Changing the keyboard in your Gateway Gwtn156-1rg laptop computer might appear to be a frightening job, however it’s truly fairly simple with the correct instruments and a little bit of endurance. Whether or not your keyboard has develop into unresponsive, keys are sticking or falling off, otherwise you merely need to improve to a greater typing expertise, this information will stroll you thru the steps concerned in changing the keyboard your self. By following these directions rigorously, it can save you the price of hiring an expert and get your laptop computer again to working order very quickly.
First, it is vital to assemble the required instruments for the job. You will have a small Phillips head screwdriver, a plastic pry software, and a brand new keyboard appropriate along with your Gateway Gwtn156-1rg laptop computer. After getting all the required supplies, you’ll be able to start the alternative course of.
Earlier than you begin disassembling your laptop computer, it is vital to energy it down and unplug it from any energy sources. This may assist forestall any electrical harm to the parts in the course of the restore course of. Moreover, it is a good suggestion to again up any vital knowledge in your laptop computer earlier than beginning, simply in case something surprising occurs in the course of the alternative.
Eradicating the Outdated Keyboard
Changing the keyboard in your Gateway Gwtn156-1rg laptop computer requires cautious disassembly and exact reassembly. Earlier than you start, collect the required instruments and guarantee you will have enough workspace.
Supplies You may Want:
| Merchandise | Description |
|---|---|
| Small Phillips screwdriver | To take away screws |
| Small flathead screwdriver or plastic pry software | To detach the keyboard |
| Anti-static wrist strap | To stop electrostatic discharge |
Steps:
- Disconnect the laptop computer and energy it off. Flip the laptop computer the other way up and find the six screws securing the bottom panel. Take away the screws and punctiliously raise off the panel.
- Find the keyboard ribbon cable. The ribbon cable is a skinny, flat connector that joins the keyboard to the motherboard. It’s normally secured by a small plastic clip or latch. Use the flathead screwdriver or pry software to softly launch the clip and disconnect the ribbon cable.
- Take away the keyboard securing screws. Across the edges of the keyboard, you can see a number of small screws holding it in place. Take away these screws utilizing the Phillips screwdriver.
- Pry the keyboard unfastened. Gently insert the flathead screwdriver or pry software into the hole between the keyboard and the laptop computer body. Slowly work the software across the edges of the keyboard, prying it unfastened till it lifts free from the body.
Warning: When prying the keyboard unfastened, watch out to not harm any of the encompassing parts or the keyboard itself.
Disconnecting the Battery
Earlier than you start working in your laptop computer, it is very important disconnect the battery to forestall any electrical shocks or harm to your pc. Here is a step-by-step information on the way to disconnect the battery:
1. Flip off the laptop computer and unplug it from the facility outlet.
2. Flip the laptop computer the other way up and take away the screws that maintain the battery in place. The quantity and placement of screws can differ relying on the particular Gateway mannequin, however they’re normally situated on the underside of the laptop computer.
| Gateway Gwtn156-1rg Battery Removing |
|---|
| Take away each screws situated within the battery compartment, one on both sides. |
3. As soon as the screws are eliminated, rigorously raise the battery out of the battery compartment. Watch out to not harm the battery or any of the encompassing parts.
Unplugging the Keyboard Cable
The fourth step is to unplug the keyboard cable. To do that, you will want a small flat-head screwdriver or a plastic spudger. First, find the keyboard cable. Will probably be a small, skinny cable that’s linked to the motherboard on one finish and to the keyboard on the opposite finish. After getting situated the cable, rigorously pry it unfastened from the motherboard utilizing the screwdriver or spudger. Watch out to not harm the cable or the motherboard.
As soon as the cable is disconnected, you’ll be able to take away the keyboard from the laptop computer. To do that, merely raise the keyboard up from the entrance edge and pull it in the direction of you. The keyboard ought to come free simply.
| Step | Description |
|---|---|
| 1 | Find the keyboard cable. |
| 2 | Rigorously pry the cable unfastened from the motherboard. |
| 3 | Take away the keyboard from the laptop computer. |
Eradicating the Keyboard Screws
As soon as the keyboard bezel has been eliminated, you may have to find the screws that safe the keyboard to the laptop computer. These screws are sometimes small and black, and so they’ll be situated alongside the highest and backside edges of the keyboard.
