Changing the freezer fan motor on a Whirlpool fridge might appear to be a frightening process, however with the suitable instruments and steering, it is a manageable DIY restore. Whether or not your fridge is making extreme noise, not cooling correctly, or experiencing different points, a defective freezer fan motor may very well be the perpetrator. This complete information will stroll you thru the step-by-step technique of changing the freezer fan motor in your Whirlpool fridge, making certain you restore optimum efficiency and save on pricey repairs.
Earlier than embarking on the substitute course of, it is essential to collect the mandatory instruments and supplies. You may want a screwdriver, a pair of pliers, a nut driver or wrench, a substitute freezer fan motor that’s suitable together with your Whirlpool fridge mannequin, and a flashlight for illuminating dimly lit areas. Moreover, keep in mind to unplug the fridge from its energy supply earlier than beginning any work for security causes.
After getting all the things you want, find the freezer fan motor contained in the freezer compartment. In most Whirlpool fridges, the freezer fan motor is located behind the rear panel of the freezer. To entry it, you will have to take away the screws holding the panel in place and punctiliously elevate it off. As soon as the rear panel is eliminated, it’s best to see the freezer fan motor, which is usually connected to the again wall of the freezer compartment. Disconnect {the electrical} connector from the fan motor and use pliers or a wrench to loosen and take away the mounting bolts. Then, elevate out the outdated freezer fan motor and substitute it with the brand new one. Securely tighten the mounting bolts and reconnect {the electrical} connector. Lastly, reattach the rear panel and plug the fridge again into its energy supply.
Figuring out the Freezer Fan Motor
The freezer fan motor is answerable for circulating chilly air all through the freezer compartment. If the fan motor fails, the freezer will be unable to keep up a chilly temperature and meals might spoil. There are a number of methods to determine the freezer fan motor:
- Find the freezer compartment. The freezer compartment is usually positioned on the prime of the fridge.
- Open the freezer door. The freezer fan motor is often positioned behind the freezer compartment.
- Search for a small, spherical motor with a fan blade connected to it. The freezer fan motor is usually mounted on the again wall of the freezer compartment.
If you’re unable to find the freezer fan motor, you possibly can seek the advice of the proprietor’s guide to your fridge. The proprietor’s guide will present particular directions on the best way to find the freezer fan motor.
After getting positioned the freezer fan motor, you possibly can examine to see whether it is working correctly. To do that, merely unplug the fridge and take away the freezer fan motor. If the fan blade doesn’t spin freely, the freezer fan motor is probably going faulty and can must be changed.
Here’s a desk summarizing the steps for figuring out the freezer fan motor:
| Step | Description |
|---|---|
| 1 | Find the freezer compartment. |
| 2 | Open the freezer door. |
| 3 | Search for a small, spherical motor with a fan blade connected to it. |
| 4 | If you’re unable to find the freezer fan motor, seek the advice of the proprietor’s guide to your fridge. |
Gathering the Obligatory Instruments and Supplies
To make sure a easy and profitable restore course of, it is essential to collect all the mandatory instruments and supplies earlier than you start. Here is a complete checklist of what you will want:
Instruments:
• Screwdriver (Phillips and flathead)
• Wrench or socket set
• Pliers
• Gloves
• Security glasses
• Electrical tape
Supplies:
• Alternative freezer fan motor (suitable together with your Whirlpool fridge mannequin)
• Wire connectors or crimp terminals
• Warmth shrink tubing or electrical tape
Detailed Information to Instruments:
| Instrument | Description |
|---|---|
| Screwdriver (Phillips and flathead) | For eradicating screws holding freezer panel, fan motor, and electrical connections |
| Wrench or socket set | For loosening or tightening bolts or nuts securing the freezer fan motor |
| Pliers | For gripping and slicing wires throughout electrical connections |
Disconnecting the Fridge
Security First
Earlier than starting any work, unplug the fridge. It is usually vital to show off the water provide to the ice maker, if relevant. If you’re not comfy performing this process, please contact a certified equipment restore technician.
