Do you’ve a Craftsman 20v battery that is not holding a cost in addition to it used to? Do not despair; you might be able to reserve it! With a bit of care and a spotlight, you’ll be able to lengthen the lifetime of your battery and hold your instruments operating sturdy. On this article, we’ll offer you complete directions on the right way to save a 20v Craftsman battery. We’ll cowl the whole lot from troubleshooting widespread issues to performing a full battery reconditioning. So whether or not your battery is barely sluggish or utterly useless, learn on for all the data it’s good to get it again up and operating.
One of the vital widespread causes for a Craftsman 20v battery to lose its cost is sulfation. Sulfation happens when lead sulfate crystals construct up on the battery’s plates. These crystals can block the move of electrical energy, decreasing the battery’s capability. To take away sulfation, you should use a battery desulfator. A battery desulfator is a tool that sends a high-frequency electrical pulse by the battery. This pulse helps to interrupt down the lead sulfate crystals and restore the battery’s capability. One other option to take away sulfation is to carry out a battery reconditioning. A battery reconditioning is a technique of charging and discharging the battery a number of instances. This course of helps to interrupt down the lead sulfate crystals and restore the battery’s capability.
In case your Craftsman 20v battery is totally useless, it’s possible you’ll want to switch the cells. Changing the cells is a comparatively easy course of, nevertheless it does require some primary soldering abilities. Upon getting changed the cells, your battery needs to be nearly as good as new. By following these easy steps, it can save you your Craftsman 20v battery and hold your instruments operating sturdy. So do not hand over in your battery simply but; give it a strive, and it’s possible you’ll be stunned at how straightforward it’s to convey it again to life.
Cleansing and Inspecting Contacts
Battery contacts can develop into soiled or corroded over time, which may intervene with charging. To scrub the contacts, use a cotton swab dipped in rubbing alcohol. Gently scrub the contacts till they’re clear and glossy.
Inspecting for Harm
As soon as the contacts are clear, examine them for any injury. Search for any cracks, breaks, or different injury that might forestall the battery from charging correctly. In case you discover any injury, you have to to switch the battery.
Troubleshooting Charging Points
If you’re nonetheless having bother charging your Craftsman 20V battery, there are a couple of different issues you’ll be able to strive:
– Ensure that the charger is plugged right into a working outlet.
– Attempt utilizing a special charger.
– Test the battery terminals to make it possible for they’re clear and freed from corrosion.
– In case you have tried the entire above and you’re nonetheless having bother charging your battery, it’s possible you’ll have to contact Craftsman customer support.
| Symptom | Doable Trigger | Resolution |
|---|---|---|
| Battery is not going to cost | Soiled or corroded contacts | Clear the contacts with rubbing alcohol. |
| Battery costs slowly | Weak charger | Attempt utilizing a special charger. |
| Battery doesn’t maintain a cost | Broken battery | Substitute the battery. |
Deep Discharging for Prolonged Life
Leaving a battery in a discharged state can result in sulfation, a course of the place lead sulfate crystals kind on the battery’s plates, decreasing its capability. To forestall this, it is essential to keep away from deep discharging your Craftsman 20v battery. Intention to maintain the battery stage above 20% earlier than recharging.
In case you by chance deep discharge your battery, do not panic. There are steps you’ll be able to take to get well it:
1. Cost the Battery
Join the battery to a charger instantly to forestall additional sulfation.
2. Discharge the Battery
As soon as the battery is absolutely charged, discharge it to 10-20% of its capability. Use a light-weight load or a battery discharge software to steadily drain the battery.
3. Recharge the Battery
Recharge the battery to its full capability. This course of helps dissolve the lead sulfate crystals and restore the battery’s capability.
4. Repeat Steps 2-3
Repeat steps 2 and three a couple of instances to totally desulfate the battery and lengthen its lifespan.
5. Upkeep
To forestall deep discharge injury sooner or later, comply with these upkeep ideas:
| Tip | Description |
|---|---|
| Retailer Correctly | Retailer the battery in a cool, dry place with a average temperature vary. |
| Common Use | Usually use the battery to maintain it energetic and stop sulfation. |
| Keep away from Overcharging | Unplug the charger as soon as the battery is absolutely charged to forestall overcharging. |
Avoiding Overcharging and Overdischarging
Overcharging and overdischarging can considerably cut back the lifespan of a 20v Craftsman battery. To keep away from these points, comply with these tips:
Overcharging
- Don’t depart the battery on the charger for prolonged durations after it’s absolutely charged.
- Use the unique Craftsman charger or a appropriate charger designed for 20v Craftsman batteries.
- Keep away from charging the battery in excessive temperatures (under freezing or above 120°F).
Overdischarging
- Keep away from operating the battery utterly flat. When the battery is low, recharge it promptly.
- If the battery does develop into overdischarged, let it cool for half-hour earlier than making an attempt to recharge it.
- Overdischarging can completely injury the battery cells, so you will need to monitor the battery stage and recharge it recurrently.
Storage
When storing a 20v Craftsman battery, think about the next components:
- Retailer the battery in a cool, dry place.
- Keep away from storing the battery in excessive temperatures (under freezing or above 120°F).
- Don’t retailer the battery for prolonged durations (over 3 months) with out charging it.
Following these tips will assist lengthen the lifespan of your 20v Craftsman battery and guarantee optimum efficiency.
