On the subject of digital units, it’s all the time a good suggestion to discover ways to take them aside. For instance, in case your PS4 Slim is experiencing points, you would possibly have to open it as much as clear it or restore it. This information will present you how you can safely disassemble your PS4 Slim to be able to work on it.
Earlier than you begin, you will need to collect the instruments you will want. You’ll need a Phillips #0 screwdriver, a T8 Torx screwdriver, and a spudger. After getting your instruments, you possibly can start the disassembly course of. Be certain to maintain monitor of all of the screws you take away, as placing your PS4 Slim again collectively would require utilizing them once more.
First, you will want to take away the highest cowl of the PS4 Slim. To do that, use the Phillips #0 screwdriver to take away the screw that’s situated on the again of the console, subsequent to the facility port. As soon as the screw is eliminated, you possibly can elevate the highest cowl off of the console. Watch out to not injury the ribbon cable that connects the highest cowl to the motherboard.
Prepping for Disassembly
Important Instruments and Supplies
Earlier than embarking on the disassembly course of, collect the required instruments and supplies to make sure a clean and profitable operation. These embrace:
- Phillips #00 Screwdriver
- Torx T8 Safety Screwdriver
- Plastic Pry Instruments
- Isopropyl Alcohol (Non-compulsory)
- Cotton Swabs (Non-compulsory)
- Anti-Static Wrist Strap (Really helpful)
- Magnetic Screw Tray (Really helpful)
Security Precautions
Previous to disassembly, observe the next security precautions to attenuate the danger of harm or damage:
- Energy down and unplug the PlayStation 4 Slim.
- Put on an anti-static wrist strap to stop electrostatic discharge (ESD) injury.
- Work on a steady and well-lit floor.
- Keep away from touching delicate parts, such because the motherboard or laborious drive.
- Deal with screws rigorously and preserve them organized in a magnetic screw tray.
Floor Preparation
To make sure a clear and arranged workspace, the next floor preparation steps are really useful:
| Step | Description |
|---|---|
| 1 | Clear a spacious space in your work floor. |
| 2 | Lay down a clear material or anti-static mat to guard the work floor and PlayStation 4 Slim. |
| 3 | Arrange a Magnetic Screw Tray close by to retailer the screws you take away. |
| 4 | Place the PlayStation 4 Slim on the ready floor, the other way up. |
Eradicating the Entrance Casing
Start by rigorously flipping the PS4 Slim the other way up and resting it on a tender, clear floor. Find the three rubber toes on the underside of the console. Gently pry every one off utilizing a plastic pry instrument or your fingernails.
Subsequent, take away the 2 screws that have been hidden beneath the rubber toes. These screws are sometimes Phillips #0 screws. As soon as the screws are eliminated, the entrance casing might be lifted off. Grip the casing alongside the sides and gently pull it in the direction of you. There could also be some resistance from the clips that maintain the casing in place, nevertheless it ought to come off simply with somewhat effort.
Cautions When Eradicating the Casing
When eradicating the entrance casing, you’ll want to deal with it with care to keep away from damaging the clips or the plastic housing. If the casing doesn’t come off simply, don’t drive it. As an alternative, verify for any remaining screws or clips which will nonetheless be connected. It’s also essential to keep away from touching the circuit board contained in the console, as static electrical energy can injury the parts.
| Warning | Description |
|---|---|
| Keep away from forcing the casing | If the casing doesn’t come off simply, verify for remaining screws or clips. |
| Deal with with care | Keep away from damaging the clips or plastic housing. |
| Keep away from touching the circuit board | Static electrical energy can injury the parts. |
Accessing the Energy Provide
To entry the facility provide, you will have to take away the again cowl of the PS4 Slim. To do that, find the screw on the again of the console, slightly below the facility button. Use a Phillips head screwdriver to take away the screw. As soon as the screw is eliminated, you possibly can slide the again cowl off the console.
