Foam cannons are a vital software for any automotive fanatic, and the Selkie Foam Cannon is without doubt one of the hottest available on the market. It is easy to make use of and produces a thick, wealthy foam that may assist you to clear your automotive shortly and successfully. Nevertheless, in the event you’re not acquainted with foam cannons, you might not know the best way to take it aside to wash it or exchange elements. This information will present you the best way to do it in a couple of easy steps.
Earlier than you start, collect your instruments. You will have a Phillips head screwdriver, a flat head screwdriver, and a pair of pliers. After getting your instruments, comply with these steps to disassemble your Selkie Foam Cannon:
1. Take away the nozzle from the cannon. To do that, merely unscrew the nozzle by turning it counterclockwise.
2. Take away the filter from the cannon. To do that, use the flat head screwdriver to pry the filter out of the cannon.
3. Take away the mesh display screen from the cannon. To do that, use the pliers to drag the mesh display screen out of the cannon.
Gathering Mandatory Instruments
Earlier than you start disassembling your Selkie Foam Cannon, it is essential to assemble the required instruments to make sure a easy and environment friendly course of. Here is a complete listing of the advisable instruments:
Security Gear:
| Merchandise | Function |
|---|---|
| Gloves | Shield palms from chemical compounds |
| Security Glasses | Forestall eye accidents from flying particles |
Disassembly Instruments:
| Merchandise | Function |
|---|---|
| Phillips Screwdriver | Unscrew Phillips head screws |
| Flathead Screwdriver | Pry aside elements, equivalent to o-rings |
| Allen Key | Take away screws that require an Allen key |
| Needle Nostril Pliers | Grip and take away small elements, equivalent to O-rings |
Cleansing and Upkeep Instruments:
| Merchandise | Function |
|---|---|
| Delicate Fabric | Wipe away grime and particles |
| Lubricant | Apply to O-rings and shifting elements for easy operation |
| Water Container | For rinsing and cleansing elements |
Security Precautions to Take into account
Previous to dismantling your Selkie Foam Cannon, it is important to look at sure security measures to forestall any potential hazards or accidents.
1. Disconnect from Water Supply
Earlier than trying to disassemble the froth cannon, be sure that it’s disconnected from the water supply. This can stop any unintentional water discharge or spraying throughout the disassembly course of.
2. Put on Protecting Gear
When dealing with the froth cannon elements, it is advisable to put on acceptable protecting gear, equivalent to gloves, security glasses, and a masks. That is particularly essential if the froth cannon has been used with harsh chemical compounds or cleaners, as these could emit dangerous fumes or residue. The next desk gives a extra detailed breakdown of the advisable protecting gear:
| Protecting Gear | Function |
|---|---|
| Gloves | Shield palms from chemical compounds, abrasions, and sharp edges |
| Security Glasses | Protect eyes from flying particles, chemical compounds, and splashes |
| Masks | Forestall inhalation of dangerous fumes or particles |
3. Guarantee Steady Atmosphere
Choose a secure and well-lit atmosphere for disassembling the froth cannon. Keep away from working in areas with extreme wind or moisture, as these situations could make the method more difficult and doubtlessly hazardous.
Disconnecting the Cannon from Water Provide
To soundly detach the Selkie Foam Cannon out of your strain washer, comply with these steps:
- Shut off the water provide: Flip off the tap or valve supplying water to the strain washer.
- Launch the strain: Squeeze the set off on the strain washer wand to launch any remaining water strain.
-
Disconnect the Cannon:
Technique Description Fast-connect becoming: Find the quick-connect becoming on the cannon’s finish and pull it straight again to disconnect. Guarantee to use agency strain to launch the coupling. Threaded connection: Unscrew the threaded collar connecting the cannon to the strain washer’s wand by turning it counterclockwise. Use a wrench or pliers for a safe grip. - Examine the connections: Examine the becoming or threads for indicators of harm or put on earlier than reattaching the cannon.
Eradicating the Exterior Shell
1. Take away the Nozzle
Find the nozzle connected to the tip of the froth cannon. Twist the nozzle counterclockwise to take away it.
2. Unscrew the Base
Establish the bottom of the froth cannon, which connects it to the strain washer hose. Utilizing an adjustable wrench, loosen and take away the bottom by turning it counterclockwise.
3. Pull Aside the Physique
Gently pull the physique of the froth cannon other than the bottom. The physique ought to slide off simply, revealing the inner elements.
4. Disassemble the Mixing Chamber
Find the blending chamber, which is the cylindrical element contained in the physique of the froth cannon. It consists of:
| Element | Description |
|---|---|
| Mixing Ball | A small, spherical system that creates turbulence and helps combine the cleaning soap and water. |
| Mixing Tube | A hole cylinder that homes the blending ball and directs the answer to the nozzle. |
| O-Ring | A rubber ring that creates a seal between the blending chamber elements. |
To disassemble the blending chamber:
- Take away the blending ball by gently pulling it out of the blending tube.
