Changing your automobile battery is a comparatively easy job that may be accomplished in about half-hour. Nevertheless, it is necessary to comply with the proper steps to keep away from any harm to your automobile. On this article, we’ll stroll you thru the method of changing the battery in a 2020 Hyundai Kona.
Earlier than you start, you may want to collect a number of instruments: a brand new battery, a wrench, and a pair of gloves. You also needs to park your automobile in a secure location and switch off the engine. Upon getting your instruments and your automobile is ready, you’ll be able to start the substitute course of.
Step one is to find the battery. The battery within the 2020 Hyundai Kona is situated within the engine compartment, on the passenger aspect. As soon as you have situated the battery, you may must disconnect the unfavorable terminal. To do that, use the wrench to loosen the nut that is holding the terminal in place. As soon as the nut is free, you’ll be able to take away the terminal from the battery. Subsequent, you may must disconnect the constructive terminal. To do that, comply with the identical steps as you probably did for the unfavorable terminal.
Preparation and Security Precautions
Normal Preparation:
Earlier than making an attempt to interchange your Hyundai Kona’s battery, guarantee you may have the required instruments and supplies, together with a brand new battery, wrench, 10mm socket, and security glasses. Park the automobile on a flat, secure floor, and interact the parking brake to forestall it from rolling.
Security Precautions:
Battery substitute includes working with electrical elements that may trigger damage. Observe the next security precautions:
- Disconnect the unfavorable terminal first, then the constructive terminal. This prevents potential quick circuits and sparks.
- Put on security glasses to guard your eyes from battery acid and particles.
- Hold a fireplace extinguisher close by in case of an accident.
- Keep away from touching the battery terminals instantly with naked arms. Use gloves or a material.
Disconnecting the Adverse Terminal
The second step in changing your Kona’s automobile battery is to disconnect the unfavorable terminal. The unfavorable terminal is usually black and has a unfavorable (-) signal. To disconnect the unfavorable terminal, you have to a 10mm wrench or socket. Observe these steps to disconnect the unfavorable terminal safely:
Step 1: Find the Adverse Terminal
Open the hood of your Kona and find the battery. The unfavorable terminal is often situated on the left-hand aspect of the battery and is marked with a unfavorable (-) signal.
Step 2: Loosen the Adverse Terminal Nut
Utilizing a 10mm wrench or socket, loosen the nut that secures the unfavorable terminal to the battery. Don’t take away the nut utterly at this level.
Step 3: Carry the Adverse Terminal Off the Battery
As soon as the nut is free, elevate the unfavorable terminal straight up off the battery publish. Watch out to not contact the constructive terminal with the unfavorable terminal, as this might trigger a brief circuit.
Step 4: Examine the Adverse Terminal
Examine the unfavorable terminal for any harm or corrosion. If there may be any harm or corrosion, you have to to interchange the unfavorable terminal earlier than continuing.
| Software | Measurement |
|---|---|
| Wrench or socket | 10mm |
Eradicating the Battery Maintain-Down Clamp
The battery hold-down clamp is a metallic bracket that secures the battery in place. To take away it, you may want a 10mm socket wrench or a 10mm spanner.
1.Find the battery hold-down clamp. It is often situated on the highest of the battery, close to the terminals.
2.Loosen the bolts that maintain the clamp in place. Don’t take away the bolts utterly.
3.Carry the clamp off the battery.
4.Fastidiously elevate the battery out of the battery tray. Watch out to not drop the battery, as it’s heavy.
| Instruments you have to: | 10mm socket wrench or 10mm spanner |
| Estimated time: | 10 minutes |
| Problem stage: | Straightforward |
Lifting the Outdated Battery Out
Upon getting disconnected the terminals and loosened the hold-down bolts, it is time to elevate the previous battery out of the Kona. This is usually a bit tough, because the battery is heavy and could be awkward to deal with. Listed below are some suggestions for lifting the battery out safely:
1. Get a great grip and elevate along with your legs. Don’t bend over to elevate the battery, as this could put pressure in your again. As a substitute, squat down and grip the battery with each arms. Use your legs to elevate the battery up and out of the compartment.
2. Watch out to not drop the battery. This might harm the battery or your automobile. If you’re having hassle lifting the battery, ask for assist from a good friend or member of the family.
