Disassembling the Samsung Galaxy Buds 2 case is usually a daunting activity, particularly should you’re not accustomed to the intricacies of digital gadgets. Nevertheless, with the proper instruments and just a little little bit of endurance, it is solely potential to pry it aside with out inflicting any harm. Whether or not you are trying to exchange a defective battery, repair a unfastened hinge, or just fulfill your curiosity, this complete information will give you the step-by-step directions you might want to efficiently disassemble your Galaxy Buds 2 case.
Earlier than you start, it is important to assemble the mandatory instruments. You will want a small Phillips head screwdriver, a skinny plastic pry device, and a pair of tweezers. It is also a good suggestion to have a clear work floor and a tender material to guard the case from scratches. After you have all the pieces you want, you may proceed with the disassembly course of. Start by eradicating the 2 screws positioned on the underside of the case. These screws maintain the highest and backside halves of the case collectively. As soon as the screws are eliminated, rigorously pry the 2 halves aside utilizing the plastic pry device. Be mild and keep away from utilizing extreme drive, as you do not need to harm the case.
As soon as the case is open, you will have entry to the inner elements. The battery is positioned within the heart of the case, and it is held in place by two small screws. Take away the screws and punctiliously disconnect the battery from the motherboard. Subsequent, find the hinge that connects the highest and backside halves of the case. The hinge is held in place by two small screws. Take away the screws and punctiliously detach the hinge. As soon as the hinge is eliminated, you’ll utterly disassemble the case. Make sure you maintain the entire screws and elements organized, as you will want them while you reassemble the case.
Supplies and Instruments Required
To efficiently disassemble the Galaxy Buds 2 case, you will want the next supplies and instruments:
**Supplies:**
- Galaxy Buds 2 case
- Tender material or microfiber
- Isopropyl alcohol (really useful 91% or larger)
- Cotton swabs or lint-free wipes
- Precision screwdriver set (Phillips and Torx)
- Spudger or skinny plastic device
- Anti-static wrist strap (optionally available however really useful)
**Extra Instruments for Superior Disassembly:**
- Soldering iron and solder wire
- Multimeter or continuity tester
- ESD-safe work floor
- Microscope (optionally available)
| Instrument/Materials | Objective |
|---|---|
| Precision screwdriver set | Eradicating screws |
| Spudger or skinny plastic device | Prying open case elements |
| Anti-static wrist strap | Stopping electrostatic discharge |
Safely Unclip the Case
**Supplies Required:**
| Instrument | Description |
|---|---|
| Plastic Pry Instrument or Spudger | Skinny, flat device for separating case elements |
| Precision Screwdriver Set | Elective, for disassembling inside elements |
**Directions:**
- Insert Pry Instrument into Seam: Gently insert the pry device or spudger into the seam the place the highest and backside case halves meet. Begin from the hinge space and work your method across the perimeter.
- Apply Upward Stress: Apply mild upward strain whereas sliding the pry device alongside the seam. Keep away from making use of extreme drive to forestall harm.
- Unclip Latches: As you progress the pry device, you will really feel the case latches launch, permitting the highest half to separate from the underside half. Proceed sliding the device to unclip all latches.
- Separate Case Halves: As soon as all of the latches are launched, rigorously elevate the highest half of the case away from the underside half. Keep away from yanking or pulling on the case, as this might trigger harm.
Ideas
- Use a plastic pry device to reduce the chance of scratches or harm to the case.
- If the latches are tough to launch, apply a small quantity of penetrating oil or WD-40 to the seam and permit it to soak in for a couple of minutes earlier than trying to unclip the case.
- If the case has a rubber seal across the edges, watch out to not tear it when separating the case halves.
Take away the PCB Panel
The PCB panel is held in place by a couple of screws.
- Use a small Phillips head screwdriver to take away the screws.
- As soon as the screws are eliminated, rigorously pry up the PCB panel with a plastic spudger or your fingernails.
- Watch out to not harm the PCB panel or any of the elements on it.
Here’s a desk summarizing the steps for eradicating the PCB panel:
| Step | Description |
|---|---|
| 1 | Use a small Phillips head screwdriver to take away the screws. |
| 2 | Rigorously pry up the PCB panel with a plastic spudger or your fingernails. |
| 3 | Watch out to not harm the PCB panel or any of the elements on it. |
Detach the Charging Coil
The charging coil is positioned on the underside of the case and is held in place by a couple of clips. To detach the charging coil, comply with these steps:
1. Insert a plastic spudger or pry device into the seam between the case and the charging coil.
2. Rigorously pry the charging coil unfastened from the case.
3. Disconnect the charging coil from the motherboard.
4. Take away the charging coil from the case.
| Charging coil location | Tools needed | Estimated time |
|---|---|---|
| Backside of the case | Plastic spudger or pry device | 5 minutes |
As soon as the charging coil has been indifferent, you may proceed to disassemble the remainder of the case.
