9 Simple Steps To Remove Ring Doorbell

9 Simple Steps To Remove Ring Doorbell

by

9 Simple Steps To Remove Ring Doorbell

Ring doorbells are an effective way to control your private home and deter burglars, however there could come a time when you must take away it. Whether or not you are shifting, changing it with a brand new mannequin, or just want to wash it, we’ll present a complete information on find out how to take Ring doorbell off effortlessly.

Earlier than you start, it is important to collect the mandatory instruments and security tools. You may want a screwdriver, a pair of pliers (optionally available), and a step stool or ladder for reaching larger installations. Moreover, guarantee you may have security glasses and gloves to guard your self from potential hazards whereas working with electrical elements.

After getting your instruments prepared, find the mounting bracket of the Ring doorbell. Typically, it’s going to be hooked up to the wall or door body utilizing screws or bolts. Use the screwdriver to unscrew these fasteners rigorously, supporting the doorbell with one hand to stop it from falling. Disconnect {the electrical} wires by gently pulling them aside. Ensure that to cap off the uncovered wires utilizing electrical tape for security. Lastly, elevate the Ring doorbell off the mounting bracket and retailer it in a safe location.

Eradicating the Faceplate

Earlier than you may take away the doorbell from its mount, you must take away the faceplate. Here is find out how to do it:

  1. Find the small screw on the backside of the faceplate. Use a screwdriver to loosen the screw.

  2. As soon as the screw is free, gently pull the faceplate away from the doorbell. Watch out to not pull too arduous, because the wires connecting the faceplate to the doorbell are delicate.

  3. As soon as the faceplate is eliminated, you will note the 2 wires that join it to the doorbell. Disconnect the wires by gently pulling them aside.

  4. Now that the faceplate is eliminated, you may transfer on to eradicating the doorbell from its mount.

  5. Warning: Earlier than eradicating the faceplate, ensure to energy down the doorbell on the breaker. Failure to take action may lead to electrical shock.

  6. Tip: If you’re having hassle eradicating the faceplate, you may strive utilizing a plastic spudger or a small flathead screwdriver to softly pry it off.

Instruments You may Want:
Phillips head screwdriver
Plastic spudger or small flathead screwdriver (optionally available)

Disconnecting the Wires

Earlier than disconnecting the wires, it is vital to make sure the Ring Doorbell is powered off and disconnected from the ability supply. Observe these steps to securely take away the doorbell:

Step 1: Take away the protection screw

Find the one screw on the underside of the Ring Doorbell. Use a Phillips head screwdriver to take away the screw.

Step 2: Gently pull the unit in the direction of you

As soon as the screw is eliminated, gently grasp the underside of the Ring Doorbell and pull it in the direction of you. It ought to simply come off the mounting bracket.

Step 3: Disconnect the wires

The Ring Doorbell has two wires: pink and black. To disconnect the wires, comply with these steps:

Wire Colour Steps
Pink Gently press the tab on the connector and pull the wire straight out.

Black Repeat the method to disconnect the black wire.

Step 4: Reattach the protection screw

As soon as the wires are disconnected, reattach the protection screw to the underside of the Ring Doorbell. This may safe the unit and forestall any unintended detachment.

Unscrewing the Mount

To unscrew the mount, you’ll need a Phillips #2 screwdriver. First, find the 2 screws which are holding the mount in place. They’re sometimes positioned on the underside of the mount. After getting discovered the screws, merely use the screwdriver to unscrew them. Watch out to not overtighten the screws, as this might injury the mount or the doorbell.

As soon as the screws are free, you may rigorously pull the mount away from the wall. The doorbell ought to now be free and you’ll take away it from the mount.

Listed below are some further suggestions for unscrewing the mount:

  • If the screws are significantly tight, you might want to make use of a pair of pliers to loosen them.
  • Watch out to not drop the doorbell when you find yourself eradicating it from the mount.
  • If you’re having any hassle unscrewing the mount, you may contact Ring buyer help for help.

Eradicating the Battery (if relevant)

Some Ring doorbells require a battery for operation, whereas others are powered by a wired connection. In case your doorbell makes use of a battery, you’ll need to take away it earlier than continuing to the following steps.

