The Greenworks 21362 is a robust and environment friendly string trimmer that’s excellent for tackling robust weeds and grass. It encompasses a bump head that makes it simple to advance the road, and a variable velocity set off that permits you to management the facility output. The 21362 additionally comes with a shoulder strap for added consolation throughout use.
For those who’re in search of a string trimmer that’s highly effective, environment friendly, and simple to make use of, the Greenworks 21362 is a superb possibility. It is excellent for tackling robust weeds and grass, and it comes with various options that make it a pleasure to make use of.
On this article, we’ll take a more in-depth take a look at the Greenworks 21362, and we’ll present you how you can bump the pinnacle. We’ll additionally present some recommendations on how you can use the trimmer safely and successfully.
Security Precautions for Bumping the Head
Earlier than trying to bump the pinnacle in your Greenworks 21362 trimmer, it’s essential to prioritize security. Just a few important precautions embody:
1. Put on Acceptable Private Protecting Gear (PPE)
To attenuate the danger of harm, it’s paramount to don the next protecting gear previous to commencing work:
- Security glasses: Defend your eyes from flying particles or trimmer line fragments.
- Earplugs or headphones: Forestall extreme noise ranges from damaging your listening to.
- Gloves: Shield your palms from potential cuts, scrapes, or vibrations.
- Lengthy pants and sleeves: Cowl your pores and skin to keep away from contact with vegetation or sharp objects.
- Footwear with non-slip soles: Guarantee stability and stop falls whereas working the trimmer.
Moreover, all the time examine the trimmer and its line earlier than every use to detect any injury or wear-and-tear. Report any points to your supervisor or a professional technician instantly.
Figuring out the Bump Head Function
The Greenworks 21362 string trimmer encompasses a bump head, which lets you simply advance the trimmer line by merely tapping the pinnacle on the bottom whereas the trimmer is working. This function eliminates the necessity to cease and manually feed the road, making it extra handy and environment friendly to make use of.
Finding the Bump Head
The bump head is situated on the finish of the trimmer shaft, the place the trimmer line exits. It’s sometimes made from a sturdy plastic materials and has a spring-loaded mechanism that enables the road to be superior when the pinnacle is tapped.
Working the Bump Head
To advance the trimmer line utilizing the bump head, comply with these steps:
- Be certain that the trimmer is working at full velocity.
- Maintain the trimmer upright and gently faucet the bump head on the bottom.
- The spring-loaded mechanism will mechanically advance the trimmer line by a small quantity.
- Repeat steps 2-3 as crucial till the specified line size is achieved.
Notice: It is very important faucet the bump head gently to keep away from damaging the mechanism. Extreme pressure could cause the spring to interrupt or the bump head to change into unfastened.
Getting ready the Trimmer for Head Bumping
Selecting the Proper Trimmer Line
The diameter of the trimmer line is important for correct head bumping. Use a 0.080-inch line for optimum efficiency and sturdiness. Keep away from utilizing thicker strains as they could scale back the trimmer’s effectivity and improve the danger of head bouncing.
Inspecting and Cleansing the Trimmer Head
Earlier than head bumping, be certain the trimmer head is clear and freed from particles. Examine the pinnacle for any injury or put on. Use a brush or compressed air to take away any collected grass or grime. Examine that the trimmer line is correctly put in and has the suitable size for head bumping.
Adjusting the Trimmer Head and Bumping Launch
To organize the trimmer for head bumping, regulate the tapping pressure to fit your preferences and floor situations. Most trimmers include a bump cap and bumper spring that may be adjusted to regulate how simply the trimmer line releases if you faucet the pinnacle on the bottom. A firmer setting would require extra pressure to launch the road, whereas a looser setting will launch the road extra simply.
| Adjustment Possibility | Description |
|---|---|
| Bump Cap | Adjusts the strain on the bump cap, making it simpler or more durable to launch the road. |
| Bumper Spring | Adjusts the strain of the spring that releases the road when the pinnacle faucets the bottom. |
By correctly adjusting these settings, you possibly can optimize the trimmer’s efficiency for head bumping and obtain a constant chopping top.
Choosing the Acceptable Bump Head Line
Greenworks 21362 bump head takes 0.095 inches to 0.105 inches strains. The proper line diameter to make use of will depend on the specified chopping thickness. Thicker strains will minimize by means of thicker vegetation, whereas thinner strains will present a cleaner minimize for finer grass. It is very important select the right line diameter for the job at hand to make sure optimum efficiency.
Line Diameter Suggestions
The next desk offers beneficial line diameters for various chopping duties:
| Chopping Job | Line Diameter (inches) |
|---|---|
| Mild trimming | 0.095 |
| Medium trimming | 0.100 |
| Heavy trimming | 0.105 |
Putting in the Bump Head Line
The Greenworks 21362 bump head line is straightforward to put in and substitute. Observe these easy steps:
1. Take away the previous bump head line
Unscrew the knob on the facet of the trimmer head and take away the previous line. Watch out to not lose the spring that’s situated inside the pinnacle.
2. Insert the brand new bump head line
Thread the brand new line by means of the opening within the heart of the pinnacle and pull it out till there may be equal size on each side.
