The Honda Silverwing is a maxi-scooter that was first launched in 2001. It has been praised for its consolation, efficiency, and gasoline effectivity. Nonetheless, one frequent grievance in regards to the Silverwing is that it may be tough to entry the gasoline pump. This generally is a downside if the gasoline pump must be changed or repaired.
On this article, we are going to present you get to the gasoline pump on a Honda Silverwing. We are going to present step-by-step directions and pictures that can assist you full the duty. We can even present some recommendations on keep away from frequent errors.
Earlier than you start, you will need to collect the instruments and supplies that you’ll want. You will want a socket wrench, a Phillips screwdriver, and a flat-blade screwdriver. Additionally, you will want a brand new gasoline pump, if you’re changing the outdated one. After getting gathered the required instruments and supplies, you may start the method of eradicating the gasoline pump.
Figuring out the Location of the Gasoline Pump
The gasoline pump in a Honda Silverwing is an integral part that gives the engine with a steady provide of gasoline. It’s situated contained in the gasoline tank and is submerged within the gasoline, which helps to maintain it cool and lubricated. To entry the gasoline pump, you’ll need to take away the gasoline tank from the motorbike.
Listed here are the steps on get to the gasoline pump:
| Step | Description |
|---|---|
| 1 | Take away the seat. |
| 2 | Disconnect the gasoline line from the gasoline pump. |
| 3 | Take away the bolts that maintain the gasoline pump in place. |
| 4 | Pull the gasoline pump out of the gasoline tank. |
After getting eliminated the gasoline pump, you may examine it for any injury or put on. If the gasoline pump is broken, it is going to must be changed.
Getting ready for Gasoline Pump Entry
Earlier than you may entry the gasoline pump, you will must take a couple of preparatory steps. These steps will assist you to soundly and efficiently full the restore.
Collect your instruments and supplies
You will want the next instruments and supplies to finish this restore:
- Socket wrench set
- Screwdriver set
- Gasoline line pliers
- Gasoline filter
- Gasoline pump
- Gasoline
Security issues
When working in your automobile’s gasoline system, you will need to take security precautions to keep away from critical harm or injury. The next security issues needs to be noticed:
- Work in a well-ventilated space.
- Don’t smoke or use open flames close to the automobile.
- Put on security glasses and gloves.
- Disconnect the unfavorable battery terminal earlier than beginning work.
- Relieve gasoline system stress earlier than disconnecting any gasoline traces.
Find the gasoline pump
The gasoline pump is situated within the gasoline tank. To entry the gasoline pump, you’ll need to take away the gasoline tank from the automobile. The gasoline tank is usually situated below the rear of the automobile. After getting eliminated the gasoline tank, it is possible for you to to entry the gasoline pump.
Eradicating the Seat and Fairings
To entry the gasoline pump, you will must take away the seat and fairings. This is how:
1. Take away the Seat
Find the seat launch lever below the rear of the seat. Pull the lever in the direction of you and carry the seat off the bike.
2. Take away the Left Fairing
Find the fasteners holding the left fairing in place. Usually, you will discover two screws on the entrance, two on the again, and one or two alongside the facet. Take away all of the fasteners and thoroughly pull the fairing away from the bike.
3. Take away the Proper Fairing
Repeat steps for eradicating the left fairing for the correct facet, listening to detaching any further wires or parts that could be linked to the correct fairing, such because the flip sign connector, the gasoline line connector, or the exhaust pipe hanger.
| Element | Location | Removing Sort |
|---|---|---|
| Flip Sign Connector | Behind the fairing | Disconnect wire |
| Gasoline Line Connector | Close to the gasoline tank | Loosen clamp and detach |
| Exhaust Pipe Hanger | Backside of the fairing | Unbolt hanger |
Disconnecting Electrical Elements
Earlier than disconnecting any electrical parts, you will need to disconnect the unfavorable battery terminal to forestall electrical shocks or injury to the system. Listed here are the steps concerned in disconnecting {the electrical} parts:
1. Find the Gasoline Pump Electrical Connector
The gasoline pump electrical connector is usually situated close to the gasoline tank or gasoline pump. It’s a massive, waterproof connector with a number of wires operating to it.
2. Disconnect the Gasoline Pump Electrical Connector
To disconnect the gasoline pump electrical connector, merely press on the discharge tab and pull the connector aside. Don’t pull on the wires, as this will injury them.
3. Disconnect the Gasoline Pump Floor Wire (Non-compulsory)
In some circumstances, there could also be a separate floor wire linked to the gasoline pump. If there’s a floor wire, disconnect it by loosening the bolt or nut that secures it.
4. Detaching the Gasoline Pump Meeting from the Gasoline Tank
As soon as {the electrical} parts are disconnected, you may detach the gasoline pump meeting from the gasoline tank. This will require eradicating bolts, nuts, or clips that safe the meeting to the tank.