Transferring the Fridge
As soon as the fridge is unplugged, you will want to maneuver it away from the wall. Make sure to safe the doorways with tape or bungee cords to stop them from swinging open. If you’re having issue transferring the fridge, you could have to ask for help from a good friend or member of the family.
Accessing the Freezer Fan Motor
Find the freezer fan motor, which is often positioned behind the again panel of the freezer compartment. To entry the fan motor, you will want to take away the screws that maintain the again panel in place. As soon as the again panel is eliminated, it is possible for you to to see the freezer fan motor.
Disconnect the wires from the freezer fan motor. Make sure to label the wires so as to simply reconnect them later. As soon as the wires are disconnected, you possibly can take away the freezer fan motor from the fridge.
When dealing with electrical parts, remember to use warning and keep away from touching any uncovered wires. If you’re not comfy performing this process, please contact a certified equipment restore technician.
| Instruments Wanted | Supplies Wanted |
|---|---|
| Phillips screwdriver | New freezer fan motor |
| Flathead screwdriver | Wire nuts (if obligatory) |
| Adjustable wrench | Electrical tape (if obligatory) |
Eradicating the Freezer Prime Panel
To take away the freezer prime panel, you will want a Phillips head screwdriver. Start by unplugging the fridge from the ability outlet. Then, open the freezer door and take away the meals and cabinets. Subsequent, find the screws which might be holding the highest panel in place. There are usually two screws positioned on the entrance of the panel and two screws positioned behind the panel. Take away the screws and punctiliously elevate the highest panel off the fridge.
Disconnecting the Electrical Wires
After getting eliminated the highest panel, you will want to disconnect {the electrical} wires which might be related to the freezer fan motor. There are usually two wires, a black wire and a white wire, which might be related to the motor. Use a pair of pliers to softly pull the wires off of the motor terminals. Watch out to not injury the wires.
Eradicating the Freezer Fan Motor
Now, you possibly can take away the freezer fan motor. The motor is usually held in place by two or three screws. Take away the screws and punctiliously elevate the motor out of the fridge. Watch out to not injury the motor or the encompassing parts.
Putting in the New Freezer Fan Motor
To put in the brand new freezer fan motor, merely reverse the steps that you just took to take away the outdated motor. First, insert the brand new motor into the fridge and safe it with the screws. Then, join {the electrical} wires to the motor terminals. Lastly, substitute the freezer prime panel and safe it with the screws.
After getting put in the brand new freezer fan motor, plug the fridge again into the ability outlet and switch it on. The freezer fan motor ought to begin working and the freezer ought to start to chill down.
Detaching the Freezer Fan Meeting
Eradicating the freezer fan meeting requires a sequential process to make sure protected and efficient completion of the duty. Here is an in depth information with further steps to facilitate the method:
- Unplug the fridge: Earlier than performing any work, unplug the fridge to stop any electrical hazards.
- Take away the freezer cabinets: Take out all of the cabinets and drawers contained in the freezer to offer higher entry to the fan meeting.
- Disconnect the ice maker: If the fridge has an ice maker, find it and disconnect it by unplugging the wires or turning off the water valve.
- Unscrew the fan meeting cowl: The fan meeting cowl is often connected with screws. Establish and take away these screws to entry the fan meeting.
- Unplug the fan motor: Find the fan motor and gently unplug its wire connector. Notice the place of the connector for straightforward reattachment later.
- Take away the mounting screws: The fan meeting is usually secured by mounting screws. Find and take away these screws to detach the meeting.
- Carry the fan meeting out: Rigorously elevate the fan meeting out of the freezer compartment. It could require some mild prying if it is caught.
Desk: Fan Meeting Mounting Screw Places
| Whirlpool Fridge Mannequin | Screw Places |
|---|---|
| WRT318FZDW00 | Prime and backside of meeting |
| WRF560SMHZ00 | Sides of meeting |
| WRF757SDHZ00 | Front and back of meeting |
Further Suggestions:
- Take footage of the meeting and its connections earlier than disassembling for simpler reassembly.
