the 2 uncooked edges of the binding collectively to type a 45-degree angle. |
| 4 | Fold the opposite finish of the binding over the mitered nook and match the uncooked edges. |
| 5 | Press the nook flat and safe it with Marvel Clips or pins. |
Machine Binding Suggestions
Utilizing a Binding Foot
A binding foot makes it simple to stitch binding in your quilt. It has a small information that helps you retain the binding straight and even.
Selecting the Proper Needle
Use a pointy needle that’s the proper dimension in your material. A too-small needle will trigger the material to pucker, whereas a too-large needle will create holes.
Stitching Size
Use a sew size of two.5 to three.0 mm. This may create a robust, safe sew that won’t come undone.
Urgent
Press the binding as you sew it to assist it lay flat. Urgent may even assist to stop the binding from puckering.
Mitering Corners
While you come to a nook, you have to to miter the binding. This implies folding the binding at a 45-degree angle and stitching it down. Listed here are step-by-step directions on methods to miter a nook:
- Fold the binding in half at a 45-degree angle, with the folded edge going through the quilt.
- Sew the binding down, beginning on the nook and stitching to the sting of the quilt.
- Fold the binding over the sting of the quilt and stitch it down, beginning on the nook and stitching to the sting of the quilt.
- Trim the surplus binding on the nook.
Including a Hanging Sleeve
If you wish to add a dangling sleeve to your quilt, you are able to do so earlier than you bind it. Listed here are step-by-step directions on methods to add a dangling sleeve:
- Lower two items of material which can be 4 inches broad and the size of your quilt.
- Fold each bit of material in half lengthwise and press.
- Open up one piece of material and lay it on prime of the quilt, with the uncooked edges aligned with the highest fringe of the quilt.
- Fold the opposite piece of material over the primary piece and press.
- Sew across the edges of the hanging sleeve, leaving a small opening for turning.
- Flip the hanging sleeve proper aspect out and press.
- Topstitch across the edges of the hanging sleeve.
Ending the Binding
After getting sewn the binding across the total quilt, you have to to complete it. Listed here are step-by-step directions on methods to end the binding:
| Step | Directions |
|---|---|
| 1 | Fold the binding over the sting of the quilt and stitch it down, beginning on the nook and stitching to the sting of the quilt. |
| 2 | Trim the surplus binding on the nook. |
| 3 | Repeat steps 1 and a couple of for the remaining three corners. |
| 4 | Press the binding. |
| 5 | Topstitch across the edges of the binding. |
Troubleshooting Frequent Issues
Needle Breaking
Use a pointy needle particularly designed for quilting. Make sure the needle is inserted appropriately and is the suitable dimension for the material and thread. Think about using a bigger needle dimension or a heavier thread weight.
puckering
Guarantee the material is taught as you sew. Modify the strain settings in your machine, growing the highest thread rigidity or lowering the bobbin rigidity. Use a strolling foot or a sew with a better sew density, equivalent to a straight sew or a zigzag sew.
Stress Issues
Modify the highest thread rigidity or bobbin rigidity to create even stitches. If the highest thread is simply too free, tighten the highest rigidity; if the bobbin thread is simply too free, tighten the bobbin rigidity.
Binding Not Flat
Make sure the binding is evenly distributed across the quilt edge. Modify the strain or sew size to stop the binding from puckering or gathering. Think about using a double-fold binding approach for a safer and even end.
Uneven Stitching
Verify the needle and rigidity settings. Make sure that the needle is sharp and the strain is appropriate. Use a strolling foot or a sew with a better sew density to stop skipping stitches.
Material Fraying
Use a pointy needle and high-quality thread designed for quilting. Modify the sew size or rigidity to stop the material from fraying. Think about using a backing material or interfacing to bolster the quilt edge.
Binding Not Stays Safe
Make sure the binding is folded over the uncooked fringe of the quilt by not less than 1/4 inch and stitched securely. Think about using machine quilting methods, equivalent to mitered corners or machine binding, for a sturdy {and professional} end.