- Pull aside the blending tube from the physique of the froth cannon.
- Examine and take away any O-rings or seals from the blending chamber elements.
Detaching the Nozzle
The nozzle is the a part of the froth cannon that dispenses the froth. To detach the nozzle, first unscrew the locking ring that’s situated on the base of the nozzle. As soon as the locking ring is free, you possibly can pull the nozzle straight out of the froth cannon.
Step-by-Step Directions for Detaching the Nozzle
| Step | Description |
|---|---|
| 1 | Unscrew the locking ring on the base of the nozzle. |
| 2 | Pull the nozzle straight out of the froth cannon. |
Disassembling the Fast Join Becoming
The short join becoming on a Selkie foam cannon is a small, plastic piece that connects the froth cannon to the strain washer. It’s designed to be fast and straightforward to take away, in an effort to simply clear the froth cannon or swap it out for a distinct one. To disassemble the fast join becoming, comply with these steps:
1. Find the fast join becoming on the froth cannon. It’s normally situated on the base of the froth cannon, the place it connects to the strain washer hose.
2. Grip the fast join becoming with one hand and the froth cannon with the opposite hand.
3. Pull the fast join becoming immediately from the froth cannon. It ought to come off simply.
4. If the fast join becoming is caught, you possibly can strive utilizing a pair of pliers to softly pry it off. Watch out to not harm the becoming.
5. As soon as the fast join becoming is eliminated, you possibly can clear it with cleaning soap and water. You can too lubricate the becoming with a silicone-based lubricant to assist it transfer extra simply.
6. Insert New Gasket And Grease:
– Inside the fast join becoming, you will discover a small, rubber gasket.
– This gasket helps to create a seal between the becoming and the strain washer hose.
– If the gasket is broken or worn, it may well trigger the becoming to leak.
– Whenever you reassemble the becoming, you’ll want to examine the gasket and exchange it if mandatory.
– As soon as you have changed the gasket, apply a small quantity of grease to the within of the becoming.
– This can assist to lubricate the becoming and make it simpler to make use of.
7. To reassemble the fast join becoming, merely insert the becoming into the froth cannon and push it on till it clicks into place.
Taking Aside the Cleaning soap Regulator
1. Unscrew the Cleaning soap Regulator Knob
Find the cleaning soap regulator knob on the facet of the froth cannon. It’s normally a small, spherical knob with a deal with.
2. Take away the O-Ring
As soon as the knob is eliminated, you will note a small O-ring contained in the cleaning soap regulator housing. Fastidiously take away the O-ring by hand.
3. Take away the Regulator Spring
Beneath the O-ring, you will discover a small spring. Use a pair of needle-nose pliers to softly take away the spring.
4. Take away the Regulator Valve
As soon as the spring is eliminated, the regulator valve will be pulled out of the housing. It’s a small, cylindrical piece with a gap within the middle.
5. Rinse and Dry the Valve and Housing
Rinse the regulator valve and the housing with clear water to take away any cleaning soap residue. Enable them to dry utterly earlier than reassembling.
6. Lubricate the O-Ring and Spring
Apply a small quantity of lubrication to the O-ring and spring. This can assist to forestall put on and tear and guarantee easy operation.
7. Reassemble the Regulator
Place the spring again into the housing, then slide the regulator valve over the spring. Insert the O-ring into the groove on the regulator valve. Lastly, screw the cleaning soap regulator knob again into place.
Extra Suggestions for Taking Aside a Selkie Foam Cannon
- Take photos of every step throughout disassembly to facilitate reassembly.
- Use the supplied torque wrench to correctly tighten the cleaning soap regulator knob.
- For those who encounter any issue, don’t hesitate to contact Selkie buyer assist for help.
Separating the Lance and Housing
As soon as you have disassembled the quick-connect becoming, it is time to separate the lance from the housing. This course of requires a bit extra power than the earlier step.
Step 8: Twist and Pull
Grasp the lance firmly with one hand and the housing with the opposite. Twist the lance counterclockwise whereas pulling it away from the housing. The joint ought to break aside with somewhat effort. If mandatory, use a pair of pliers to softly pry the lance free.
| Step 8: Twist and Pull |
|---|
| Grasp the lance and housing firmly. |
| Twist the lance counterclockwise whereas pulling it away from the housing. |
| If mandatory, use pliers to pry the lance free. |
Cleansing and Inspecting Parts
As soon as the cannon is disassembled, it is essential to completely clear all of the elements to take away any grime, particles, or residue. This can assist to make sure that the cannon features correctly when reassembled. Use a gentle detergent and heat water to wash the elements, and you’ll want to rinse them completely earlier than drying them.