To take away the screws, you may want to make use of a small Phillips head screwdriver. Watch out to not overtighten the screws once you’re placing them again in, as this might harm the keyboard.
Desk of Screw Areas
| Screw Location |
|---|
| High fringe of keyboard, centered |
| High fringe of keyboard, left and proper corners |
| Backside fringe of keyboard, centered |
| Backside fringe of keyboard, left and proper corners |
As soon as you’ve got eliminated all the screws, you’ll be able to rigorously raise the keyboard up and away from the laptop computer. Watch out to not harm the keyboard cable, which is connected to the underside of the keyboard.
Making ready the New Keyboard
Earlier than you start the set up course of, it is very important put together the brand new keyboard for set up. Observe these steps to organize your new keyboard:
-
Unpack the New Keyboard
Rigorously unpack the brand new keyboard and take away it from its protecting packaging.
-
Examine the New Keyboard
Earlier than putting in the brand new keyboard, examine it for any bodily harm, similar to cracks or damaged keys. Should you discover any harm, don’t set up the keyboard and call the producer.
-
Join the New Keyboard
Join the brand new keyboard to your pc utilizing the included USB cable or wi-fi adapter. Ensure the keyboard is securely linked.
-
Take a look at the New Keyboard
As soon as the brand new keyboard is linked, take a look at it to make sure it’s working correctly. Press every key and confirm that it registers appropriately. If any keys usually are not working, confer with the producer’s documentation for troubleshooting.
-
Clear the New Keyboard
Earlier than putting in the brand new keyboard, clear it with a tender, dry material to take away any mud or particles. This may assist forestall grime and dirt from accumulating contained in the keyboard and affecting its efficiency.
-
Collect Essential Instruments
Collect the required instruments for the set up course of, similar to a Phillips head screwdriver, anti-static wrist strap, and a clear work floor. Make sure that the work space is well-lit and freed from muddle.
Connecting the New Keyboard Cable
After getting eliminated the outdated keyboard and ready the brand new one, it is time to join the brand new keyboard cable. Here is an in depth information on how to do that:
1. Find the Keyboard Connector
Open up the laptop computer and search for the keyboard connector. It is normally an oblong port situated close to the sting of the motherboard.
2. Disconnect the Outdated Cable
Gently raise up the tab or lever that secures the outdated keyboard cable. Then, pull the cable out of the connector.
3. Put together the New Cable
Make sure that the brand new keyboard cable is oriented appropriately. The connector ought to have a small arrow or notch that matches a corresponding mark on the connector port.
4. Insert the New Cable
Align the brand new keyboard cable with the connector and gently push it in till it clicks into place.
5. Safe the Cable
Lock the brand new keyboard cable in place by urgent down on the tab or lever that secures it.
6. Take a look at the Keyboard
Now that the brand new keyboard cable is linked, activate the laptop computer and take a look at the keyboard to make sure it is functioning appropriately.
7. Particular Concerns for Gateway GWTN156-1RG
For the Gateway GWTN156-1RG laptop computer, there are a number of extra steps to think about:
i. Take away the Battery
Earlier than you start, take away the battery from the laptop computer for security.
ii. Put together the Laptop computer
Flip the laptop computer the other way up and take away the again panel by unscrewing the screws that safe it.
iii. Find the Keyboard Cable
The keyboard cable is normally situated beneath the battery compartment. It is a black cable with an oblong connector.
