How To Program Liftmaster Keypad
Programming a Liftmaster keypad is an easy course of that may be accomplished in just some minutes. First, you will have to collect your supplies. You will have the Liftmaster keypad, a ladder, and a Phillips screwdriver. Upon getting your supplies, you’ll be able to start the programming course of.
To start, you will have to take away the keypad from the wall. To do that, merely use the Phillips screwdriver to take away the 2 screws which can be holding the keypad in place. As soon as the screws are eliminated, you’ll be able to pull the keypad away from the wall. Subsequent, you will have to find the programming button on the again of the keypad. The programming button is often a small, black button that’s positioned close to the highest of the keypad. Upon getting positioned the programming button, you’ll be able to start programming the keypad.
To program the keypad, you will have to enter a four-digit code. This code could be any quantity that you really want, however it is very important keep in mind the code that you just enter. Upon getting entered the code, you will have to press the programming button. The keypad will then start to flash. As soon as the keypad has stopped flashing, the programming course of is full. Now you can reattach the keypad to the wall and start utilizing it.
Learn how to Program Liftmaster Keypad
To program your Liftmaster keypad, you will have the next objects:
- Liftmaster keypad
- Screwdriver
- 9-volt battery
Upon getting gathered your supplies, comply with these steps:
- Take away the duvet of the keypad by unscrewing the 2 screws that maintain it in place.
- Find the “be taught” button on the again of the keypad. This button is often crimson or yellow.
- Press and maintain the “be taught” button for 5 seconds. The LED on the keypad will begin to flash.
- Inside 30 seconds, press the button on the distant management that you just need to program the keypad to. The LED on the keypad will cease flashing and switch stable.
- Repeat steps 4 and 5 for every further distant management that you just need to program the keypad to.
- Substitute the duvet of the keypad and tighten the screws.
Your Liftmaster keypad is now programmed. Now you can use the keypad to open and shut your storage door.
Individuals Additionally Ask About Learn how to Program Liftmaster Keypad
How do I reset my Liftmaster keypad?
To reset your Liftmaster keypad, comply with these steps:
- Take away the duvet of the keypad by unscrewing the 2 screws that maintain it in place.
- Find the reset button on the again of the keypad. This button is often crimson or yellow.
- Press and maintain the reset button for 5 seconds. The LED on the keypad will begin to flash.
- Launch the reset button. The keypad will now be reset.
- Substitute the duvet of the keypad and tighten the screws.
How do I modify the code on my Liftmaster keypad?
To alter the code in your Liftmaster keypad, comply with these steps:
- Enter your present code into the keypad.
- Press the “#” key.
- Enter your new code into the keypad.
- Press the “#” key once more.
- The keypad will now be reprogrammed together with your new code.
How do I troubleshoot my Liftmaster keypad?
In case you are having bother together with your Liftmaster keypad, attempt the next troubleshooting suggestions:
- Be sure that the batteries are contemporary.
- Test the wiring connections on the again of the keypad.
- Be sure that the keypad is correctly programmed.
- You probably have tried the entire above troubleshooting suggestions and your keypad remains to be not working, you might want to exchange it.