Disconnect the Battery
After you have eliminated the battery connector, the battery will probably be disconnected from the motherboard. Now you can take away the battery from the case.
To take away the battery, gently pry it up with a spudger. Watch out to not harm the battery or the case.
As soon as the battery is eliminated, you may get rid of it correctly. Most electronics shops will recycle batteries without cost.
Listed here are some extra suggestions for disconnecting the battery:
| Tip | Description |
|---|---|
| Use a spudger or different plastic device to disconnect the battery connector. | This can assist stop harm to the battery or the motherboard. |
| Watch out to not short-circuit the battery. | This might trigger a fireplace or explosion. |
| Eliminate the battery correctly. | Most electronics shops will recycle batteries without cost. |
Take away the Hinges
The hinges are held in place by two screws. You will want a Phillips #00 screwdriver to take away them.
Find the screws on the again of the case. They’re positioned on both aspect of the hinge.
Unscrew the screws. Watch out to not lose them.
As soon as the screws are eliminated, you may elevate the hinges off of the case.
Extra Particulars
* The screws are very small, so it is very important use a screwdriver that’s the right dimension.
* It’s also vital to watch out to not overtighten the screws while you reassemble the case.
* In case you are having hassle eradicating the hinges, you may attempt utilizing a pair of needle-nose pliers to grip the hinges and pull them off.
| Screw Dimension | Screw Location |
|---|---|
| Phillips #00 | Again of the case, on both aspect of the hinge |
Extract the Magnets
To extract the magnets, you will want a skinny, flat object like a spudger or dental choose.
1. Insert the thing into the small hole between the case’s prime and backside halves, close to one of many corners.
2. Gently pry aside the case, ranging from the nook and dealing your method across the perimeter.
3. As soon as the case is open, use the thing to rigorously take away the magnets from their slots.
4. There are two magnets on either side of the case, totaling 4 magnets in all.
5. Watch out to not lose the magnets, as they’re small and straightforward to misplace.
6. As soon as all of the magnets are eliminated, you may proceed to the subsequent step of disassembly.
| Magnet Particulars |
|---|
| Form: Rectangle |
| Dimension: 2.5mm x 4.5mm |
| Materials: Neodymium |
| Polarity: Bipolar |
Cleansing and Inspection
1. Take away the ear suggestions
Begin by eradicating the ear suggestions from the earbuds. This can make it simpler to entry the charging case for cleansing.
2. Clear the charging contacts
Use a cotton swab dipped in rubbing alcohol to wash the charging contacts on the earbuds and within the charging case. This can assist stop any charging points.
3. Clear the mesh grills
Use a soft-bristled brush to wash the mesh grills on the earbuds and within the charging case. This can assist take away any filth or particles that might block the sound.
4. Examine the earbuds
Take a detailed have a look at the earbuds for any harm. Verify for cracks, dents, or another indicators of damage and tear. For those who discover any harm, you could have to contact Samsung for a restore.
5. Examine the charging case
Take a detailed have a look at the charging case for any harm. Verify for cracks, dents, or another indicators of damage and tear. For those who discover any harm, you could have to contact Samsung for a restore.
6. Dry the earbuds and charging case
After you have cleaned the earbuds and charging case, be sure you dry them totally earlier than utilizing them once more. You should use a tender material or a hair dryer on a low setting to dry them.
7. Reassemble the earbuds
As soon as the earbuds and charging case are dry, reassemble the earbuds by attaching the ear suggestions.
8. Examine for any remaining points
As soon as the earbuds are reassembled, examine them for any remaining points. Check the sound, the match, and the charging performance. For those who discover any issues, you could have to contact Samsung for a restore.
Open the Case
To open the Galaxy Buds 2 case, find the small button on the again of the case and press it. The case will then pop open, revealing the earbuds.
Take away the Earbuds
To take away the earbuds from the case, gently pull them out. The earbuds are held in place by magnets, so they need to come out simply.
Clear the Earbuds and Case
To scrub the earbuds and case, use a tender material or brush to take away any filth or particles. You too can use a disinfectant wipe to wash the case.
Examine the Charging Contacts
The charging contacts on the earbuds and case are important for charging the earbuds. Examine the contacts for any filth or particles, and clear them if mandatory.
Substitute the Earbuds
To switch the earbuds within the case, merely insert them into the charging slots. The earbuds will probably be held in place by magnets, and they need to cost robotically.
