** Set the Clock on a 2009 Harley-Davidson Extremely Traditional**
The 2009 Harley-Davidson Extremely Traditional is a well-liked motorbike that options a wide range of facilities, together with a digital clock. Setting the clock is an easy course of that may be accomplished in only a few minutes. Nonetheless, if you do not have the proprietor’s guide, you could be questioning the best way to do it. Listed below are the steps on the best way to set the clock on a 2009 Harley-Davidson Extremely Traditional and not using a title:
First, find the clock on the motorbike. It’s situated on the instrument panel, between the speedometer and tachometer. After getting discovered the clock, press and maintain the “Mode” button till the time begins to flash. Use the “Up” and “Down” buttons to regulate the hour and minute. After getting set the time, press the “Mode” button once more to save lots of the adjustments. The clock will now show the right time.
Accessing the Instrument Cluster
To entry the instrument cluster, comply with these steps:
1. Find the instrument cluster, which is usually mounted on the handlebars.
2. Press and maintain the “MODE” button on the cluster till the show reveals the “Time” possibility.
3. Launch the “MODE” button and press the “SET” button to enter time-setting mode.
4. Press the “HOUR” and “MIN” buttons to regulate the time.
| Button | Perform |
|---|---|
| Mode | Scrolls via show choices (e.g., time, mileage, gasoline) |
| Set | Confirms chosen possibility or enters time-setting mode |
| Hour | Adjusts the hour in time-setting mode |
| Min | Adjusts the minutes in time-setting mode |
5. Press the “MODE” button once more to save lots of the brand new time and return to the traditional show.
Figuring out the Clock Adjustment Buttons
The 2009 Harley Extremely Traditional options an easy-to-use clock adjustment system. To find the adjustment buttons, first establish the instrument cluster on the motorbike’s dashboard. This cluster homes the speedometer, tachometer, and different very important gauges.
On the right-hand facet of the instrument cluster, you can see two small buttons labeled “MODE” and “SET”. These buttons function the controls for adjusting the clock and different necessary settings.
To start adjusting the clock, press and maintain the “MODE” button till the clock show begins to flash. This means that the clock is now in adjustment mode.
Subsequent, use the “SET” button to increment or decrement the time. Every press of the button will improve or lower the time by one minute. Maintain down the “SET” button to shortly advance or rewind the time.
After getting adjusted the time to your required setting, launch the “SET” button. The clock will mechanically save the brand new time and exit adjustment mode.
If you have to alter the time once more, merely repeat the above steps. The Harley Extremely Traditional’s clock adjustment system is designed to be user-friendly and simple, guaranteeing that you would be able to at all times hold observe of the time whereas driving.
Setting the Time
Setting the Clock Show Mode
Step one is to set the clock show mode to 12-hour or 24-hour format. To do that, press and maintain the “Mode” button for 3 seconds. Use the “Adj” knob to pick the specified format and press the “Mode” button to verify.
Adjusting the Hour
Press and maintain the “Adj” knob for 3 seconds to enter time adjustment mode. The hour digits will begin flashing. Use the “Adj” knob to regulate the hours by scrolling via the numbers. As soon as the right hour is displayed, launch the “Adj” knob.
Adjusting the Minutes
After adjusting the hour, the minute digits will begin flashing. Use the “Adj” knob to regulate the minutes by scrolling via the numbers. Launch the “Adj” knob when the right minutes are displayed.
Instance of Setting the Time
Suppose you wish to set the time to 10:15 AM. Comply with these steps:
| Step | Motion |
|---|---|
| 1 | Press and maintain “Mode” for 3 seconds. |
| 2 | Use the “Adj” knob to pick “12 Hour” format. |
| 3 | Press “Mode” to verify. |
| 4 | Press and maintain “Adj” for 3 seconds. |
| 5 | Flip the “Adj” knob to set the hour to 10. |
| 6 | Flip the “Adj” knob to set the minutes to fifteen. |
| 7 | Launch the “Adj” knob to save lots of the time. |
Setting the Clock
- Use the MODE button on the left handlebar to navigate to the Clock setting.
- Press the SELECT button to entry the Clock menu.
- Use the UP and DOWN buttons to regulate the hour.
- Press the SELECT button to verify the hour setting.
- Use the UP and DOWN buttons to regulate the minutes.
- Press the SELECT button to verify the minute setting.
Saving the Settings
1. Press the MODE button to exit the Clock menu.
2. Look ahead to the clock to show the right time.
3. The settings can be mechanically saved.
**Notice:** If you don’t anticipate the clock to show the right time earlier than exiting the Clock menu, the settings is not going to be saved.
Troubleshooting
* If the clock will not be displaying the right time, examine the battery connection.
* If the clock will not be responding to button presses, strive resetting the unit.
Extra Info
* The clock will be set to both a 12-hour or 24-hour format.
* The clock will be set to both show the time in hours and minutes or in hours, minutes, and seconds.
* The clock will be set to both use the AM/PM format or the 24-hour format.
Making certain Clock Accuracy
To make sure the clock in your 2009 Harley Extremely Traditional stays correct, comply with these steps:
1. Syncing System Time with GPS
The Extremely Traditional’s clock can sync mechanically with the GPS sign, offering excessive accuracy. Make sure the GPS antenna is lively and linked.
2. Handbook Adjustment
If GPS is unavailable, you may set the clock manually. Use the “Clock” menu on the instrument cluster to regulate hours, minutes, and seconds.