To offer additional steerage on detaching the gasoline pump meeting from the gasoline tank, take into account the next desk:
| Automobile Mannequin | Detachment Directions |
|---|---|
| Honda Silverwing 600 (2002-2008) | Take away the 4 bolts that safe the gasoline pump meeting to the gasoline tank. Gently carry the meeting straight as much as detach it. |
| Honda Silverwing 400 (2009-2018) | Disconnect the quick-release gasoline line connectors. Take away the 2 bolts that safe the gasoline pump meeting to the gasoline tank. Fastidiously carry the meeting straight as much as detach it. |
Draining Gasoline from the Gasoline Line
As soon as the gasoline line is disconnected from the gasoline pump, you may proceed to empty the gasoline from the road. That is finished to forestall gasoline from spilling or leaking out through the set up of the brand new gasoline pump.
To empty the gasoline from the gasoline line, observe these steps:
- Place an acceptable container beneath the gasoline line.
- Open the gasoline line by both disconnecting the quick-disconnect connector or loosening the gasoline line clamp.
- Permit the gasoline to empty into the container.
- As soon as the gasoline has stopped flowing, reconnect the gasoline line or tighten the gasoline line clamp.
- Dispose or recycle the gasoline drained from the gasoline line based on your native laws.
Desk: Gasoline Disposal
| Methodology | Directions |
|---|---|
| Get rid of gasoline at a waste assortment middle | Contact your native waste administration authority for directions on get rid of gasoline safely and legally. |
| Recycle gasoline | Find a recycling middle that accepts gasoline. Verify on-line or along with your native authorities for choices. |
| Use gasoline for different functions (e.g., cleansing components) | Filter the gasoline by means of a fine-mesh filter to take away any impurities. Use the filtered gasoline for cleansing or different non-automotive functions. |
Eradicating the Gasoline Tank
Earlier than accessing the gasoline pump, you have to take away the gasoline tank. This is how:
- Place the scooter on a steady floor and interact the parking brake.
- Take away the seat by lifting it and unhooking the latch.
- Find the gasoline line and disconnect it from the tank by urgent the discharge clip.
- Disconnect {the electrical} connector for the gasoline degree sensor.
- Unbolt the bolts securing the gasoline tank to the body.
- Fastidiously carry the gasoline tank and place it apart.
Be aware:
Take precautions when dealing with gasoline as it’s flammable. Guarantee good air flow and keep away from smoking or utilizing open flames close to the work space.
| Instruments Required | Description |
|---|---|
| Socket Wrench | For eradicating bolts securing the gasoline tank |
| Phillips Screwdriver | For disconnecting {the electrical} connector |
| Gasoline Line Disconnect Instrument | For releasing the gasoline line clip |
Accessing the Gasoline Pump Module
**1. Take away the seat.**
**2. Take away the battery.**
**3. Take away the battery field.**
**4. Take away the air cleaner field.**
**5. Take away the gasoline tank.**
**6. Take away the gasoline pump cowl.**
**7. Disconnect the gasoline traces and electrical connector.**
To disconnect the gasoline traces, use a pair of pliers to squeeze the discharge tabs on the gasoline line connectors and pull the gasoline traces off the gasoline pump. To disconnect {the electrical} connector, use a small screwdriver to launch the lock tab on the connector and pull the connector off the gasoline pump.
**8. Take away the gasoline pump.**
The gasoline pump is held in place by two screws. Take away the screws and carry the gasoline pump out of the gasoline tank.
**9. Examine the gasoline pump and substitute it if mandatory.**
Examine the gasoline pump for any injury or put on. If the gasoline pump is broken or worn, it should be changed.
**10. Reinstall the gasoline pump.**
To reinstall the gasoline pump, reverse the steps within the removing process. Make sure you tighten the screws that maintain the gasoline pump in place.
**11. Reinstall the gasoline tank.**
**12. Reinstall the air cleaner field.**
**13. Reinstall the battery field.**
**14. Reinstall the battery.**
**15. Reinstall the seat.**
Methods to Get to the Gasoline Pump
In case your Honda Silverwing is experiencing fuel-related points, it’s possible you’ll want to exchange the gasoline pump. This is a step-by-step information on get to the gasoline pump:
1. Security First
Earlier than you start, make sure the Silverwing is parked on a degree floor, the engine is off, and the ignition secret’s eliminated.
2. Take away the Seat
Find the seat lock, sometimes situated on the entrance or rear of the seat. Insert the important thing and switch it to launch the seat. Elevate the seat off the Silverwing.
3. Disconnect the Battery
Use a wrench to loosen the unfavorable battery terminal and disconnect the battery.
4. Take away the Gasoline Tank
Find the gasoline tank bolts, often discovered on the edges of the tank. Take away the bolts and thoroughly carry the gasoline tank off the body.