3. Wind the road across the spool
Wrap the road across the spool in a clockwise path. Ensure that the road is tight and there aren’t any kinks or tangles.
4. Insert the spool into the pinnacle
Place the spool into the pinnacle and make it possible for the road is popping out of the opening within the backside of the pinnacle.
5. Modify the road size
The road size might be adjusted by turning the knob on the facet of the pinnacle. Flip the knob clockwise to shorten the road and counterclockwise to elongate the road. The optimum line size is when the guidelines of the road lengthen about 2 inches past the sting of the trimmer head.
| Step | Description |
|---|---|
| 1 | Take away the previous bump head line. |
| 2 | Insert the brand new bump head line. |
| 3 | Wind the road across the spool. |
| 4 | Insert the spool into the pinnacle. |
| 5 | Modify the road size. |
Adjusting the Bump Head Line Size
To regulate the size of the bump head line, comply with these steps:
1. Take away the bump head.
Grip the bump head firmly and pull it straight all the way down to detach it from the trimmer.
2. Loosen the adjustment knob.
Find the adjustment knob on the facet of the bump head. Flip it counterclockwise to loosen it.
3. Modify the road size.
Pull out the road to the specified size. The beneficial size for the Greenworks 21362 is 12-14 inches.
4. Wind the road onto the spool.
Wrap the road across the spool in a clockwise path. Hold the road taut whereas winding.
5. Insert the bump head.
Align the bump head with the shaft and push it upward till it clicks into place.
6. Tighten the adjustment knob and retighten the bump head.
Flip the adjustment knob clockwise to tighten it and safe the road size. Reattach the bump head to the trimmer by pushing it upward till it clicks securely.
| Advisable line size for Greenworks 21362 | 12-14 inches |
|---|
Troubleshooting Bump Head Points
1. String Not Feeding Robotically
Make sure the bump head is correctly aligned with the trimmer hub. Examine if the string is wound appropriately and that there aren’t any blockages.
2. Bumping Not Activating
Examine the bump cap and actuator for injury. Make sure the cap is securely connected and the actuator is functioning correctly.
3. String Breaking or Tangling
Use the right gauge and sort of trimmer string to your mannequin. Examine for any obstructions within the string path that could possibly be inflicting breakage or tangling.
4. Trimmer Head Overheating
Keep away from utilizing the trimmer repeatedly for prolonged durations. Enable the pinnacle to chill down intermittently to forestall injury.
5. Lack of Trimming Energy
Examine the trimmer’s battery degree or energy wire connection. Make sure the drive shaft is rotating freely and never obstructed.
6. Head Caught in Prolonged Place
Press and maintain the bump cap firmly till the pinnacle retracts. If it would not, seek the advice of a professional technician.
7. Bump Head Advance Mechanism Troubleshooting
| Subject | Attainable Causes | Options |
|---|---|---|
| Mechanism not advancing | – Jammed spring – Damaged pawls – Worn gears |
– Exchange jammed spring – Restore or substitute damaged pawls – Exchange worn gears |
| Mechanism advancing too far | – Unfastened rigidity spring – Worn or broken pawls |
– Tighten rigidity spring – Exchange worn or broken pawls |
| Mechanism advancing intermittently | – Soiled or broken pawls – Obstructed spring |
– Clear or substitute soiled or broken pawls – Clear obstructed spring |
Upkeep Ideas for the Bump Head
1. Common Cleansing
To keep up the height efficiency of your bump head, common cleansing is essential. Take away any grass clippings, grime, or particles that will accumulate on the pinnacle after every use. Use a hose or a brush to softly clear the pinnacle and take away any obstructions.
2. Lubrication
Lubricating the bump head will guarantee clean operation and stop jamming. Apply a small quantity of lubricant to the inner mechanisms of the pinnacle, particularly round gears and transferring components. Use a lightweight oil or grease particularly designed for out of doors energy tools.
3. Line Substitute
When the trimmer line wears down, it is necessary to exchange it promptly. Use a high-quality trimmer line that’s suitable along with your bump head. Seek the advice of the producer’s directions for the correct measurement and sort of line.
4. Spool Inspection
Periodically examine the spool that holds the trimmer line. Be certain that it isn’t broken or cracked and that it winds and unwinds easily. If crucial, substitute the spool with a brand new one.
5. Tightening Unfastened Components
Over time, the screws and bolts on the bump head might loosen on account of vibrations. Recurrently examine and tighten any unfastened components to take care of the integrity and stability of the pinnacle.
6. Defend Upkeep
The defend on the bump head protects the operator from flying particles. Examine the defend recurrently for any cracks or injury. Exchange the defend if crucial.
7. Troubleshooting Jamming
If the bump head is jammed, flip off the trimmer and disconnect it from the facility supply. Take away the pinnacle from the trimmer and examine for any obstructions or tangles within the line. Clear any particles and wind the road again onto the spool correctly.
8. Troubleshooting Uneven Chopping
Uneven chopping might be brought on by a number of components. Examine the next:
– **Line Size:** Be certain that the trimmer line will not be too lengthy or too quick.