  1. Find the battery launch button, which is often positioned on the underside or again of the doorbell.
  2. Press and maintain the discharge button whereas sliding the battery out of its compartment.
  3. Eliminate the outdated battery correctly and insert a brand new one into the compartment, making certain correct polarity.
  4. Slide the battery again into place and launch the discharge button.

Detaching the Speaker

Step 1: Take away the Safety Screw

Find the safety screw on the underside of the doorbell. Use a screwdriver to take away the screw and set it apart.

Step 2: Unclip the Speaker

Fastidiously elevate the underside of the speaker housing away from the bottom of the doorbell. There are spring-loaded clips holding it in place. Use a small screwdriver or pry device to softly launch the clips.

Step 3: Disconnect the Speaker Wire

Find the speaker wire linked to the bottom of the doorbell. Gently pull the wire straight as much as detach it. Keep away from pulling on the wires themselves, as they are often fragile.

Step 4: Take away the Speaker Housing

Utilizing the pry device, rigorously separate the speaker housing from the bottom of the doorbell. The housing could also be barely adhered, so apply mild power.

Step 5: Unscrew the Speaker

Contained in the housing, find the 2 screws holding the speaker in place. Unscrew them and gently elevate the speaker out.

Step 6: Disconnect the Speaker Cable (Wired Doorbells Solely)

For wired doorbells, a further step is required.

For Doorbells with a Fast Launch Cable For Doorbells with a Screw Terminal Cable

Find the speaker cable and squeeze the discharge tab to disconnect it.

Find the screw terminal and loosen the screws to disconnect the cable.

Taking Aside the Housing

The Ring Doorbell housing consists of a entrance plate and a again plate. To disassemble the housing and entry the doorbell’s inside elements:

  1. Find the discharge button on the entrance plate, which is often on the facet or backside.
  2. Press and maintain the discharge button whereas gently pulling the entrance plate in the direction of you.
  3. Unclip the entrance plate from the rear plate.
  4. As soon as the entrance plate is eliminated, you will have entry to the doorbell’s wires and mounting screws.
  5. Disconnect the doorbell wires by gently pulling them out of the terminals.
  6. Unscrew the mounting screws to detach the doorbell from the mounting bracket.
  7. Fastidiously elevate the doorbell away from the mounting bracket.
Instrument Description
Phillips screwdriver For eradicating the mounting screws
Torx screwdriver For eradicating the safety screws (in some fashions)
Plastic opening device For prying open the housing (optionally available)

Changing the Battery or Wiring (if crucial)

It is vital to make sure that your Ring Doorbell has ample energy to operate correctly. If the battery wants changing or the wiring requires consideration, comply with these steps:

Checking Battery Life

To examine the battery degree, open the Ring app, faucet the “Units” tab and choose your doorbell. The battery icon will point out the present energy standing.

Changing the Battery

To switch the battery, find the 2 screws beneath the doorbell and take away them. Gently pull the doorbell off the mounting plate, expose the battery, and swap it with a brand new one. Reattach the doorbell to the plate and safe it with the screws.

Connecting to Energy

In case you choose a wired connection, an electrician can help with putting in a transformer and connecting the doorbell to your private home’s electrical system. This may present steady energy with out the necessity for battery replacements.

Wiring Specs

Wire Colour Objective
Pink Energy
White or Black Impartial
Inexperienced Floor

Observe the directions included along with your doorbell for particular wiring particulars.

Reinstalling the Ring Doorbell

After getting eliminated the Ring Doorbell from its mount, you may reinstall it by following these steps:

1. Insert the included mounting bracket into the again of the Ring Doorbell.

2. Place the Ring Doorbell on the mounting bracket and tighten the screws.

3. Determine the place you need to mount the Ring Doorbell on the wall. Use the included screws to safe the mounting bracket to the wall.

4. Slide the Ring Doorbell onto the mounting bracket and tighten the screw.

5. Join the wires to the terminals on the again of the Ring Doorbell. The pink wire connects to the terminal labeled “R,” and the black wire connects to the terminal labeled “C.”