Uninstalling Outdated Key Caps
1. Begin by flipping the laptop computer the other way up.
2. Find the small screws on the underside of the keyboard and take away them utilizing a Phillips head screwdriver.
3. Rigorously raise the keyboard up and away from the laptop computer.
4. Use a keycap puller or a small flathead screwdriver to softly pry the outdated key caps off the keyboard.
Putting in the Key Caps
5. Align the brand new key cap with the proper place on the keyboard.
6. Press down on the important thing cap till it snaps into place.
7. Repeat this course of for all of the keys.
Putting in the Spacebar
8. The spacebar is barely bigger than the opposite keys and requires a particular set up methodology.
9. Maintain the spacebar the other way up and insert the steel stabilizers into the slots on the keyboard.
10. Gently push the spacebar down till it snaps into place.
11. Flip the laptop computer again over and test that every one the keys are securely mounted.
12. Activate the laptop computer and take a look at the keyboard to make sure it’s functioning correctly.
| Step | Description |
|---|---|
| 1 | Flip the laptop computer the other way up. |
| 2 | Take away the screws on the underside of the keyboard. |
| 3 | Elevate the keyboard up and away from the laptop computer. |
| 4 | Pry off the outdated key caps utilizing a keycap puller or a small flathead screwdriver. |
| 5 | Align the brand new key cap with the proper place on the keyboard. |
| 6 | Press down on the important thing cap till it snaps into place. |
| 7 | Repeat this course of for all of the keys. |
| 8 | Maintain the spacebar the other way up and insert the steel stabilizers into the slots on the keyboard. |
| 9 | Gently push the spacebar down till it snaps into place. |
| 10 | Flip the laptop computer again over and test that every one the keys are securely mounted. |
| 11 | Activate the laptop computer and take a look at the keyboard to make sure it’s functioning correctly. |
Reattaching the Battery
9. Reattach the battery.
- Align the battery with the connector on the motherboard, as proven under:
- Gently push the battery down till it clicks into place.
- Safe the battery with the screws that you just eliminated earlier.
 |
| Battery connector |
Testing the New Keyboard
As soon as the brand new keyboard is put in, it is important to check its performance completely to make sure it really works as anticipated. Listed here are the steps to check the keyboard:
- Energy in your Gateway Gwtn156-1rg laptop computer.
- Entry any textual content editor or doc (e.g., Microsoft Phrase, Notepad).
- Utilizing all of the keys on the keyboard, sort a pattern textual content to test if every key registers and produces the proper characters.
- Take a look at particular keys just like the perform keys (F1-F12), arrow keys, and modifier keys (Ctrl, Alt, Shift).
- Make sure the quantity pad (if current) works appropriately by typing numbers and utilizing the quantity lock key.
- Strive mixtures of keys, similar to holding down Shift whereas urgent different keys, to check for simultaneous keystrokes.
- Verify for any caught or unresponsive keys by repeatedly urgent and releasing them.
- Take a look at the keyboard’s responsiveness by typing shortly and observing if there are any delays or missed keystrokes.
- Verify if the keyboard backlight (if relevant) activates and off as anticipated.
- Should you encounter any points or malfunctions throughout testing, confer with the keyboard’s documentation or contact technical assist for help.
How To Substitute Keyboard On Gateway Gwtn156-1rg
Changing the keyboard on a Gateway GWTP156-1RG laptop computer is a comparatively easy course of that may be accomplished in about half-hour. Listed here are the steps on the way to do it:
- Flip off the laptop computer and unplug it from the facility outlet.
- Shut the laptop computer and flip it the other way up.
- Find the screws that safe the keyboard to the laptop computer chassis. There are normally two screws situated on the prime of the keyboard and two screws situated on the backside.
- Take away the screws and punctiliously raise the keyboard up and away from the laptop computer chassis.
- Disconnect the keyboard cable from the motherboard.
- Join the brand new keyboard cable to the motherboard.
- Place the brand new keyboard in place and safe it with the screws.
- Flip the laptop computer again over and open it up.
- Activate the laptop computer and take a look at the brand new keyboard.
Folks additionally ask
How a lot does it price to exchange a keyboard on a Gateway GWTP156-1RG laptop computer?
The price of changing a keyboard on a Gateway GWTP156-1RG laptop computer will differ relying on the make and mannequin of the keyboard. Nevertheless, you’ll be able to anticipate to pay between $20 and $50 for a brand new keyboard.
Can I substitute the keyboard on my Gateway GWTP156-1RG laptop computer myself?
Sure, you’ll be able to substitute the keyboard in your Gateway GWTP156-1RG laptop computer your self. Nevertheless, it is very important notice that this can be a delicate course of and it is very important observe the directions rigorously. If you’re not comfy changing the keyboard your self, you’ll be able to at all times take it to a professional technician.
