Changing a rest room paper holder may not rank excessive in your checklist of priorities, however a defective or outdated holder can rapidly turn into an annoyance. Whether or not it is continually coming free or just does not match your rest room decor, a brand new bathroom paper holder could make a world of distinction. The excellent news is that changing a rest room paper holder is a comparatively easy DIY mission that may be accomplished in only a few minutes. On this article, we’ll stroll you thru the step-by-step technique of changing a rest room paper holder, together with easy methods to take away the outdated holder and set up the brand new one. By following these directions, you can restore your rest room to its former glory very quickly.
Earlier than you start, it is vital to collect the mandatory instruments and supplies. You will want a brand new bathroom paper holder, a screwdriver (both a Phillips head or flat head, relying on the kind of screws used in your outdated holder), a drill (in case you’re putting in the brand new holder right into a wall that does not have current holes), and a degree. After you have every little thing you want, you can begin the alternative course of.
To take away the outdated bathroom paper holder, merely unscrew the screws which might be holding it in place. As soon as the screws are eliminated, the holder ought to come off simply. If the holder is especially cussed, you could want to make use of a pry bar to softly pry it off the wall. As soon as the outdated holder is eliminated, you possibly can set up the brand new holder by following the identical steps in reverse. First, maintain the brand new holder as much as the wall and mark the areas of the screw holes. Then, use a drill to create pilot holes for the screws. Subsequent, insert the screws into the pilot holes and tighten them till the holder is safe. Lastly, use a degree to verify the holder is degree, and also you’re all set!
Gathering Supplies and Instruments
Changing a rest room paper holder is a simple process that usually solely requires a couple of primary instruments. This is an in depth checklist of supplies and instruments you may want for the job:
Supplies:
- New bathroom paper holder
- Screws or bolts (if obligatory, relying on the holder design)
- Anchors (if obligatory, for drywall or different mushy surfaces)
Instruments:
- Screwdriver (Phillips or flathead, relying on the screw kind)
- Drill (if obligatory, for putting in anchors)
- Stage (non-compulsory, for exact alignment)
- Measuring tape (non-compulsory)
- Pencil or marker (non-compulsory, for marking holes)
Further Issues:
| Materials | Description |
|---|---|
| Anti-rust screws | Advisable for areas with excessive humidity or publicity to water |
| Ornamental caps or covers | Elective equipment to boost the aesthetics of the holder |
| Stud finder | Elective instrument to find studs within the wall for safe anchoring |
Making ready the Mounting Floor
Earlier than putting in a brand new bathroom paper holder, it is important to make sure the mounting floor is sufficiently ready to attain a safe and sturdy set up.
Cleansing the Floor
Begin by totally cleansing the world the place the bathroom paper holder can be mounted to take away any grime, mud, or particles. Use a moist material or sponge with a gentle cleansing answer. Permit the floor to dry utterly earlier than continuing.
Eradicating Previous Adhesive
If there may be any remaining adhesive or residue from the earlier bathroom paper holder, it have to be eliminated. Use a scraping instrument or a business adhesive remover to softly scrape away the outdated adhesive. Be cautious to not injury the floor beneath.
Leveling and Marking the Location
As soon as the floor is clear and freed from particles, decide the specified placement for the bathroom paper holder. Use a degree to make sure that the holder can be mounted straight. Mark the situation of the mounting holes with a pencil or a everlasting marker. Check with the producer’s directions for the precise measurements required.
| Step | Motion |
|---|---|
| 1 | Clear the mounting floor |
| 2 | Take away outdated adhesive or residue |
| 3 | Find and mark the mounting factors |
| 4 | Test for levelness |
Attaching the Bathroom Paper Holder
1. Make Certain the Holder is Mounted at a Handy Peak
Earlier than you mount the bathroom paper holder, make certain it is at a cushty top for everybody who can be utilizing it. The perfect top is usually 24-28 inches from the ground to the middle of the roll. Mark the specified location on the wall with a pencil.