6. Insert the battery into the Ring Doorbell.

7. Take a look at the Ring Doorbell to verify it’s working correctly.

8. Obtain the Ring app in your smartphone and create an account.

9. Observe the directions within the app to attach your Ring Doorbell to your Wi-Fi community, full the setup course of, and entry stay footage and different options.

Testing the Ring Doorbell

Earlier than eradicating your Ring Doorbell, it is important to check it to make sure it is functioning appropriately. Listed below are the steps to comply with:

1. Verify the Energy

Confirm that the Ring Doorbell is receiving energy by urgent the entrance button. If the sunshine ring flashes and also you hear a chime, the doorbell is powered.

2. Take a look at the Connectivity

Open the Ring app in your smartphone. Choose your Ring Doorbell from the checklist of gadgets. If the app connects and reveals a stay view from the doorbell’s digital camera, the connectivity is established.

3. Take a look at the Movement Detection

Wave your hand in entrance of the doorbell or stroll previous it. If the doorbell detects the movement and sends a notification to your telephone, the movement detection is working.

4. Take a look at the Chime

When you have a Ring Chime linked to your doorbell, press the button on the entrance of the doorbell and hear for the chime at your chime machine.

5. Take a look at the Night time Imaginative and prescient

At evening, cowl the doorbell’s lens along with your hand and see if the evening imaginative and prescient activates. You will note a black and white picture within the Ring app.

6. Take a look at the Two-Means Speak

Press the microphone icon within the Ring app and converse into your telephone’s microphone. It is best to hear your voice coming from the doorbell’s speaker.

7. Take a look at the Reside View

Open the Ring app and faucet “Reside View” to entry a real-time video feed from the doorbell’s digital camera.

8. Take a look at the Recording

When you have a Ring Defend subscription, set off an occasion (e.g., movement detection) and examine the Ring app for recorded footage.

9. Take a look at the Alerts

Arrange movement detection and chime alerts within the Ring app. Set off an occasion and examine when you obtain notifications in your telephone and electronic mail.

10. [Additional Testing for Wired Doorbells]

For wired doorbells:

Take a look at Description
Take away energy from the doorbell Flip off the circuit breaker or take away the fuse that powers the doorbell.
Disconnect the wires Fastidiously detach the wires from the terminals on the again of the doorbell.
Reconnect the wires Reconnect the wires to the proper terminals on the again of the doorbell.
Restore energy to the doorbell Activate the circuit breaker or substitute the fuse to revive energy.
Take a look at the doorbell Press the entrance button on the doorbell and confirm that it’s functioning appropriately.

The way to Take Ring Doorbell Off

There are a couple of the explanation why you might must take your Ring doorbell off. Possibly you are shifting, or perhaps you are simply having some hassle with it. Regardless of the cause, listed here are the steps on find out how to take your Ring doorbell off:

  1. Flip off the ability to your Ring doorbell on the breaker.
  2. Take away the 2 screws which are holding the faceplate on.
  3. Gently pull the faceplate off of the wall.
  4. Disconnect the wires from the again of the doorbell.
  5. Take away the doorbell from the wall.

After getting eliminated your Ring doorbell, you may retailer it in a secure place till you want it once more.

Folks Additionally Ask

How do I reset my Ring doorbell?

To reset your Ring doorbell, press and maintain the orange button on the again of the machine for 10 seconds. The doorbell will then reset and you’ll need to set it up once more.

How do I modify the battery in my Ring doorbell?

To alter the battery in your Ring doorbell, take away the 2 screws which are holding the faceplate on. Then, gently pull the faceplate off of the wall. The battery is positioned on the again of the doorbell. Disconnect the wires from the battery after which take away the battery. Insert the brand new battery and reconnect the wires. Lastly, put the faceplate again on and tighten the screws.

How do I troubleshoot my Ring doorbell?

If you’re having hassle along with your Ring doorbell, there are some things you may attempt to troubleshoot the problem. First, examine to make it possible for the doorbell is correctly linked to your Wi-Fi community. If the doorbell just isn’t linked to Wi-Fi, it won’t be able to operate correctly. You can too strive restarting your doorbell by urgent and holding the orange button on the again of the machine for 10 seconds. If the doorbell continues to be not working correctly, you might must contact Ring help for additional help.