5. Take away the Gasoline Pump Cowl
Discover the gasoline pump cowl, sometimes secured by bolts or screws. Take away the quilt to reveal the gasoline pump.
6. Disconnect the Gasoline Traces
Fastidiously disconnect the gasoline traces linked to the gasoline pump. Use a gasoline line removing instrument for security.
7. Take away the Gasoline Pump
Find the gasoline pump bolts or screws. Take away them and gently pull the gasoline pump out of the meeting.
8. Examine and Exchange the Gasoline Pump
Examine the gasoline pump for injury or put on. If mandatory, substitute the gasoline pump with a brand new one. Guarantee the proper fitment and safe it with the bolts or screws.
| Half | Torque |
|---|---|
| Gasoline Pump Bolts | 8-10 Nm |
9. Reconnect
Join the gasoline traces to the brand new gasoline pump. Reinstall the gasoline pump cowl and gasoline tank.
10. Reconnect the Battery
Reconnect the unfavorable battery terminal and tighten it securely.
11. Set up the Seat
Place the seat on the Silverwing and interact the seat lock.
12. Begin the Engine
Insert the ignition key and begin the engine. Verify for any gasoline leaks and make sure the engine runs easily.
Reinstalling Elements in Reverse Order
9. Reinstall the Gasoline Pump and Filter
a. Align the gasoline pump with the gasoline tank and thoroughly insert it into the opening.
b. Safe the gasoline pump utilizing the mounting bolts and tighten them to the required torque.
c. Slide the gasoline filter onto the gasoline pump outlet and safe it with the clamp.
d. Reconnect the gasoline line to the gasoline pump and tighten the clamp.
e. Join {the electrical} connector to the gasoline pump.
f. Set up the gasoline pump cowl and safe it with the bolts.
10. Reinstall the Filler Cap
a. Exchange the filler cap and tighten it securely.
11. Reinstall the Battery
a. Join the optimistic battery terminal first after which the unfavorable terminal.
b. Tighten the battery terminals to the required torque.
12. Reinstall the Seat
a. Align the seat with the body and slide it into place.
b. Safe the seat with the seat bolt.
13. Verify for Leaks
a. Begin the engine and let it idle.
b. Verify for any gasoline leaks from the gasoline pump, gasoline filter, or gasoline line.
c. If any leaks are discovered, tighten the connections or substitute the broken parts.
Priming the Gasoline System
After changing your gasoline pump, you have to prime the gasoline system to make sure that there may be gasoline flowing to the engine. Listed here are the steps concerned in priming the gasoline system:
In case you have any leaks or if the engine doesn’t begin after priming, it’s possible you’ll must repeat these steps or seek the advice of with knowledgeable mechanic.
How To Get To The Gasoline Pump On A Honda Silverwing
The gasoline pump on a Honda Silverwing is situated within the gasoline tank. To entry the gasoline pump, you’ll need to take away the gasoline tank from the motorbike.
To take away the gasoline tank, observe these steps:
- Flip off the gasoline petcock.
- Disconnect the gasoline line from the gasoline tank.
- Take away the bolts that safe the gasoline tank to the body.
- Fastidiously carry the gasoline tank off of the motorbike.
As soon as the gasoline tank is eliminated, you’ll need to take away the gasoline pump from the gasoline tank. To take away the gasoline pump, observe these steps:
- Disconnect {the electrical} connector from the gasoline pump.
- Take away the bolts that safe the gasoline pump to the gasoline tank.
- Fastidiously carry the gasoline pump out of the gasoline tank.
As soon as the gasoline pump is eliminated, you may substitute it with a brand new gasoline pump. To put in a brand new gasoline pump, observe these steps:
- Insert the brand new gasoline pump into the gasoline tank.
- Safe the gasoline pump to the gasoline tank with the bolts.
- Join {the electrical} connector to the gasoline pump.
- Reinstall the gasoline tank on the motorbike.
- Join the gasoline line to the gasoline tank.
- Activate the gasoline petcock.
Individuals Additionally Ask About Honda Silverwing How To Get To The Gasoline Pump
What are the signs of a nasty gasoline pump on a Honda Silverwing?
The signs of a nasty gasoline pump on a Honda Silverwing can embrace:
- Problem beginning the motorbike
- Engine stalling
- Lack of energy
- Decreased gasoline mileage
How a lot does it value to exchange a gasoline pump on a Honda Silverwing?
The associated fee to exchange a gasoline pump on a Honda Silverwing can fluctuate relying on the yr and mannequin of the motorbike. The typical value to exchange a gasoline pump on a Honda Silverwing is between $200 and $400.
How lengthy does it take to exchange a gasoline pump on a Honda Silverwing?
It takes about 1-2 hours to exchange a gasoline pump on a Honda Silverwing.