Quilt Not Sq.
Measure the quilt rigorously earlier than binding and trim any uneven edges. Use a quilting sq. or ruler to make sure the binding is evenly distributed across the quilt.
Binding Tucks In
Improve the sew size or modify the strain to stop the binding from tucking in. Think about using a strolling foot or a sew with a better sew density to make sure safe stitching.
Machine Quilting: A Information to Binding Your Masterpiece
As soon as you’ve got accomplished the quilting course of, the ultimate step is to bind the quilt, giving it an expert end and a contact of non-public fashion.
Supplies You will Want:
- Binding material
- Backing material
- Thread
- Measuring tape
- Rotary cutter or scissors
- Stitching machine
- Iron and ironing board
Step-by-Step Directions:
1.
Put together the Binding Strips
Lower strips of binding material which can be 2.5 inches broad. The size of the strips will depend upon the scale of your quilt.
2.
Sew the Binding Strips Collectively
Sew the binding strips collectively end-to-end, utilizing a diagonal seam allowance for a seamless look.
3.
Connect the Binding to the Quilt
Fold the binding strip in half and pin it to the sting of the quilt, aligning the uncooked edges. Sew alongside the folded fringe of the binding.
4.
Trim the Extra Binding
Trim any extra binding from the corners of the quilt.
5.
Fold the Binding to the Again
Fold the binding over to the again of the quilt and pin it in place.
6.
Sew the Binding to the Again
Sew alongside the folded fringe of the binding, securing it to the again of the quilt.
7.
Miter the Corners
To create a neat and tidy end on the corners, miter the binding by folding it diagonally and stitching it in place.
8.
Safe the Binding
Hand-stitch or machine-stitch the ends of the binding collectively to safe it.
9.
Press the Quilt
Press the quilt to flatten the binding and provides it an expert look.
Take pleasure in Your Masterpiece
Congratulations! You have efficiently certain your quilt utilizing a machine. Now you possibly can benefit from the magnificence and luxury of your handmade masterpiece for years to return.
Methods to Bind a Quilt by Machine
Binding a quilt by machine is a vital ending step that secures the perimeters and provides a sophisticated contact to your mission. Here is a step-by-step information that will help you obtain a professional-looking bind:
- Put together the Quilt: Trim any extra batting or material across the edges of the quilt to make sure a clear and even end.
- Create the Binding Strips: Lower bias strips of material measuring 2 1/2 inches broad. The size of every strip will differ relying on the scale of your quilt. Be a part of the strips collectively utilizing a diagonal seam to make a steady binding.
- Connect the Binding: Pin the binding across the edges of the quilt, aligning the uncooked fringe of the binding with the uncooked fringe of the quilt prime. Machine sew across the quilt, near the fold of the binding, utilizing a slim zigzag sew or a straight sew with a small sew size.
- Miter the Corners: To create a neat end on the corners, fold the binding diagonally at a 45-degree angle and trim the surplus. Align the folded fringe of the binding with the adjoining edge and sew it down.
- Machine Fold the Binding: As soon as the binding is hooked up, fold it over to the again of the quilt and machine sew alongside the sting of the quilt, near the earlier stitching. This may safe the binding and provides it an expert look.
Folks Additionally Ask
How do you bind a quilt and not using a binding software?
You may bind a quilt and not using a binding software by utilizing a easy fold-over approach. Pin the binding across the edges of the quilt and fold it over to the again. Machine sew alongside the sting of the quilt, near the fold of the binding.
What’s one of the best ways to affix quilt binding strips?
Bias Becoming a member of:
Lower bias strips of material and be a part of them collectively utilizing a diagonal seam. This technique prevents fraying and creates a extra skilled end.
Straight Becoming a member of:
Lower straight strips of material and be a part of them along with a straight seam. Align the perimeters rigorously to make sure a clean joint.
How do you hand bind a quilt?
Hand binding a quilt entails stitching the binding across the edges of the quilt by hand. This technique offers a extra conventional and complicated look. Use a small needle and powerful thread to safe the binding.
