Placing on a lens keeper is a straightforward however necessary step within the means of carrying contact lenses. This gadget helps to maintain your lenses clear and guarded when they don’t seem to be in use. By following a couple of easy steps, you possibly can be certain that your lens keepers are placed on appropriately and that your contact lenses are protected and cozy to put on.
Step one is to clean your fingers completely with cleaning soap and water. This can assist to stop any micro organism or dust from getting in your lenses or lens keepers. As soon as your fingers are clear, open the lens keeper and fill it with recent contact lens resolution. Ensure that to fill the keeper to the fill line, however don’t overfill it. Then, place your contact lens within the keeper, ensuring that it’s utterly submerged within the resolution. Shut the keeper tightly and shake it gently to combine the answer and to make sure that the lens is clear. Repeat this course of for the opposite contact lens.
As soon as your contact lenses are within the lens keepers, you possibly can retailer them in a cool, dry place. Don’t retailer them within the fridge, as this may harm the lenses. When you find yourself able to put on your contact lenses, merely take away them from the lens keepers and rinse them with recent contact lens resolution. Then, insert the lenses into your eyes. By following these easy steps, you possibly can assist to make sure that your contact lenses are clear and protected to put on.
Gathering Important Supplies
Earlier than you start the method of placing on Lens Keeper, it’s essential to assemble all the required supplies. These supplies will guarantee that you’ve got a clean and cozy expertise. This is what you will want:
Supplies Listing
Here’s a complete record of important supplies:
1. Lens Keeper gadget: That is the first gadget that may allow you to insert and take away your contact lenses. It is a small, handheld gadget with two delicate, versatile cups.
a.Be certain that the Lens Keeper is clear and freed from any particles or harm.
b.Examine the cups for any tears or irregularities.
c.If the Lens Keeper has not been used for an prolonged interval, think about soaking it in a contact lens cleansing resolution for disinfection.
d.Rinse the Lens Keeper completely with sterile water earlier than use.
2.Contact lenses: These are the corrective lenses that you’ll be inserting into your eyes.
3.Contact lens resolution: This resolution is used to wash and retailer your contact lenses. Ensure that to make use of an answer that’s really useful on your particular kind of contact lenses.
4.Mirror: A mirror will allow you to see what you are doing when inserting and eradicating your contact lenses.
5.Tissue or towel: This shall be used to dry your fingers earlier than dealing with your contact lenses.
Aligning the Lenses
Aligning the lenses appropriately is essential for optimum lens efficiency and cozy put on. Comply with these steps to make sure correct alignment:
1. Learn the Lens Orientation Directions
Seek the advice of the packaging or directions supplied along with your lens keeper to find out the correct orientation of the lenses.
2. Place the Lenses in Their Designated Slots
The lens keeper sometimes has two slots, one for every lens. Gently place every lens within the corresponding slot, guaranteeing they’re dealing with the right path.
3. Verify the Alignment Markers
Most lens keepers have alignment markers or indents that point out the right place for the lenses. Align the lenses with these markers to make sure they’re correctly seated.
4. Double-Verify the Alignment
As soon as the lenses are in place, gently faucet the lens keeper to settle them. Examine the lenses once more to make sure they’re appropriately aligned. If any lens seems misaligned, fastidiously regulate it whereas concurrently holding down the other lens.
| Troubleshooting Alignment Points | Options |
|---|---|
| Lenses should not sitting flush | Make sure the lenses are correctly aligned with the markers. Gently faucet the lens keeper to settle them additional. |
| Lenses are tilted | Reposition the lenses by fastidiously lifting one edge and adjusting it whereas holding down the other lens. |
| Lenses are overlapping | Take away the lenses and reinsert them one by one, guaranteeing they’re dealing with the right path. |
Securing the Lid
Efficiently securing the lid is essential for guaranteeing a correct seal and stopping moisture or particles from coming into the lens keeper. Comply with these detailed steps to finish this activity successfully:
1. Align the Lid Correctly
Be certain that the lid is positioned appropriately over the bottom of the lens keeper. It ought to match snugly into place with no gaps or misalignments.