3. Place the previous battery in a secure place. Don’t depart it on the bottom, as this might create a hazard. You possibly can place the previous battery in a cardboard field or on a bit of wooden.
4. Get rid of the previous battery correctly. Batteries include hazardous supplies, so you will need to eliminate them correctly. You possibly can take your previous battery to an auto elements retailer or recycling middle.
5. **Security precautions whereas lifting the battery:**
| Security Measure | Purpose |
|---|---|
| Put on gloves and security glasses. | Battery acid could cause burns and eye harm. |
| Don’t smoke or use open flames close to the battery. | Batteries can produce hydrogen gasoline, which is flammable. |
| Keep away from contact along with your eyes or pores and skin. | Battery acid could cause irritation or burns. |
Putting in the New Battery
1. Disconnect the unfavorable terminal. Utilizing a 10mm wrench, loosen the nut on the unfavorable terminal of the previous battery. Take away the nut and washer, then elevate off the unfavorable terminal.
2. Disconnect the constructive terminal. Utilizing the identical wrench, loosen the nut on the constructive terminal of the previous battery. Take away the nut and washer, then elevate off the constructive terminal.
3. Take away the previous battery. Seize the previous battery by the handles and elevate it out of the automobile. Watch out to not drop it, as it’s heavy.
4. Clear the battery terminals. Use a wire brush to scrub the terminals on the previous battery and the cables on the automobile. It will guarantee a great reference to the brand new battery.
5. Set up the brand new battery. Place the brand new battery within the automobile, ensuring that the terminals are dealing with the proper course.
6. Join the constructive terminal. Place the constructive terminal on the constructive terminal of the brand new battery. Tighten the nut and washer utilizing the wrench.
| Connecting the Adverse Terminal |
|
Place the unfavorable terminal on the unfavorable terminal of the brand new battery. |
|
Tighten the nut and washer utilizing the wrench. |
|
Examine the connections to make sure they’re tight. |
7. Tighten the hold-down bolts. Utilizing the wrench, tighten the hold-down bolts that safe the battery in place.
8. Examine the battery connections. Guarantee all connections are tight and safe.
Connecting the Constructive Terminal
As soon as the unfavorable terminal is reconnected, it is time to join the constructive terminal. This course of ought to be much like connecting the unfavorable terminal. Be certain the constructive terminal is clear and freed from corrosion earlier than connecting it to the battery. The constructive terminal is often marked with a purple cable or a constructive signal (+). As soon as the constructive terminal is related, tighten the nut or bolt that secures it. Use the torque wrench to use the correct quantity of torque to the nut or bolt. The right torque for the constructive terminal could be discovered within the proprietor’s guide on your automobile.
After the constructive terminal is related, double-check the entire connections to verify they’re tight. Constructive terminal ought to be the final connection. Begin the engine to verify the battery is working correctly.
Tightening the Terminal Nuts
When tightening the terminal nuts, you will need to use a torque wrench to use the right amount of torque. The right torque for the terminal nuts could be discovered within the proprietor’s guide on your automobile. Overtightening the terminal nuts can harm the battery or the terminals.
| Software | Use |
|---|---|
| 10mm socket | To take away and set up the battery terminals |
| 10mm wrench | To tighten the battery terminals |
| Torque wrench | To use the right amount of torque to the battery terminals |
| Battery terminal cleaner | To wash the battery terminals and posts |
| Security glasses | To guard your eyes from battery acid |
Connecting the Adverse Terminal
The subsequent step is to attach the unfavorable terminal. That is the black cable, and it ought to be related to the unfavorable terminal on the brand new battery. Make it possible for the connection is tight, however don’t overtighten it. As soon as the unfavorable terminal is related, you can begin the automobile.
If you’re not comfy connecting the battery your self, you’ll be able to all the time take your automobile to a mechanic. They’ll be capable of safely and rapidly join the battery for you.
Listed below are some further suggestions for connecting the unfavorable terminal:
- Make it possible for the unfavorable terminal is clear and freed from corrosion.
- Use a wrench to tighten the connection, however don’t overtighten it.
- Double-check the connection to be sure that it’s tight.
- Begin the automobile to be sure that the connection is working correctly.