As soon as the elements are clear, it is a good suggestion to examine them for any harm or put on and tear. Pay specific consideration to the o-rings, as these can simply turn into broken and trigger leaks. For those who discover any broken elements, it is essential to interchange them earlier than reassembling the cannon.
O-Rings
The O-rings are chargeable for making a seal between the completely different elements of the cannon. They will turn into broken over time, so it is essential to examine them recurrently and exchange them if mandatory. When changing the O-rings, you’ll want to use the right dimension and kind of O-ring for the precise element.
Seals
The seals are additionally chargeable for making a seal between the completely different elements of the cannon. They will additionally turn into broken over time, so it is essential to examine them recurrently and exchange them if mandatory. When changing the seals, you’ll want to use the right dimension and kind of seal for the precise element.
Nozzles and Suggestions
The nozzles and ideas are chargeable for creating the stream of froth that the cannon produces. They will turn into clogged over time, so it is essential to wash them recurrently. To scrub the nozzles and ideas, use a gentle brush and heat water. Make sure to rinse them completely earlier than drying them.
Reassembling the Cannon
After getting cleaned and inspected the person elements of your Selkie foam cannon, it is time to reassemble it.
1. Insert the Ball Bearing into the Nozzle Physique
Find the small ball bearing and insert it into the nozzle physique, making certain it sits securely in place.
2. Insert the Nozzle Physique into the Venturi
Align the nozzle physique with the venturi and gently slide it in till it sits flush towards the inside floor.
3. Screw on the Adjustable Nozzle
Thread the adjustable nozzle onto the nozzle physique and hand-tighten it. Use a wrench if essential to additional tighten it.
4. Insert the O-Ring into the Nozzle Physique
Take the O-ring and place it across the base of the nozzle physique.
5. Screw on the Brass Nozzle
Thread the brass nozzle onto the nozzle physique, making certain that the O-ring is compressed between the 2 elements.
6. Insert the Chemical Tube into the Cleaning soap Reservoir
Push the chemical tube into the cleaning soap reservoir till it reaches the underside, making certain a cosy match.
7. Insert the Cleaning soap Reservoir into the Venturi
Align the cleaning soap reservoir with the venturi and slide it in till it clicks into place.
8. Screw on the Strain Washer Connection
Thread the strain washer connection onto the physique of the froth cannon and hand-tighten it. Use a wrench if essential to additional tighten it.
9. Insert the Spray Tip
Insert the spray tip into the highest of the adjustable nozzle, ensuring it sits securely.
10. Take a look at the Foam Cannon
Connect the froth cannon to your strain washer, join it to a water supply, and switch it on. Regulate the nozzle as mandatory to attain the specified foam consistency. Examine for any leaks and make sure the foam cannon is working accurately earlier than utilizing it together with your cleansing answer.
How you can Take Aside a Selkie Foam Cannon
Taking aside a Selkie foam cannon is an easy course of that may be accomplished in only a few minutes. By following these steps, you possibly can be sure that your foam cannon is correctly cleaned and maintained, which is able to assist it to carry out at its finest. You will have the next instruments to disassemble the cannon: a Phillips head screwdriver and a pair of pliers.
- Unscrew the highest cap of the froth cannon utilizing the Phillips head screwdriver.
- Take away the inside physique of the froth cannon from the outer physique.
- Use the pliers to take away the nozzle from the inside physique.
- Unscrew the filter display screen from the underside of the inside physique.
- Rinse all the elements completely with water.
- Reassemble the froth cannon within the reverse order of disassembly.
Folks Additionally Ask About How you can Take Aside a Selkie Foam Cannon
How typically ought to I take aside my Selkie foam cannon?
It is suggested to take aside your Selkie foam cannon each 2-3 months for cleansing and upkeep. This can assist to forestall the build-up of cleaning soap scum and different particles, which may clog the nozzle and trigger the froth cannon to malfunction.
What’s one of the simplest ways to wash a Selkie foam cannon?
One of the best ways to wash a Selkie foam cannon is to make use of a gentle cleaning soap answer and a gentle fabric. Keep away from utilizing harsh chemical compounds or abrasive cleaners, as these can harm the froth cannon.
Can I take advantage of my Selkie foam cannon with different varieties of cleaning soap?
Sure, you need to use your Selkie foam cannon with different varieties of cleaning soap. Nevertheless, it is very important observe that some soaps could produce extra foam than others. If you’re utilizing a brand new kind of cleaning soap, it’s best to begin with a low focus and progressively enhance the quantity till you obtain the specified stage of froth.