2. Rotate the Lid Clockwise
As soon as the lid is correctly aligned, start rotating it clockwise. Apply light however agency stress to safe the lid. It’s possible you’ll really feel a slight resistance because it tightens.
3. Proceed Rotating Till Resistance
Proceed rotating the lid till you are feeling a noticeable resistance. This means that the lid has been totally tightened and secured.
4. Verify for Tightness
To make sure a safe match, attempt to pull the lid off the bottom. If it stays mounted, the lid is sufficiently secured.
5. Wipe Off Extra Moisture
After securing the lid, use a clear fabric or tissue to wipe away any extra moisture or residue from the lid and base. This helps stop moisture from coming into the lens keeper.
6. Non-obligatory: Further Securing Strategies
For added safety, think about using these non-compulsory strategies:
| Methodology | Steps |
|---|---|
| Tape | Wrap a small piece of tape across the lid and base to strengthen the seal. |
| Elastic Band | Wrap an elastic band across the lid and base to take care of a safe match. |
| Shrink Wrap | Use shrink wrap to cowl your complete lens keeper, guaranteeing a decent seal and defending the lenses from moisture. |
Troubleshooting Widespread Points
When inserting your lens into the Lens Keeper, it’s possible you’ll encounter some widespread points. Listed below are some options:
1. Lens will not be becoming correctly
Rigorously regulate the lens till it sits snugly within the designated spot.
2. Lens will not be seen
Be certain that the lens is dealing with the right approach. Flip it over if vital.
3. Lid will not be closing
Ensure that the lid is aligned appropriately and isn’t obstructed by any particles.
4. Lens is falling out
The lens might not be seated correctly. Take away and reinsert it, ensuring to use light stress.
5. Lid is simply too tight
Apply slight stress on each side of the lid to launch it. Watch out to not use extreme power.
6. Lens is scratched
Keep away from touching the lens instantly along with your fingers. Use a delicate fabric or lens cleansing package to wash it gently.
7. Lens is soiled
Use a lens cleansing resolution or wipes to take away any dust or particles.
8. Lens is cracked or broken
If the lens is severely broken, discontinue use and seek the advice of with a watch care skilled.
9. Lens will not be popping up
Guarantee that you’re urgent the discharge button firmly. If the lens nonetheless doesn’t pop up, gently faucet the Lens Keeper on a flat floor to dislodge it. Alternatively, you need to use a small object like a toothpick to softly pry the lens out.
| Troubleshooting Steps | Doable Options |
|---|---|
| – Press the discharge button firmly | – The lens ought to pop up |
| – Faucet the Lens Keeper on a flat floor | – This may increasingly dislodge the lens |
| – Use a small object to softly pry the lens out | – Watch out to not harm the lens |
How To Put On Lens Keeper
Inserting contact lenses could be a daunting activity, but it surely turns into much more difficult when it’s a must to use a lens keeper. A lens keeper is a small, spherical gadget that helps to maintain your contact lenses in place. It may be made from a wide range of supplies, together with silicone, hydrogel, and PMMA. Lens keepers can be found in numerous shapes and sizes to accommodate several types of contact lenses.
To placed on a lens keeper, first wash your fingers completely. Then, rinse the lens keeper with saline resolution. Subsequent, place the lens keeper in your finger, after which place the contact lens on high of the lens keeper. Lastly, gently insert the lens keeper into your eye. The lens keeper will assist to maintain the contact lens in place, and it’ll additionally shield the contact lens from harm.
Folks Additionally Ask About How To Put On Lens Keeper
How do I select the proper lens keeper?
The most effective lens keeper for you’ll rely on the kind of contact lenses you put on. For those who put on delicate contact lenses, you will want a lens keeper that’s made from a delicate materials, resembling silicone or hydrogel. For those who put on exhausting contact lenses, you will want a lens keeper that’s made from a extra sturdy materials, resembling PMMA.
How typically ought to I clear my lens keeper?
You must clear your lens keeper daily. This can assist to stop the build-up of micro organism and different contaminants.
Can I sleep with my lens keeper in?
No, you shouldn’t sleep along with your lens keeper in. This may enhance your threat of growing a watch an infection.
