Congratulations on finishing the highest of your quilt! Now it is time to end it off with a phenomenal binding. Binding not solely finishes the uncooked edges of your quilt, but it surely additionally provides an ornamental contact. There are a lot of other ways to bind a quilt, however we’ll present you the most typical technique, which is named “machine binding.” This technique is comparatively simple to do, and it produces a pleasant, clear end.
Earlier than you start, you will want to assemble a couple of provides. You may want a quilt, quilt binding, thread, a stitching machine, and a rotary cutter. After you have your provides, you are able to get began! To start, minimize your binding strips to the specified width. The width of your binding will depend upon the scale of your quilt. rule of thumb is to chop your binding strips 2 1/2 inches broad. As soon as you’ve got minimize your binding strips, you will want to affix them collectively. To do that, merely sew the strips collectively utilizing a 1/4-inch seam allowance. Press the seam open. Now you are prepared to connect the binding to your quilt.
To connect the binding, begin by pinning the binding to the fitting facet of your quilt. Make it possible for the uncooked edges of the quilt are even with the folded fringe of the binding. As soon as you’ve got pinned the binding in place, sew it down utilizing a 1/4-inch seam allowance. Press the seam open. Now fold the binding over to the again of the quilt and sew it down. You need to use a blind sew or a topstitch to do that. As soon as you’ve got stitched the binding down, your quilt is completed! Binding a quilt is an effective way to complete off your mission and provides it knowledgeable look. With a bit observe, you’ll bind a quilt like a professional!
Gathering Supplies
Embarking on a quilt binding mission requires meticulously gathering important supplies. The next guidelines will guarantee you’ve gotten every part you could create a flawless end in your quilt:
Quilt Binding Cloth
Fastidiously choose binding cloth that enhances the colours and patterns of your quilt high and backing. For a conventional look, contemplate a coordinating print or strong coloration. Should you want a extra artistic strategy, go for a contrasting cloth or one with a novel texture or sample. Bear in mind to buy sufficient cloth to accommodate the size of your quilt’s perimeter, plus further for mitering corners and turning underneath edges.
| Materials | Amount | Description |
|---|---|---|
| Quilt Binding Cloth | 1/3 yard for each 1 yard of quilt perimeter | Coordinating cloth for binding |
| Backing Cloth | Identical amount as Quilt Binding Cloth | Matching cloth for backing the binding |
| Matching Thread | Sufficient for hand or machine stitching | Shade coordinated with cloth alternative |
Along with these important supplies, contemplate having the next instruments readily available to make the binding course of smoother:
- Rotary cutter and reducing mat
- Quilt ruler
- Iron and ironing board
- Binding clips or pins
- Hand-sewing needle or stitching machine
Variations and Elaborations
Along with the essential strategies of quilt binding, there are quite a few variations and elaborations that may add a private contact to your creations. Listed below are some well-liked choices:
Bias Tape Binding
This system makes use of bias tape to bind the quilt, creating an ornamental and sturdy edge. Bias tape is a strip of material minimize on the diagonal, which provides it a pure stretchiness that conforms to curves and corners.
French Binding
Often known as a Hong Kong end, French binding conceals the uncooked edges of the quilt inside a folded cloth binding. This technique supplies a clear and stylish look, notably appropriate for light-weight or delicate materials.
Double-Fold Binding
This system entails folding the binding cloth over twice earlier than attaching it to the quilt. The double fold provides energy to the binding and creates an ornamental edge with crisp corners.
Zipper Binding
For a purposeful and surprising contact, think about using a zipper because the quilt binding. This selection means that you can simply take away or insert the quilt from its cowl for cleansing or storage.
Embroidered Binding
Add a private contact by embroidering designs or motifs onto the binding cloth earlier than attaching it to the quilt. This creates a novel and attention-grabbing embellishment.
Quilted Binding
Take your quilt binding to the following stage by quilting it along with a layer of batting. This system provides heat and texture to the binding, making a cohesive and completed look.
Appliqué Binding
Embellish the binding with appliqué designs minimize from contrasting materials. This system provides a playful and ornamental aspect to your quilt.
Machine Binding
For individuals who want a faster technique, machine binding can be utilized to connect the binding to the quilt. This system makes use of a particular presser foot to information the material and create a fair sew line.
| Binding Approach | Problem | Really helpful for |
|---|---|---|
| Bias Tape Binding | Simple | Newbie-friendly, curves and corners |
| French Binding | Reasonable | Light-weight or delicate materials, clear and stylish end |
| Double-Fold Binding | Simple | Light-weight to medium-weight materials, crisp corners |
| Zipper Binding | Reasonable | Detachable quilt covers, purposeful and surprising |
Trim the Extra Batting and Backing
Earlier than binding the quilt, you will have to trim off any extra batting and backing cloth. It will assist create a clear and completed edge.