2. Align the Mounting Plate
Place the mounting plate over the marked location and degree it utilizing a degree. Use a pencil to mark the screw holes on the wall.
3. Drill Pilot Holes
Utilizing a drill with a masonry bit, drill pilot holes on the marked screw areas. The depth of the holes must be barely shorter than the size of the screws you may be utilizing.
4. Insert the Anchor Screws (if wanted)
When you’re mounting the holder into drywall or plaster, insert plastic or metallic anchor screws into the pilot holes. These anchors will present further help for the screws.
5. Set up the Mounting Plate
Align the mounting plate with the pilot holes. Drive the screws into the holes, both immediately or by the anchor screws. Tighten the screws securely, however not excessively.
| Screw Sort | Description |
|---|---|
| Wooden screws | Used for mounting into wooden surfaces |
| Drywall screws | Used for mounting into drywall or plaster |
| Masonry screws | Used for mounting into concrete or tile |
As soon as the mounting plate is put in, the bathroom paper holder may be hooked up to it by sliding it into place and securing it with the supplied screws or bolts.
Security Issues
Changing a rest room paper holder might seem easy, but it surely’s important to prioritize security to keep away from potential hazards. Listed here are some vital security issues to remember:
1. Disconnect the Water Provide: Earlier than beginning any work, flip off the water provide valve situated behind or beneath the bathroom. Flushing the bathroom will assist drain any remaining water from the tank and bowl.
2. Use Correct Instruments: Guarantee you may have the suitable instruments for the job, corresponding to a screwdriver, wrench, or pliers. Utilizing the proper instruments will decrease the danger of injury or harm.
3. Shield Your Eyes: Put on security glasses to guard your eyes from any particles or flying particles in the course of the course of.
4. Test for Hidden Hazards: Examine the world round the bathroom paper holder for any electrical wires, plumbing pipes, or different obstacles that would pose a security hazard.
5. Keep away from Overtightening: When tightening the screws or bolts, be conscious to not overtighten them. Extreme drive can injury the holder or the encircling wall materials.
6. Safe the Bracket: Guarantee the bathroom paper holder bracket is securely fixed to the wall to forestall it from wobbling or turning into free.
7. Use Waterproof Sealant: For added safety in opposition to moisture injury, apply waterproof sealant across the base of the holder the place it meets the wall.
8. Deal with Porcelain with Care: In case your bathroom paper holder is mounted on porcelain tiles, deal with them with care to keep away from chipping or cracking.
9. Examine Commonly: Periodically verify the bathroom paper holder for any free screws, cracks, or different indicators of injury. Handle any points promptly to make sure continued protected and dependable use.
10. Use a Step Stool or Ladder: If the bathroom paper holder is situated at a top, use a step stool or ladder for stability and to forestall falls.
How To Exchange Bathroom Paper Holder
Changing a rest room paper holder is an easy process that may be accomplished in a couple of minutes. Listed here are the steps concerned:
-
Flip off the water provide to the bathroom.
-
Flush the bathroom to empty the tank.
-
Take away the outdated bathroom paper holder by unscrewing the screws that maintain it in place.
-
Set up the brand new bathroom paper holder by screwing it into place.
-
Activate the water provide to the bathroom and verify for leaks.
Folks Additionally Ask
Can I exchange a rest room paper holder with out turning off the water?
No, you need to at all times flip off the water provide to the bathroom earlier than changing the bathroom paper holder. It will forestall water from leaking out of the tank while you take away the outdated holder.
What kind of screws ought to I take advantage of to put in a rest room paper holder?
It is best to use screws which might be the identical measurement as those that held the outdated holder in place. In case you are unsure what measurement screws to make use of, you possibly can take the outdated holder to a ironmongery shop and ask for assist.
How typically ought to I exchange my bathroom paper holder?
It is best to exchange your bathroom paper holder each time it turns into free or broken. You might also need to exchange it if you wish to replace the look of your rest room.