Eradicating the Energy Provide
As soon as the again cowl is eliminated, you will see the facility provide. It is held in place by 4 screws. Use a Phillips head screwdriver to take away the screws. As soon as the screws are eliminated, you possibly can elevate the facility provide out of the console.
Disconnecting the Energy Provide
As soon as the facility provide is eliminated, you will have to disconnect it from the console. To do that, find the facility connector on the again of the console. It is a white connector with two wires popping out of it. Use your fingers to squeeze the perimeters of the connector and pull it straight out of the console.
| Screw Location | Screw Sort |
|---|---|
| Again of the console, slightly below the facility button | Phillips head |
| Securing the facility provide | Phillips head |
Detaching the Onerous Drive
Detaching the laborious drive from a PS4 Slim requires some precision and care. Listed here are the detailed steps:
1. Energy Off and Unplug the PS4
Earlier than starting, make sure the PS4 is totally powered off and disconnected from any energy supply.
2. Find the Onerous Drive Bay
Flip the PS4 over and find the laborious drive bay on the underside. It is a rectangular opening coated by a detachable plate.
3. Take away the Onerous Drive Bay Plate
Utilizing a Philips #0 screwdriver, unscrew the screw holding the laborious drive bay plate in place. Gently elevate and take away the plate to reveal the laborious drive.
4. Disconnect the Onerous Drive
The laborious drive is linked to the PS4’s motherboard by way of a SATA cable and energy connector. Rigorously disconnect each cables from the laborious drive:
a. SATA Cable: Gently pull the SATA cable straight up from its connector on the laborious drive.
b. Energy Connector: Raise the small plastic tab on the facility connector and gently pull the connector straight up from the laborious drive.
5. Take away the Onerous Drive
As soon as disconnected, the laborious drive might be eliminated. Gently slide it out of the bay in the direction of the again of the PS4 and elevate it out.
Eradicating the Blu-ray Drive
Step 1: Energy Down and Unplug the PS4 Slim
Earlier than disassembling the console, guarantee it is powered off and disconnected from any energy supply.
Step 2: Take away the Prime Cowl
1. Slide the highest cowl towards the again of the console.
2. Raise the quilt off from the entrance edge.
Step 3: Disconnect the Blu-ray Drive Ribbon Cable
1. Find the ribbon cable connecting the Blu-ray drive to the motherboard.
2. Use a spudger or your fingernail to softly pry up the latch securing the cable.
3. Rigorously pull the ribbon cable straight out from its connector.
Step 4: Unscrew the Blu-ray Drive Mounting Screws
1. Take away the 2 screws securing the Blu-ray drive to the chassis.
2. Place the screws in a secure place to keep away from shedding them.
Step 5: Raise Out the Blu-ray Drive
| Warning: The Blu-ray drive could also be delicate. Deal with it with care. |
|---|
|
1. Gently elevate the drive straight up and out of the console. |
|
2. Keep away from touching the lens or optical parts to stop injury. |
|
3. Set the Blu-ray drive apart on a steady floor. |
Disconnecting the Cables
6. Eradicating the Energy Provide Unit
Disconnecting the cables requires cautious consideration to element. Comply with these steps to make sure the method is finished safely and accurately:
- Disconnect the facility cable: Find the facility wire linked to the again of the PS4 Slim. Gently grasp the plug and pull it straight out of the wall outlet.
- Unplug the info cable: Determine the HDMI cable or different information cable linked to the PS4 Slim’s entrance or again. Rigorously wiggle the cable side-to-side whereas pulling it out of the port.
- Take away the Ethernet cable: If an Ethernet cable is linked to the again of the PS4 Slim, unplug it by urgent down on the discharge tab and pulling the cable out.
- Disconnect the USB cables: Find and unplug any USB cables linked to the USB ports on the entrance or again of the PS4 Slim.
- Take away the auxiliary cables: Disconnect any further cables, corresponding to audio cables or optical cables, which may be linked to the PS4 Slim.