Correct Storage and Temperature Administration
Storage Surroundings
Retailer batteries in a cool, dry place at a average temperature (ideally between 50-70°F). Keep away from excessive temperatures (under freezing or above 100°F) or environments with excessive humidity or direct daylight.
| Storage Temperature | Affect |
|---|---|
| Beneath freezing | Harm to battery cells |
| Above 100°F | Decreased battery life |
Prolonged Storage
For prolonged storage durations (over 3 months), partially discharge batteries to 40-60% capability earlier than storing. This minimizes self-discharge and extends battery life. Retailer batteries in a cool, dry atmosphere with a temperature between 32-50°F.
Temperature Administration throughout Use and Charging
Don’t use or cost batteries when they’re extraordinarily scorching or chilly (under freezing or above 100°F). Utilizing batteries in excessive temperatures can injury cells and cut back battery life. Permit batteries to chill or heat to a average temperature earlier than use or charging
Recycling and Disposal Choices
What to Do with Outdated Craftsman Batteries:
-
Recycle: Essentially the most environmentally pleasant possibility is to recycle previous Craftsman batteries. You’ll be able to drop them off at most {hardware} shops or residence enchancment facilities that settle for batteries for recycling.
-
Dispose: In case you can’t recycle your batteries, get rid of them correctly. Place them in a sealed plastic bag or container and label them "hazardous waste." Don’t put them in your common trash can.
Native Recycling and Disposal Choices:
To search out recycling and disposal choices close to you, go to:
- Earth911: https://earth911.com/recycling-guide/how-to-recycle-batteries/
- Call2Recycle: https://www.call2recycle.org/locator/
8. Craftsman Battery Recycling Program:
Black & Decker, the guardian firm of Craftsman, has a battery recycling program that accepts all Craftsman 20V batteries, no matter situation. To take part in this system:
- Go to the Black & Decker web site: https://www.blackanddecker.com/en-us/customer-service/battery-recycling
- Enter your ZIP code to discover a close by recycling location
- Convey your previous batteries to the recycling location and drop them off
The recycling program is free and open to the general public. By collaborating, you’ll be able to assist hold previous batteries out of landfills and stop them from harming the atmosphere.
Different Disposal Issues:
- Don’t: Incinerate or burn batteries. This may launch dangerous toxins.
- Don’t: Eliminate batteries in waterways or on the bottom. This may contaminate groundwater and soil.
- Don’t: Combine various kinds of batteries collectively. This may trigger a chemical response that may be hazardous.
Utilizing Battery Testers for Diagnostics
Battery testers are important instruments for diagnosing Craftsman 20v batteries. They supply fast and correct readings of the battery’s voltage, capability, and inside resistance.
Kinds of Battery Testers
There are two important varieties of battery testers:
- Analog Testers: Use a needle to point the battery’s voltage.
- Digital Testers: Present a digital readout of the battery’s voltage, capability, and inside resistance.
Methods to Use a Battery Tester
To make use of a battery tester, comply with these steps:
- Join the Tester: Join the tester to the battery’s terminals.
- Observe the Readings: Word the tester’s readings for voltage, capability, and inside resistance.
- Interpret the Outcomes: Evaluate the readings to the producer’s specs to find out the battery’s situation.
Frequent Battery Tester Readings
| Studying | Interpretation |
|---|---|
| Voltage | Signifies the battery’s cost stage. |
| Capability | Signifies the battery’s capability to carry a cost. |
| Inside Resistance | Signifies the resistance of the battery’s inside parts. |
Troubleshooting with Battery Testers
Battery testers might help troubleshoot widespread Craftsman 20v battery points:
- Low Voltage: Signifies the battery is discharged or has a defective cell.
- Low Capability: Signifies the battery has misplaced a few of its capability to carry a cost.
- Excessive Inside Resistance: Signifies the battery’s inside parts are degrading.
- Intermittent Readings: Signifies a unfastened connection or a broken battery cell.
Methods to Save a 20V Craftsman Battery
20V Craftsman batteries are designed to final for a number of years, however even one of the best batteries finally begin to lose their capability. In case you discover that your Craftsman battery just isn’t holding a cost in addition to it used to, there are some things you are able to do to attempt to revive it.
First, strive cleansing the battery terminals. Over time, grime and particles can construct up on the terminals, which may forestall the battery from making a superb reference to the software. To scrub the terminals, use a comfortable brush or a cotton swab dipped in rubbing alcohol. Make sure you permit the terminals to dry utterly earlier than reconnecting the battery.
If cleansing the terminals doesn’t remedy the issue, you’ll be able to strive resetting the battery. To do that, take away the battery from the software and insert it right into a charger. As soon as the battery is absolutely charged, take away it from the charger and permit it to take a seat for a couple of minutes. Then, reinsert the battery into the software and take a look at utilizing it once more.
If neither of those strategies works, it’s possible you’ll want to switch the battery. Craftsman batteries can be found at most residence enchancment shops. When changing the battery, you’ll want to select one that’s the similar voltage and capability as the unique battery.
Folks Additionally Ask
How do I do know if my Craftsman battery is dangerous?
There are a couple of indicators that may point out that your Craftsman battery is dangerous. These embrace:
- The battery doesn’t maintain a cost in addition to it used to
- The battery takes longer to cost
- The battery will get scorching when it’s being charged or used
- The battery leaks or bulges
In case you see any of those indicators, you will need to change the battery as quickly as potential.
Can I recondition a Craftsman battery?
Sure, it’s potential to recondition a Craftsman battery. Nevertheless, you will need to be aware that this isn’t all the time profitable. To recondition a battery, you have to to make use of a battery reconditioner. These units can be found at most residence enchancment shops.
To recondition a battery, comply with these steps:
- Join the battery to the battery reconditioner
- Set the reconditioner to the right voltage and capability in your battery
- Begin the reconditioning course of
- The reconditioning course of can take a number of hours
- As soon as the method is full, take away the battery from the reconditioner and permit it to chill