Reassemble the Case
To reassemble the case, merely shut the lid till you hear a click on. The case is now reassembled and able to use.
Listed here are some extra suggestions for reassembling the case:
- Be sure that the earbuds are correctly inserted into the charging slots earlier than closing the case.
- Don’t drive the case closed. If the case doesn’t shut simply, verify to guarantee that the earbuds are correctly inserted.
- If the case nonetheless doesn’t shut simply, attempt cleansing the charging contacts on the earbuds and case.
Extra Data
The Galaxy Buds 2 case is designed to be waterproof, so it could stand up to being splashed with water. Nevertheless, it’s not waterproof, so it shouldn’t be submerged in water.
The Galaxy Buds 2 case can be used to cost a wi-fi charging pad. To cost the case wirelessly, merely place it on a wi-fi charging pad.
Listed here are some extra suggestions for utilizing the Galaxy Buds 2 case:
- Maintain the case clear to forestall filth and particles from build up on the charging contacts.
- Don’t expose the case to excessive warmth or chilly.
- If the case is broken, don’t use it. Contact Samsung for help.
Opening the Case
Rigorously insert a skinny object (corresponding to a plastic spudger or a guitar choose) into the small notch on the underside fringe of the case. Gently pry the 2 halves of the case aside, ranging from the underside. Work your method across the edges, utilizing the identical approach.
Eradicating the Battery
Find the battery contained in the case, and gently unplug the connector. Watch out to not harm the battery or the connector.
Disassembling the Case (1/2)
Find the 2 screws on the within of the case. Take away them utilizing a Phillips #00 screwdriver.
Disassembling the Case (2/2)
Rigorously elevate the highest half of the case off from the underside half. Watch out to not harm the wires or connectors.
Troubleshooting and Ideas
Case Will not Open
Be sure you’re utilizing a skinny, blunt object. A pointy object might harm the case.
Battery Will not Come Out
Verify and double-check that you’ve got unplugged the battery connector. If it nonetheless will not come out, apply mild strain to the battery whereas pulling on the connector.
Screws Stripped
If the screws develop into stripped, attempt utilizing a rubber band to get a greater grip. You too can attempt making use of a small quantity of tremendous glue to the screwdriver tip.
Wires Disconnected
For those who by accident disconnect any wires, seek advice from the supplied wiring diagram to reconnect them accurately.
Case Not Working After Reassembly
Verify that every one the elements are correctly linked. Additionally, be certain that the battery is totally charged.
Different Ideas
Put on anti-static gloves to forestall harm to digital elements.
Use a clear, well-lit workspace.
Take your time and do not drive something open.
For those who’re having hassle, do not hesitate to contact an expert.
| **Instrument** | **Objective** |
| Plastic spudger | Opening the case |
| Guitar choose | Opening the case |
| Phillips #00 screwdriver | Eradicating screws |
| Anti-static gloves | Stopping harm to elements |
Learn how to Take Aside Galaxy Buds 2 Case
To take aside the Galaxy Buds 2 case, you will want the next instruments:
- A small Phillips head screwdriver
- A pry device or a spudger
- A pair of tweezers
After you have the mandatory instruments, comply with these steps:
- Take away the 2 Phillips head screws from the underside of the case.
- Use the pry device or spudger to softly pry open the case.
- Use the tweezers to take away the battery from the case.
- Use the pry device or spudger to take away the circuit board from the case.
- Use the tweezers to take away the speaker from the case.
- Use the pry device or spudger to take away the microphone from the case.
- Use the tweezers to take away the charging port from the case.
- Use the pry device or spudger to take away the hinge from the case.
- Use the tweezers to take away the magnet from the case.
After you have eliminated the entire elements from the case, you may reassemble it by following the steps in reverse order.
Folks Additionally Ask
How do I clear my Galaxy case?
To scrub your Galaxy case, use a tender, damp material and wipe it down gently. You too can use a light cleaning soap resolution if mandatory. Keep away from utilizing harsh chemical compounds or abrasive cleaners, as these might harm the case.
How do I modify the battery in my Galaxy Buds 2 case?
To alter the battery in your Galaxy Buds 2 case, comply with these steps:
- Take away the 2 Phillips head screws from the underside of the case.
- Use the pry device or spudger to softly pry open the case.
- Use the tweezers to take away the battery from the case.
- Substitute the outdated battery with a brand new one.
- Reassemble the case by following the steps in reverse order.
How do I reset my Galaxy Buds 2 case?
To reset your Galaxy Buds 2 case, comply with these steps:
- Open the Galaxy Buds 2 case.
- Press and maintain the button on the again of the case for 10 seconds.
- The case will flash purple after which inexperienced to point that it has been reset.