- Confirm all cables are disconnected: Take a second to double-check that each one cables have been disconnected from the PS4 Slim earlier than continuing to the following step.
Desk: Abstract of Cable Disconnection
| Cable Sort | Motion |
|---|---|
| Energy cable | Unplug from wall outlet |
| Knowledge cable (HDMI/different) | Unplug from PS4 Slim port |
| Ethernet cable | Press launch tab and unplug |
| USB cables | Unplug from PS4 Slim USB ports |
| Auxiliary cables (audio/optical) | Disconnect from PS4 Slim |
Lifting the Motherboard
As soon as the screws are eliminated, you possibly can elevate and take away the motherboard from the PS4 Slim. Nevertheless, it is essential to do that rigorously and keep away from placing any strain on different parts. Use each fingers to carry the perimeters of the motherboard and elevate it gently till the connectors on the underside are disengaged from the bottom.
Listed here are some further ideas for lifting the motherboard:
- Be certain the PS4 Slim is powered off and unplugged.
- Deal with the motherboard by the sides, avoiding touching the parts on the floor.
- Should you encounter any resistance when lifting the motherboard, verify to see if there are any cables or connectors which can be nonetheless connected.
- Don’t elevate the motherboard by the facility provide connector.
- Watch out to not bend or injury the motherboard.
As soon as the motherboard is lifted, you will want to disconnect the next cables from the underside of it:
| Connector | Description |
|---|---|
| Energy provide connector | Connects the motherboard to the facility provide. |
| Blu-ray drive connector | Connects the motherboard to the Blu-ray drive. |
| Onerous drive connector | Connects the motherboard to the laborious drive. |
| Fan connector | Connects the motherboard to the cooling fan. |
Now, elevate and take away the motherboard is now separated from the PS4 Slim base and is prepared for repairs or substitute.
Eradicating the Warmth Sink
As soon as the facility provide, laborious drive, and optical drive are eliminated, you can begin engaged on eradicating the warmth sink. This can be a essential step, as you want to watch out to not injury the fragile parts beneath.
Here is a step-by-step information on how you can take away the warmth sink:
1. Take away the screws holding the warmth sink to the motherboard.
There are sometimes 4 screws that maintain the warmth sink in place. Use a Phillips #0 screwdriver to take away these screws.
2. Rigorously elevate the warmth sink straight up.
Watch out to not bump or injury any of the parts on the motherboard when lifting the warmth sink.
3. Take away the thermal paste from the CPU and warmth sink.
Use a cotton swab or a paper towel soaked in isopropyl alcohol to scrub the outdated thermal paste from the CPU and warmth sink. Make sure to take away all the outdated paste, as this may assist guarantee good thermal contact between the CPU and the brand new warmth sink.
4. Apply new thermal paste to the CPU.
Use a small pea-sized quantity of thermal paste and apply it to the middle of the CPU. Watch out to not apply an excessive amount of thermal paste, as this may result in overheating.
5. Reinstall the warmth sink onto the CPU.
Rigorously align the warmth sink with the CPU and gently decrease it into place. Tighten the screws to safe the warmth sink to the motherboard.
6. Reconnect the facility cables to the motherboard.
Reconnect the facility cables that you simply eliminated earlier to energy the motherboard and the remainder of the parts.
7. Take a look at the PS4 Slim to verify it is working correctly.
As soon as you have reassembled the PS4 Slim, flip it on and check it to verify it is working correctly. If the PS4 Slim does not activate or does not work correctly, double-check your connections and guarantee that all the parts are seated accurately.