– **Line Rigidity:** Modify the road rigidity by turning the dial on the bump head.
– **Spool Alignment:** Ensure that the spool is aligned appropriately inside the head.
– **Blade Stability:** If the blade is bent or broken, it could trigger uneven chopping. Exchange the blade if crucial.
– **Trimming Approach:** Use correct trimming methods to keep away from scalping or uneven chopping.
– **Head Angle:** Modify the angle of the bump head to make sure that it’s parallel to the bottom.
– **Trimming Velocity:** Trim at a reasonable velocity to permit the trimmer to chop cleanly and evenly.
Various Strategies for Feeding Line
Along with bump feeding, there are a number of various strategies for feeding line into the Greenworks 21362:
Guide Feeding
To feed line manually, merely flip off the trimmer, unplug it from the facility supply, and take away the bump cap. Thread the road by means of the trimmer head and pull it out by means of the holes within the chopping blade. Modify the road size to the specified chopping top and substitute the bump cap.
Auto Feed
Some fashions of the Greenworks 21362 function an auto feed system that mechanically advances the road as it’s used. To interact the auto feed, merely begin the trimmer and maintain it towards the bottom. The road will mechanically feed out as wanted.
Faucet Feed
Faucet feed is one other widespread methodology of feeding line right into a trimmer. To make use of this methodology, merely faucet the trimmer head firmly on the bottom. The influence will trigger the road to advance mechanically.
Prolonged Info on Faucet Feed
Faucet feed is a handy and environment friendly strategy to feed line right into a trimmer. To make use of this methodology successfully, comply with these steps:
1. Flip off the trimmer and unplug it from the facility supply.
2. Take away the bump cap or cowl from the trimmer head.
3. Thread the road by means of the trimmer head and pull it out by means of the holes within the chopping blade.
4. Modify the road size to the specified chopping top.
5. Exchange the bump cap or cowl.
6. Maintain the trimmer calmly towards the bottom.
7. Faucet the trimmer head firmly on the bottom a number of occasions.
8. The road will advance mechanically as wanted.
The variety of faucets required to advance the road might range relying on the mannequin of trimmer and the thickness of the road. Experiment with totally different faucet strengths to seek out the optimum setting to your specific trimmer.
Optimizing Bump Head Efficiency
Greenworks 21362 Garden Edger is supplied with a flexible bump head that effortlessly releases trimming line. Whether or not you are a seasoned professional or a novice, understanding how you can bump head successfully can considerably enhance your trimming expertise.
1. Modify Line Size:
Earlier than beginning, make sure the trimming line is prolonged to the specified size. Optimum line size is usually between 6-8 inches.
2. Holding the Edger:
Firmly grip the edger with each palms. Place the bump head dealing with down over the world you want to trim.
3. Have interaction the Velocity Management Set off:
Press and maintain the velocity management set off to provoke the motor.
4. Faucet the Bump Head:
Gently faucet the bump head towards the bottom whereas sustaining downward strain.
5. Proceed Tapping:
Repeat the tapping movement till the trimming line advances and contacts the bottom.
6. Launch Stress:
As soon as the road is prolonged, launch downward strain on the bump head.
7. Examine Line Situation:
Recurrently examine the trimming line for injury or put on. Exchange the road if crucial.
8. Clear the Bump Head:
Sometimes take away any particles or grass clippings that will accumulate across the bump head.
9. Lubricate Recurrently:
Periodically apply a number of drops of oil to the bump head mechanism to make sure clean operation.
10. Troubleshooting:
| Downside | Resolution |
|---|---|
| Trimmer line advances an excessive amount of | Examine the spool rigidity and regulate it if wanted |
| Trimmer line fails to advance | Exchange the trimmer line or examine for particles |
| Bump head is worn or broken | Exchange the bump head |
Greenworks 21362 How To Bump Head
The Greenworks 21362 is a robust electrical string trimmer that’s preferrred for trimming massive areas of grass. Nonetheless, if you’re new to utilizing a string trimmer, you might be questioning how you can bump the pinnacle. Bumping the pinnacle is important to launch new string into the trimmer head. Listed here are the steps on how you can bump the pinnacle on the Greenworks 21362:
- Be sure that the trimmer is turned off and unplugged.
- Maintain the trimmer the other way up in order that the trimmer head is dealing with the bottom.
- Find the bump knob on the facet of the trimmer head.
- Press the bump knob towards the bottom a number of occasions till new string is launched.
- Flip the trimmer again over and begin trimming.
Folks Additionally Ask About Greenworks 21362 How To Bump Head
How usually ought to I bump the pinnacle on my Greenworks 21362?
It is best to bump the pinnacle in your Greenworks 21362 everytime you discover that the string is getting quick. It will assist to make sure that you’ve got sufficient string to trim your grass successfully.
How do I do know when the string is just too quick on my Greenworks 21362?
You’ll know when the string is just too quick in your Greenworks 21362 when the trimmer begins to bathroom down or stall. You may additionally discover that the string will not be chopping the grass in addition to it used to.
The place can I purchase substitute string for my Greenworks 21362?
You should purchase substitute string to your Greenworks 21362 at most {hardware} shops or on-line retailers.