By following these steps, you’ll be able to safely and simply join the unfavorable terminal in your Hyundai Kona 2020.
| Step | Description |
|---|---|
| 1 | Find the unfavorable terminal on the brand new battery. |
| 2 | Clear the unfavorable terminal on the battery and the automobile. |
| 3 | Join the unfavorable cable to the unfavorable terminal on the battery. |
| 4 | Tighten the connection utilizing a wrench. |
| 5 | Double-check the connection to be sure that it’s tight. |
| 6 | Begin the automobile to be sure that the connection is working correctly. |
Security Precautions
Earlier than starting the battery substitute process, guarantee the security of your self and your automobile by adhering to the next precautions:
- Park the automobile on a flat, secure floor and interact the parking brake.
- Flip off the engine and permit the automobile to chill down.
- Disconnect the unfavorable terminal of the battery utilizing a wrench or socket.
- Put on gloves and eye safety to keep away from contact with battery acid.
Finding the Battery
The battery within the Hyundai Kona 2020 is situated within the engine compartment, sometimes close to the firewall or the entrance of the automobile.
Eradicating the Outdated Battery
Upon getting situated the battery, comply with these steps to take away the previous battery:
- Utilizing a wrench or socket, disconnect the constructive terminal of the battery.
- Take away the battery hold-down clamp or bracket.
- Fastidiously elevate the previous battery out of its compartment.
- Clear the battery terminals and the battery compartment utilizing a wire brush or terminal cleaner.
Putting in the New Battery
Earlier than putting in the brand new battery, guarantee it’s the appropriate measurement and sort on your automobile. Observe these steps to put in the brand new battery:
- Place the brand new battery within the compartment, guaranteeing the terminals align with the battery cable connectors.
- Set up the battery hold-down clamp or bracket.
- Join the constructive terminal of the battery utilizing a wrench or socket.
- Tighten the battery terminals by hand, then use a wrench or socket to make sure a safe connection.
Beginning the Car and Reconfiguring Settings
Beginning the Car
As soon as the brand new battery is put in, begin the automobile and let it run for a couple of minutes to cost the battery.
Reconfiguring Settings
After changing the battery, it’s possible you’ll must reconfigure sure automobile settings, such because the clock, radio presets, and local weather management settings. Seek the advice of your automobile’s proprietor’s guide for particular directions on reconfiguring settings.
How To Exchange Automobile Battery Kona 2020
Changing the automobile battery on a 2020 Hyundai Kona is a comparatively easy job that may be accomplished in a number of steps. Here is a fast information on how one can do it:
1. Security first: Park the automobile in a secure place, placed on security glasses, and switch off the engine.
2. Find the battery: The battery is often situated underneath the hood, secured with a metallic bracket.
3. Disconnect the unfavorable terminal: Utilizing a wrench, loosen the nut on the unfavorable (black) terminal, and elevate the terminal off the battery publish.
4. Disconnect the constructive terminal: Repeat step 3 for the constructive (purple) terminal.
5. Take away the battery hold-down bracket: Find the bolt or nut holding the battery in place, and loosen it.
6. Carry out the previous battery: Fastidiously elevate the previous battery out of the compartment.
7. Place the brand new battery: Decrease the brand new battery into the compartment, ensuring the terminals are dealing with the proper course.
8. Join the constructive terminal: Place the constructive (purple) terminal on the battery publish and tighten the nut.
9. Join the unfavorable terminal: Repeat step 8 for the unfavorable (black) terminal.
10. Tighten the battery hold-down bracket: Safe the battery in place by tightening the bolt or nut on the bracket.
11. Begin the engine: Begin the engine to test if the brand new battery is working correctly.
Folks Additionally Ask
How lengthy does it take to interchange a automobile battery on a 2020 Hyundai Kona?
It often takes round half-hour to interchange the battery on a 2020 Hyundai Kona.
What’s the price of changing a automobile battery on a 2020 Hyundai Kona?
The price of changing a battery on a 2020 Hyundai Kona can fluctuate relying on the kind of battery you select and the place you get it changed. Nevertheless, you’ll be able to anticipate to pay between $100 and $200 for the battery and labor.
Is it secure to interchange a automobile battery on a 2020 Hyundai Kona your self?
Changing the battery on a 2020 Hyundai Kona is a comparatively easy job, and it’s secure to do it your self you probably have some primary mechanical expertise. Nevertheless, if you’re not comfy working in your automobile, it’s best to take it to a mechanic.