8. Troubleshooting ideas
Should you’re having bother eradicating the warmth sink, listed here are just a few troubleshooting ideas:
| Downside | Answer |
|---|---|
| The screws are caught and will not come out. | Attempt utilizing a screwdriver with a greater grip, or strive utilizing a small quantity of penetrating oil to loosen the screws. |
| The warmth sink is caught to the CPU and will not come off. | Attempt gently rocking the warmth sink backwards and forwards to loosen it. You can even strive utilizing a warmth gun to warmth up the warmth sink, which can assist loosen the thermal paste. |
| I unintentionally broken the CPU or the warmth sink. | Should you’ve broken the CPU or the warmth sink, you will want to interchange it. You should buy substitute elements from Sony or from a third-party retailer. |
Detaching the CPU and GPU
The CPU and GPU are situated on the motherboard of the PS4 Slim. To detach them, you will want to:
- Take away the screws that safe the motherboard to the chassis.
- Rigorously elevate the motherboard out of the chassis.
- Find the CPU and GPU on the motherboard. They’re massive, sq. chips with heatsinks connected.
- Use a spudger or different pry instrument to softly pry the heatsinks off of the CPU and GPU.
- As soon as the heatsinks are eliminated, you will note the CPU and GPU dies. They’re small, sq. chips with gold-plated contacts.
- Use a pair of tweezers to rigorously elevate the CPU and GPU dies out of their sockets.
- Place the CPU and GPU dies in a secure place, corresponding to an anti-static bag.
- Reassemble the PS4 Slim in reverse order.
Be aware:
The CPU and GPU are delicate parts. Make sure to deal with them with care to keep away from damaging them.
| Device | Objective | |
|---|---|---|
| ✔ | Phillips #0 screwdriver | Take away the screws that safe the motherboard to the chassis. |
| ✔ | Spudger | Pry the heatsinks off of the CPU and GPU. |
| ✔ | Tweezers | Raise the CPU and GPU dies out of their sockets. |
Reassembly
After getting cleaned the parts, it is time to reassemble the PS4 Slim. Comply with these steps in reverse order to place every part again collectively:
- Insert the laborious drive again into its bay.
- Screw the laborious drive again into place.
- Join the facility provide to the motherboard.
- Safe the facility provide with the 2 screws.
- Join the fan to the motherboard.
- Safe the fan with the 4 screws.
- Place the optical drive again into the console.
- Safe the optical drive with the screws.
- Join the ribbon cables and energy connector to the motherboard.
- Place the highest cowl again on the console.
- Safe the highest cowl with the screws.
- Flip the console over and place it on its toes.
Testing
After getting reassembled the PS4 Slim, it is time to check it to verify it is working correctly. Comply with these steps:
- Plug the console into an influence outlet.
- Insert a recreation disc into the optical drive.
- Activate the console.
- Anticipate the sport to load.
- Begin enjoying the sport.
If the console is working correctly, it is best to be capable of play the sport with none issues. Should you encounter any points, you could have to seek the advice of an expert for assist.
How To Take Aside Ps4 Slim
To take aside a PS4 Slim, you will want the next instruments:
- Phillips #0 screwdriver
- Torx T8 screwdriver
- Plastic spudger
- Tweezers (optionally available)
After getting gathered your instruments, comply with these steps:
1. Unplug the PS4 Slim from the facility outlet and switch it off.
2. Place the PS4 Slim on a flat floor.
3. Use the Phillips #0 screwdriver to take away the 4 screws on the underside of the PS4 Slim.
4. Raise the highest cowl of the PS4 Slim off.
5. Use the Torx T8 screwdriver to take away the screw that’s situated on the proper facet of the PS4 Slim, close to the facility button.
6. Raise the plastic cowl off of the PS4 Slim.
7. Use the tweezers to take away the ribbon cable that’s linked to the facility button.
8. Use the plastic spudger to disconnect the opposite ribbon cables which can be linked to the motherboard.
9. Raise the motherboard out of the PS4 Slim.
10. Use the Torx T8 screwdriver to take away the screws which can be holding the warmth sink in place.
11. Raise the warmth sink off of the PS4 Slim.
12. Use the plastic spudger to disconnect the ribbon cable that’s linked to the fan.
13. Raise the fan out of the PS4 Slim.
14. The PS4 Slim is now disassembled.