- If the fan motor is seized or broken, it could require substitute reasonably than reattachment.
- As soon as the fan meeting is indifferent, proceed with cleansing the compartment or changing another parts as wanted.
Eradicating the 旧 Freezer Fan Motor
1. Unplug the fridge from the ability outlet.
2. Take away the freezer door by unscrewing the hinge screws. Carry the door straight as much as take away it.
3. Find the freezer fan motor. It’s often mounted on the again wall of the freezer compartment.
4. Disconnect {the electrical} wires from the fan motor. Notice the wire colours so as to reconnect them appropriately later.
5. Take away the mounting screws that maintain the fan motor in place.
6. Rigorously take away the fan motor from the freezer compartment. Keep away from touching the fan blades, as they’re sharp.
| Instruments Wanted: | Supplies Wanted: |
|---|---|
| Screwdriver | Alternative freezer fan motor |
| Pliers | Electrical tape |
| Wire cutters |
Notice: If you’re not comfy engaged on electrical home equipment, it’s best to name a certified equipment restore technician.
Putting in The New Freezer Fan Motor
7. Putting in the New Freezer Fan Motor
Now that the brand new freezer fan motor is in your possession, it’s time to set up it. Observe these steps rigorously:
- Find {the electrical} connector on the brand new freezer fan motor.
- Align {the electrical} connector on the brand new freezer fan motor with {the electrical} connector on the fridge.
- Push {the electrical} connector on the brand new freezer fan motor onto {the electrical} connector on the fridge till it clicks into place.
- Find the mounting bracket on the brand new freezer fan motor.
- Align the mounting bracket on the brand new freezer fan motor with the mounting bracket on the fridge.
- Insert the screws into the mounting bracket on the brand new freezer fan motor and tighten them till the fan motor is safe.
- Plug the fridge again into {the electrical} outlet.
- Activate the fridge and ensure that the brand new freezer fan motor is working correctly.
8. Troubleshooting
If the brand new freezer fan motor isn’t working correctly, there are some things you are able to do to troubleshoot the issue:
- Verify {the electrical} connection between the brand new freezer fan motor and the fridge.
- Make it possible for the brand new freezer fan motor is securely mounted to the fridge.
- Contact a certified equipment restore technician for help.
- Phillips head screwdriver
- Adjustable wrench
- Socket wrench
- Flathead screwdriver
- Unplug the fridge earlier than beginning any work.
- Put on gloves and security glasses.
- Watch out to not reduce your self on any sharp edges.
- Plug the fridge again into the outlet.
- Activate the fridge.
- Verify that the freezer fan is working.
- If the freezer fan isn’t working, examine the next:
- The fan is correctly related.
- The fan motor isn’t obstructed.
- The fridge is getting energy.
- If the freezer fan continues to be not working, you could want to switch the fan motor.
- Unplug the fridge. Earlier than you start, remember to unplug the fridge from the ability outlet. It will assist to stop any electrical shock hazards.
- Find the freezer fan motor. The freezer fan motor is usually positioned behind the freezer compartment, behind the evaporator coils. To entry the motor, you will have to take away the again panel of the freezer.
- Disconnect the wires from the motor. As soon as you have positioned the motor, disconnect the wires from the terminals. Make sure to observe which wire goes to which terminal so as to reconnect them appropriately later.
- Take away the mounting screws. The motor is usually held in place by a number of mounting screws. Take away these screws and punctiliously elevate the motor out of the freezer compartment.
- Set up the brand new motor. Place the brand new motor within the freezer compartment and safe it with the mounting screws. Make sure to reconnect the wires to the terminals within the right order.
- Exchange the again panel of the freezer. As soon as the motor is put in, substitute the again panel of the freezer and plug the fridge again into the ability outlet.