Miter the Corners
Mitering the corners is a necessary step for a professional-looking end. To do that, fold the binding cloth over the uncooked fringe of the quilt at a 45-degree angle. Trim the surplus cloth and stitch the miter collectively.
Sew the Binding to the Quilt
Utilizing a needle and thread, sew the binding to the quilt. Begin in the midst of one facet and work your method round, ensuring to maintain the stitches even and near the sting.
Ideas for a Good End
1. Use a Blind Hem Sew
A blind hem sew is an effective way to connect the binding with out it displaying on the fitting facet of the quilt. To do that, use a stitching machine with a blind hem foot and comply with the producer’s directions.
2. Hand-Sew the Binding
Hand-sewing the binding provides you extra management over the method and can lead to a extra exact end. Use a small needle and thread and take your time to sew the binding securely.
3. Press the Binding
As soon as the binding is sewn on, press it with an iron to provide it a crisp and completed look. Use a low warmth setting to keep away from damaging the material.
4. Quilt the Binding
Quilting the binding provides an additional layer of safety and may give the quilt a extra ornamental contact. Use a small sew and quilt the binding alongside the sting of the quilt.
5. Trim the Extra Binding
After quilting the binding, trim off any extra cloth that overlaps the sting of the quilt.
6. Bind the Quilt in Sections
You probably have a big quilt, it may be simpler to bind it in sections. It will assist stop the quilt from getting too cumbersome.
7. Use a Distinction Binding
Utilizing a distinction binding can add a contact of fashion and curiosity to your quilt. Select a cloth that enhances the quilt high.
8. Embellish the Binding
You’ll be able to embellish the binding with ornamental stitches, beads, or different elaborations to create a novel and customized look.
9. Safe the Binding
Be certain the binding is securely connected to the quilt by topstitching or hand-stitching it in place.
10. Get pleasure from Your Completed Quilt!
As soon as the binding is full, you’ll be able to take pleasure in your completed quilt! With a bit care and a focus to element, you’ll be able to create a phenomenal and lasting piece of artwork.
Easy methods to Placed on a Quilt Binding
Including a quilt binding is the ultimate step in ending a quilt. It not solely provides an ornamental contact, but it surely additionally helps to guard the sides of the quilt from fraying. Binding may be produced from a wide range of materials, together with cotton, flannel, and bias tape. The commonest sort of binding is a single-fold binding, which is made by folding a strip of material in half lengthwise. Double-fold binding can be out there, which is made by folding a strip of material in half twice lengthwise.
To use the binding, you’ll need a stitching machine, thread, a rotary cutter or scissors, and a quilting ruler. Start by measuring the perimeter of the quilt and reducing a strip of binding that’s twice so long as the perimeter. Fold the binding in half lengthwise and press. Then, align the uncooked fringe of the binding with the uncooked fringe of the quilt and sew across the perimeter utilizing a 1/4 inch seam allowance. After you have stitched across the perimeter, trim the surplus binding from the corners. Fold the binding to the again of the quilt and sew it down by hand utilizing a blind sew.
Listed below are some ideas for placing on a quilt binding:
- Use a pointy needle and thread that matches the colour of the binding.
- Sew slowly and evenly across the perimeter of the quilt.
- Trim the surplus binding from the corners earlier than folding it to the again of the quilt.
- Use a blind sew to sew the binding to the again of the quilt.
Individuals Additionally Ask About Easy methods to Placed on a Quilt Binding
How do I select the fitting cloth for quilt binding?
The perfect cloth for quilt binding is a medium-weight cotton cloth that isn’t too stiff or too flimsy. Some good decisions embody quilting cotton, flannel, and bias tape.
What’s the distinction between single-fold and double-fold binding?
Single-fold binding is made by folding a strip of material in half lengthwise. Double-fold binding is made by folding a strip of material in half twice lengthwise. Single-fold binding is simpler to use, however double-fold binding is extra sturdy.
How do I miter the corners of the binding?
To miter the corners of the binding, you’ll need to chop the binding at a 45-degree angle. Then, fold the binding in half on the nook and sew it down. Trim the surplus binding and fold it to the again of the quilt.