3. Sustaining Battery Energy
A weak battery can disrupt clock accuracy. Substitute the battery as wanted or join the bike to a battery tender when not in use for prolonged durations.
4. Checking Antenna Connection
Confirm that the GPS antenna is securely linked to the bike’s electrical system. A unfastened connection can compromise sign reception.
5. Calibrating GPS
If GPS accuracy stays compromised, carry out a GPS calibration. Seek the advice of your bike’s proprietor’s guide for particular directions.
6. Checking For Interference
Electromagnetic interference from different gadgets can have an effect on GPS indicators. Place the bike away from potential sources of interference, comparable to building websites or energy traces.
7. Updating Firmware
Software program updates might enhance GPS sign reception and clock accuracy. Examine along with your Harley-Davidson vendor for out there firmware updates.
8. Troubleshooting Persistent Inaccuracy
In case you persistently expertise clock inaccuracy even after following these steps, take into account the next:
| Doable Trigger | Answer |
|---|---|
| Defective GPS antenna | Examine the antenna for harm or unfastened connections. Substitute if mandatory. |
| Malfunctioning instrument cluster | Seek the advice of your Harley-Davidson vendor for analysis and restore. |
| Broken electrical wiring | Examine for any seen harm to wires linked to the GPS antenna or instrument cluster. Restore or change as wanted. |
Resetting the Clock
To reset the clock, merely press and maintain the “Mode” button for about 5 seconds. The clock will then reset to 12:00 PM.
Setting the Hour
1. Press the “Mode” button to enter the clock setting mode.
2. Press the “Hour” or “Min” button to regulate the hour.
3. Press the “Mode” button to save lots of the adjustments and exit the clock setting mode.
Setting the Minute
1. Press the “Mode” button to enter the clock setting mode.
2. Press the “Min” button to regulate the minute.
3. Press the “Mode” button to save lots of the adjustments and exit the clock setting mode.
Setting the AM/PM Indicator
1. Press the “Mode” button to enter the clock setting mode.
2. Press the “AM/PM” button to toggle between AM and PM.
3. Press the “Mode” button to save lots of the adjustments and exit the clock setting mode.
Setting the 12/24-Hour Format
1. Press the “Mode” button to enter the clock setting mode.
2. Press the “12/24” button to toggle between the 12-hour and 24-hour format.
3. Press the “Mode” button to save lots of the adjustments and exit the clock setting mode.
Setting the Date
1. Press the “Mode” button to enter the clock setting mode.
2. Press the “Date” button to regulate the date.
3. Press the “Mode” button to save lots of the adjustments and exit the clock setting mode.
Setting the Month
1. Press the “Mode” button to enter the clock setting mode.
2. Press the “Month” button to regulate the month.
3. Press the “Mode” button to save lots of the adjustments and exit the clock setting mode.
Setting the Yr
1. Press the “Mode” button to enter the clock setting mode.
2. Press the “Yr” button to regulate the 12 months.
3. Press the “Mode” button to save lots of the adjustments and exit the clock setting mode.
Set Clock on 2009 Harley Extremely Traditional
These straightforward steps will information you thru setting the clock in your 2009 Harley Extremely Traditional:
- Find the clock in your motorbike. It’s normally situated on the instrument cluster.
- Flip the ignition key to the “On” place.
- Press and maintain the “Mode” button till the clock begins flashing.
- Use the “Up” and “Down” buttons to regulate the hours.
- Press the “Mode” button once more to maneuver to the minutes.
- Use the “Up” and “Down” buttons to regulate the minutes.
- Press the “Mode” button one final time to save lots of the adjustments.
Ideas for Sustaining Clock Performance
Listed below are some ideas for sustaining the performance of your clock:
Maintain the battery in good situation.
A weak battery may cause the clock to lose time or cease working altogether. Be sure that to switch the battery frequently, particularly if you happen to discover that the clock is beginning to lose time.
Examine the connections.
Free or corroded connections may trigger the clock to malfunction. Be sure that to examine the connections frequently and clear them if mandatory.
Keep away from exposing the clock to excessive temperatures.
Excessive temperatures can harm the clock’s elements. Attempt to hold the clock out of direct daylight and excessive chilly.
Do not use harsh chemical compounds to scrub the clock.
Harsh chemical compounds can harm the clock’s end and elements. Use a gentle cleaning soap and water answer to scrub the clock as an alternative.
If the clock remains to be not working correctly, take it to a certified mechanic.
There could also be a extra significant issue that must be addressed. A certified mechanic can diagnose the issue and restore the clock.
Set Clock on 2009 Harley Extremely Traditional
1. Find the clock on the instrument cluster. It’s situated within the middle of the cluster, under the speedometer and tachometer.
2. Press and maintain the “Mode” button on the left facet of the instrument cluster.
3. Use the up and down arrow buttons on the proper facet of the instrument cluster to regulate the hour.
4. Press the “Mode” button to verify the hour.
5. Repeat steps 3 and 4 to regulate the minutes.
6.Press the “Mode” button to verify the time.
Folks Additionally Ask About How To Set Clock On 2009 Harley Extremely Traditional
The place is the clock situated on a 2009 Harley Extremely Traditional?
The clock is situated within the middle of the instrument cluster, under the speedometer and tachometer.
How do I reset the clock on a 2009 Harley Extremely Traditional?
To reset the clock, press and maintain the “Mode” button for five seconds. The clock will reset to 12:00 AM.
How do I modify the clock to army time on a 2009 Harley Extremely Traditional?
The clock can’t be modified to army time on a 2009 Harley Extremely Traditional.