- Ice buildup within the freezer compartment
- Heat temperatures within the freezer compartment
- Meals spoilage
Reattaching the Freezer Fan Meeting
8. Reattaching the freezer fan meeting requires a cautious strategy. Begin by inserting the fan motor into the fan housing, making certain it matches snugly. Safe the motor utilizing the screws supplied, tightening them firmly however not overtightening. Subsequent, reconnect the wiring harness to the fan motor by plugging it in securely. Verify the connections to make sure they’re correctly aligned and locked in place. To forestall any free connections, use electrical tape to insulate and safe the wires.
9. Mount the freezer fan meeting again into the fridge compartment by aligning it with the designated slots. Gently slide the meeting into place and safe it with the screws supplied. Be certain that the fan is positioned appropriately and that the blades aren’t obstructed. Make sure the meeting is securely mounted to stop any vibrations or noise throughout operation.
10. Double-check all connections and guarantee all the things is correctly secured. Examine the fan for any injury or free parts. Confirm that the fan blades spin freely whenever you manually rotate them. This step ensures the fan is working easily and can successfully flow into air throughout the freezer compartment.
Changing the Freezer Prime Panel
**1. Take away the ability twine.** Unplug the fridge from the ability outlet.
**2. Clear the freezer.** Take away all meals and ice from the freezer. It will make it simpler to maneuver the freezer prime panel.
**3. Open the freezer door.** Pull the freezer door open till it stops.
**4. Tilt the freezer door upward.** Carry the freezer door up barely so as to entry the freezer prime panel screws.
**5. Take away the freezer prime panel screws.** Use a screwdriver to take away the 2 screws that safe the freezer prime panel.
**6. Carry the freezer prime panel off.** Grip the freezer prime panel on either side and elevate it up and off the fridge.
**7. Find the freezer fan motor.** The freezer fan motor is positioned behind the freezer compartment. It’s often connected to the freezer evaporator coils.
**8. Disconnect the freezer fan motor wires.** Use a pair of needle-nose pliers to disconnect the 2 wires which might be related to the freezer fan motor.
**9. Take away the freezer fan motor mounting screws.** Use a screwdriver to take away the 4 screws that safe the freezer fan motor to the evaporator coils. **Notice:** The freezer fan motor is usually held in place by 4 screws, however some fashions might have extra or fewer screws. Seek advice from your fridge’s proprietor’s guide for particular directions.
Instruments You may Want
Security Precautions
Reconnecting the Fridge
After getting changed the freezer fan motor, it is time to reconnect the fridge. To do that:
| Half quantity | Description |
|---|---|
| WR60X10071 | Freezer fan motor |
After getting verified that the freezer fan is working, you possibly can shut the freezer door and revel in your newly repaired fridge!
Methods to Exchange Freezer Fan Motor on Whirlpool Fridge
A defective freezer fan motor may cause quite a lot of issues together with your Whirlpool fridge, together with ice buildup, heat temperatures, and even meals spoilage. For those who’re experiencing any of those points, it is vital to examine the freezer fan motor and substitute it if obligatory.
Changing the freezer fan motor on a Whirlpool fridge is a comparatively easy process that may be accomplished in about an hour. Here is a step-by-step information that will help you get began:
Individuals Additionally Ask About Methods to Exchange Freezer Fan Motor on Whirlpool Fridge
How do I do know if my freezer fan motor is dangerous?
There are a number of indicators that will point out that your freezer fan motor is dangerous. These embrace:
How a lot does it value to switch a freezer fan motor?
The fee to switch a freezer fan motor will range relying on the make and mannequin of your fridge. Nonetheless, you possibly can anticipate to pay between $50 and $150 for the half and labor.
Can I substitute the freezer fan motor myself?
Sure, you possibly can substitute the freezer fan motor your self should you’re comfy working with electrical home equipment. Nonetheless, should you’re unsure the best way to do it, it is best to name a certified equipment restore technician.
